MySheen

How to raise rainbow jade the culture method of rainbow jade

Published: 2024-12-22 Author: mysheen
Last Updated: 2024/12/22, How to raise rainbow jade the culture method of rainbow jade

Friends who like succulent plants. I believe it is no stranger to rainbow jade, it should be our favorite one for raising succulent plants, but how to grow well? Let me give you a specific introduction.

First, the jade of the rainbow

Hongzhiyu is a perennial succulent herb. The plant is low and tufted, and the leaves are inflated into ovate or cylindrical shape, alternate, 0.6 ha 1.2 cm long, the apex is obtusely round, bright green, smooth. Umbels pendulous, flowers white. The florescence is from June to August.

Habits: sex likes warmth and is not resistant to cold. Like light, have strong drought tolerance. The suitable temperature for growth is 10 ℃-28 ℃. It has strong adaptability and lax requirements on soil.

Watering: slow growth, drought resistance, and do not need too much water, so it is not suitable for heavy water, dry watering and thorough watering should be seen, while the amount of water and times should be reduced when the room temperature is low in winter. Organic liquid fertilizer is usually applied once a month. Plant growth, after many years of old plant branches, we must pay attention to watering, too much water will lead to branch rot. Generally, after 3 years of cultivation, the plant shape begins to be scattered, so it should be pruned in advance.

Ventilation: higher requirements for ventilation, edible red pottery, such as a strong breathable flowerpot is the best, pay attention to maintain good ventilation in summer.

Reproduction: adopt the method of stem insertion, stem insertion and leaf insertion, which is also a kind of variety which is very easy to breed. Stem insertion can be made use of pruned branches, cut off 5 cm of stem section, it is best to dry in a cool place for 3 to 5 days, wait for the incision to dry and then insert into the seedbed. Leaf insertion propagation is to remove the complete leaves from the stem, be careful not to damage the leaves, and then insert them after 3 days. This method has a large reproduction coefficient and is suitable for mass reproduction, but the forming is slow.

Disease: rainbow jade disease is less, occasionally occur leaf spot and stem rot. Leaf spot is mainly caused by poor ventilation and high air humidity. Internal absorption fungicides can be used for prevention and control. Improving ventilation is the key to prevent leaf spot disease. Stem rot is mostly caused by excessive humidity in winter.

Second, how to raise rainbow jade

There are three elements in planting rainbow jade: soil, moisture and light.

Soil: the breeding soil of Hongzhi Yujin uses cinder mixed peat, and flower friends who think that they are not good-looking can be laid with pure river sand or other particles. The jade brocade of the rainbow is the same as the jade of the rainbow, it is easy to grow tall without light, so in order to be more beautiful, it is generally necessary to trim so that the old pile will be beautiful. The soil should be loose and ventilated, and it must not be wet. It is easy to rot the roots if they do not dry. Do not use pastoral soil, the novice had better be succulent soil.

Moisture: watering should be dry and wet, and if you can't stand it, it will be watered once a week, and it will be reduced or even broken in summer and winter.

Temperature and light: the rainbow jade brocade should fully see the sun during the growing period. Summer temperature is higher than 35 degrees is easy to sunburn, can be appropriate shade or half-sun, avoid direct light at noon. The growth of rainbow jade brocade is not too slow, the plant is more resistant to drought, dry and wet, and the culture soil is mainly soft and breathable.

Main points of cultivation:

Rainbow jade likes a warm, dry and sunny environment. Not resistant to cold, drought and strong light, avoid dampness. Pot soil can be mixed with garden soil and a certain amount of coarse sand. The suitable temperature for growth is 13 Mel 18 degrees Celsius, and the winter temperature is not less than 5 degrees Celsius. During the growing period, keep the basin soil moist, reduce watering in winter, and keep the basin soil slightly dry. Stems that grow too high and too dense or too many fleshy leaves fall should be pruned to maintain the beauty of the plant type.

Methods of reproduction:

The propagation of rainbow jade can be done by cuttings, stems and leaves. Stem insertion can be made use of pruned branches, cut into about 5 cm, dry in a cool place for 3 to 5 days, and then inserted into the seedbed after a little dry at the incision. The soil of the seedbed is soft. Leaf insertion propagation is to remove the complete leaves from the stem, be careful not to damage the leaves, and then sow them after drying for 3 days. During the insertion process, carbendazim solution can be sprayed to sterilize. A ratio of 800 or 1000 is 1. Rainbow jade does not have any diseases and insect pests, ventilation is fine.

Third, the culture method of rainbow jade

I. Culture methods

Growth habits, rainbow jade can be cold-resistant, when there is plenty of sunshine in midsummer, the leaf tip will turn red, the adaptability to temperature is strong, and the environment with obvious temperature difference between day and night is more conducive to its growth.

Propagation, rainbow jade reproduction methods are mostly used to cut, stem and leaf insertion, stem insertion method first intercept the pruned stems and leaves, it is best to hang in the shadow for three or five days, so that the incision is slightly dry, and then inserted into the seedbed. Leaf insertion method is to select complete leaves and insert them after three days. Leaf insertion method is mostly suitable for mass reproduction, but the deficiency is that leaf insertion method is slow to grow up.

Daily maintenance, rainbow jade in the temperature cooling and light enhancement, the leaves will turn red, so in order to improve the ornamental value of rainbow jade, can be artificially cooled. Rainbow jade is slow-growing and drought-resistant, so it is not suitable for big fertilizer and water. It can be watered with organic liquid fertilizer once a month. It is usually placed in a well-ventilated place.

Disease prevention and control, rainbow jade rarely occur diseases and insect pests, and the occasional leaf spot disease is also caused by poor ventilation or high air humidity, so ventilation conditions are the key to the occurrence of diseases.

II. Points for attention

Rainbow jade is small and exquisite, very lovely, potted with some rocks, more artistic conception, can be placed next to the computer TV, can absorb radiation, placed indoors can also play a role in purifying the air and absorbing formaldehyde. Although rainbow jade likes light, high temperature exposure in summer will cause rainbow jade leaves to burn, so it should be shaded properly.

Rainbow jade is easier to raise, as long as less watering, more light and good ventilation can make it grow very well. in addition, rainbow jade can also be planted with other succulent plants, crowded and bustling, pulling and pulling, very lively. These beautiful and messy little plants will certainly bring a lot of fun to life.

Third, the culture method of rainbow jade

I. Culture methods

Growth habits, rainbow jade can be cold-resistant, when there is plenty of sunshine in midsummer, the leaf tip will turn red, the adaptability to temperature is strong, and the environment with obvious temperature difference between day and night is more conducive to its growth.

Propagation, rainbow jade reproduction methods are mostly used to cut, stem and leaf insertion, stem insertion method first intercept the pruned stems and leaves, it is best to hang in the shadow for three or five days, so that the incision is slightly dry, and then inserted into the seedbed. Leaf insertion method is to select complete leaves and insert them after three days. Leaf insertion method is mostly suitable for mass reproduction, but the deficiency is that leaf insertion method is slow to grow up.

Daily maintenance, rainbow jade in the temperature cooling and light enhancement, the leaves will turn red, so in order to improve the ornamental value of rainbow jade, can be artificially cooled. Rainbow jade is slow-growing and drought-resistant, so it is not suitable for big fertilizer and water. It can be watered with organic liquid fertilizer once a month. It is usually placed in a well-ventilated place.

Disease prevention and control, rainbow jade rarely occur diseases and insect pests, and the occasional leaf spot disease is also caused by poor ventilation or high air humidity, so ventilation conditions are the key to the occurrence of diseases.

II. Points for attention

Rainbow jade is small and exquisite, very lovely, potted with some rocks, more artistic conception, can be placed next to the computer TV, can absorb radiation, placed indoors can also play a role in purifying the air and absorbing formaldehyde. Although rainbow jade likes light, high temperature exposure in summer will cause rainbow jade leaves to burn, so it should be shaded properly.

Rainbow jade is easier to raise, as long as less watering, more light and good ventilation can make it grow very well. in addition, rainbow jade can also be planted with other succulent plants, crowded and bustling, pulling and pulling, very lively. These beautiful and messy little plants will certainly bring a lot of fun to life.

 
0