Pruning modeling method of asparagus bonsai

Potted asparagus is favored by the general public because it is easy to grow, beautiful and generous, and absorbs toxic gases. The whole plant of asparagus is green, the stems and branches are slender but tall and straight, and the leafy branches extend horizontally like a triangle, degenerating into membranous scaly leaves, which are attached to the branches like down. Because its stem is clustered from the root, the height is different, so that the cloud-like branches and leaves are stacked one after another, so it is also known as cloud bamboo.

If you want to make the green and elegant appearance of asparagus, it must be pruned in time (spring or autumn).

There are two methods to propagate asparagus: sowing and ramet. Asparagus, which has been cultivated for about a year by sowing and propagation, should mainly strengthen the management of its natural growth during the growing period. When you see the new stem growing and reaching a certain height, that is, the whole leaf base, especially the branches at the top of the stem, the position of the flowerpot should be determined according to your own requirements, and the new branch will extend horizontally toward the sun. Asparagus in this period generally does not grow new stems with climbing performance, so the plant type generally does not need to be pruned, just need proper binding. Asparagus, which has been cultivated for about two years, begins to grow climbing new stems, which can be dealt with in different ways according to individual specific conditions and hobbies. You can let it grow by hanging rope naturally, or you can attach it to the old stems and branches of flower racks or asparagus, or cut off some at will. But the two practices mentioned later not only affect the growth of asparagus, but also damage the beauty of the whole plant, it is best to carry out proper pruning. The method is to trim the long old stem several times according to the shape of the whole plant and personal requirements, and cut off all or part of the upper part of the old stem with branches and leaves. In order to make the new branches from the leaf base of the old stem after pruning have a certain level, there should be a difference between the adjacent old stems when pruning. After pruning the old stem for about 20 days, new branches and leaves will sprout from the uppermost leaf base. As for the method of determining the extension direction of the newly grown branches and leaves, it is the same as mentioned above.

The newly grown branches and leaves should not touch other branches or objects during the growth period, otherwise it will affect the normal growth of new branches and leaves and the beauty of plant type.

In order to make the whole asparagus grow well and have a beautiful appearance, it is also necessary to cut off the overdense, withered yellow branches and delicate stems to facilitate ventilation and light, promote growth and be beneficial to ornamental.

As the branches and leaves of asparagus extend horizontally, it is easy to fall on dust, which is not good for its growth and beauty, so it needs to be sprayed with water to remove dust. Before spraying water, it is best to gently shake the stems and leaves with your hands, or blow with an air pump, first remove some floating dust, and then spray and wash slowly with a fine hole spray can, so that the effect is better. Gently shake off the water droplets left on it after spraying. Some people use transparent plastic pockets to cover asparagus against dust temporarily, although this is also possible, but it will affect ventilation, lighting, and is not conducive to viewing.

When binding asparagus, it is not appropriate to insert thick bamboo and wood strips and use too thick rope in the box, so as not to set off the slender stems and branches of asparagus. Apply thin thread with similar color to asparagus to bind stems, branches and adjust plant type, so as not to affect its verdant appearance. Reasonable management, potted asparagus will make your room take on a new look.

Asparagus is a plant with high ornamental value, which can be placed in the living room and study to purify the air and add bookish flavor at the same time. Potted plants are mainly foliage, fresh and elegant, and the layout of the study shows more scrolls. Asparagus has slender branches and leaves, tall and straight beautiful, dense green, chic posture, so it has also become a common potted plant for scholars to work and live. There are also many people who like to shape asparagus. Today, let's talk about the styling of asparagus.

The commonly used modeling methods of asparagus are as follows:

1. Pot control method: the ratio of flowerpot to plant size should be 1:3, which can limit the growth of root system and keep the plant size unchanged.

2. Remove the growing point: when the new bud reaches 2~3cm, it can promote the regeneration of branches and leaves on the stem, control its non-growing vines, flatten out the branches and leaves, and make the plant shape plump.

3. Making use of the phototaxis of asparagus: turning the direction of the flowerpot at the right time can modify the growth shape of branches and leaves and keep the plant type unchanged.

4. Object shielding method: that is, using a piece of hard paper to press the branches and leaves or cover the sun, so that when the branches and leaves are growing, the stems will turn or bend when they encounter objects, so as to achieve the purpose of modeling.

5. The comprehensive application of several modeling methods:

(1) Tower type: choose 3 tall and straight beautiful stems of 2 murmurs as the main peak, remove all the growing points on the stems, and set the plant height as 30 Murray 35 cm. The remaining branches and new stems should not be higher than the main peak. For new buds, the thickness of their stems can be used to determine whether or not to remove the growing point. If the stem is thicker than the main peak, it should be removed, and if it is thinner than the main peak, it is not necessary to pick and let it grow. At the same time, it is necessary to adjust the plant shape continuously by using the object shielding method and its own phototaxis.

(2) double-cluster type: plant two asparagus plants in the basin, about 30 cm high and 18 cm low, and then look like tower asparagus during the growth period.

(3) Natural style: it is mainly the plant type of natural growth of asparagus, and the basic methods such as picking off the growing point, covering and making use of its phototaxis are still used to stretch the branches and leaves and give people a natural sense of beauty.

It is important to note that:

1. The shaping of asparagus must be carried out with the control of fertilizer and water. That is, at room temperature 15 ℃ and 18 min, water should be watered once a week to keep the basin soil moist (it is appropriate to press with fingers). No fertilizer or less fertilizer.

2. Asparagus should change the basin once a year and increase year by year. If you do not change the big basin, you can turn the basin to remove part of the small roots, replace the new soil, plant in the original pot, pay attention to the renewal of stems and branches, and remove the aging, sick and residual stems and branches at any time.

Time: 2019-06-12 Click: