Storage method of ginger

Ginger is a very important side dish in China, which has a very large planting area in our country. The nutritional value of ginger is very high, and it has the effect of treating migraine, ventilation and other diseases. The output of ginger is also relatively high, if not all of it can be sold after harvest, then it is necessary to do a good job of storage to avoid mildew and deterioration. So the editor brings you the method of storing ginger today. Let's have a look!

1. Closed storage

Before closed storage, we must first do a good job in the selection of ginger, keep good quality ginger, and pile it in the warehouse. Then cover the ginger with grass curtains and other items, ready for storage. To build a small warehouse facing south of the warehouse, we should pay attention to plugging the small cracks in the brick wall to avoid the invasion of thieves and cold wind. The stacking height of ginger should not exceed 2 meters, and the appropriate Reed ventilator should be put into the ginger pile to improve the permeability of the ginger pile. In the closed storage, the space in the corner should be narrowed as much as possible, and the middle can be loosened appropriately.

2. Digging holes for storage

Digging pit storage should first choose a good location, generally to ensure that the digging pit area has a higher groundwater level, in digging the pit, the depth can be maintained in no water, generally no more than 1 meter. Control the diameter and shape of the pit according to the storage quantity. Generally speaking, it is necessary to ensure that a pit can store about 5000 jin. Put a handful of straw in the center of the pit to promote the ventilation of the ginger pit, and can also do a good job of temperature measurement. Then put the ginger neatly in the pit, after placing a layer, put a layer of ginger leaves, cover the soil on the ginger leaves, and then cover the soil layer by layer as the temperature drops.

3. Sediment burial

When using sediment burial, we first need to build a small space, the height is controlled at 80 cm, the width is controlled at about 100 cm, and the degree is controlled according to the actual situation. Then cover the bottom with a layer of sediment about 5 centimeters thick to maintain a water content of about 10 centimeters. Then insert the right amount of ventilator, choose strong, good quality ginger, first lay a layer of ginger, and then spread a layer of mud. Pile it all the way to about 5 centimeters from the opening. Then cover it with sand to avoid direct contact with the air.

4. Air-raid shelter storage

In fact, the storage of air-raid shelter is not much different from that of sand burial, which is to put a layer of ginger and then lay a layer of sand. The difference, however, is to pile the ginger into a haystack-like shape. Each stack weighs about 4000 jin, and then a thin bamboo pole with a diameter of about 10 cm should be placed in the middle of the stack as a ventilation tool for the stack. And it is best to put a thermometer to measure the temperature. Then do a good job of sealing the stack to avoid air leakage.

The above is a brief introduction to the storage methods of ginger. There are many storage methods of ginger, and we should choose the storage methods reasonably according to the actual situation. That's all for today's introduction. This article is for reference only. I hope it can help you all.