MySheen

Introduction to the planting method of hyacinth bulb

Published: 2024-11-06 Author: mysheen
Last Updated: 2024/11/06, Introduction to the planting method of hyacinth bulb

Introduction to the planting method of hyacinth bulb

Introduction of hyacinth bulbs how to grow soil culture methods:

first

The soil and bulbs need to be sterilized. Wash the seed balls with carbendazim and other water and soak the soil. After soaking the soil, it needs to dry, and then add the nutrient solution such as Cuiyun B1, which can promote rooting. If you have a microwave oven at home, you can put the soil in the microwave oven for a minute, then take it out to cool it and use it.

Second

Soil needs well-ventilated soil, and ordinary cultivated soil is also fine. Remember, this soil needs to be sterilized and has been soaked in rooting solution, B1 and other nutrient solutions. Then put the seed ball uncovered on the soil. Then pounce on the beautiful fossils, or the small stone fixed 1/4 of the bulb, that is, the root position of the bulb is about 1-2 square meters.

Third

The newly planted bulbs do not need to be soaked and watered, and when the newly planted soil evaporates 50% of the moisture, it will be watered by soaking. The water of soaking method needs to use B1 and other rooting nutrient solution. Immersion: irrigation in which a small bowl or plate is placed under a flowerpot and water is placed in the bowl and plate without watering directly from the flowerpot. The key point of soil culture: do not irrigate too much water, but you can spray water into the surrounding air to increase air humidity. There is no need to sprinkle water into the air when soaking.

Introduction to the hydroponic culture method of hyacinth bulbs:

first

The balls still need to be sterilized, and the containers are V-shaped or shallow dishes of the kind raised by daffodils. You can also choose from other containers, and I'll say at the end of the list.

Second

After mixing the rooting nutrient solution, such as rooting agent, Cuiyun B1 solution, etc., into the V-shaped container, just put the seed ball into it. The nutrient solution only needs to reach the bottom of the bulb. If the container is transparent, cover the container with black cloth or dark cloth. After shading, put into the room with light, do not put the sun is too strong or too cold, too dark, otherwise the bud is very weak.

The shallow dish is used to put the beautiful fossils and fix the bulb, so that the water can only reach the root of the bulb.

Other containers, such as bowls, or watertight flowerpots with no bottom hole. Use all the beautiful fossils to fill, the seed ball is placed on top, and then the moisture is still to the root, not too high. It's easy to rot.

The key to hydroponics: transparent containers should be shaded. First put it in a place with ordinary light, then sprout, and then move to a place with more light. Don't suddenly move from a general place of light to a place where there is plenty of light. Only slowly increase the light, the progressive time is 3 days-1 week, move to the next place with more light.

Matters needing attention in planting hyacinth bulbs

1. The handling of the ball. Balls should be disinfected before planting, otherwise they will cause mildew, especially soil species. Anther carbendazim tulips, hyacinths and other necessary fungicides; anther carbendazim methyl (commonly known as methyl thiophanate) 5g bulb disinfection, killing fungi, carbendazim and other drugs that can kill fungal bacteria. After buying the fungicide, it will be mixed into a solution of 1VR 1000 (it doesn't have to be so accurate, it's almost all right. During disinfection, peel off the brown skin of the ball and wash the mildew spots on the epidermis. If there is a large area, peel another layer of skin. The lateral bulbs born on the edge of the ball are removed and retained will consume the nutrition of the flower bulb. After washing, soak the ball in disinfectant for about half an hour. And then take it out to dry. After disinfection, you have to prepare the seed, and after soaking in water, it will take root.

2. The choice of basin. What size pot is suitable for native potted plants? In general, hyacinths grow one ball in pots with a diameter of 8 to 10 meters and 4 balls in pots with a diameter of 20 meters.

3. Planting depth. In the case of soil, the ball is buried and exposed to the tip of the soil, 1 mm to 2 mm.

4. Fertilizer. Hyacinth bulbs like soil with plenty of phosphorus and potassium, so before planting, if there are buds refined bone powder (200 grams) Cui Lei, promote flowers and fruits on the bottom of the basin, will make them grow very well.

5. rooting and sprouting. Hyacinth and other bulbous plants, rooting needs a lower temperature, generally about 10 degrees. It takes about 14 days to take root. Just leave it on the open balcony after planting. So after planting, found that there has been no movement, in fact, do not worry, by this time the root has already grown a long time. During rooting, it is best to cover the paper shell or cover a paper tube, so that the newborn buds can not see light, can prevent neck disease, neck disease refers to hyacinth flower stem does not grow, not tall, stuck in the middle of flowering. You can take it off in two weeks. [bulb perimeter (rice)] 17gram 18 [planting depth (rice)] 0Mel 10 [fragrance (grade)] 1 [florescence] flowering in March and April under natural conditions.

6. Watering. Don't dry or water before sprouting. There are no rules for watering plants, and hyacinth needs a lot of water, especially during vegetative growth and flowering, during which the soil can be kept moist on the premise of sufficient direct light and soil regardless of water. that is, the soil surface is dry and watered. If the direct light is poor, the watering time can be extended appropriately. Be careful not to pour it into Ye's heart when watering.

7. maintain to blossom. After the low temperature promotes the root growth, the temperature is slightly higher and the leaves are longer, and finally there is higher temperature and sufficient sunlight, which can make the stems and leaves plump and the flowers flourish. Hyacinth is more hardy, there must be enough direct light during the day, otherwise the plant will grow too long, and the serious ones will not blossom. When blooming, put it in a bright light for 4 hours a day. You can enjoy it indoors at other times. Generally speaking, it takes about 50 to 60 days from planting to flowering.

8. Post-anthesis treatment. If the nutrition of native hyacinth can keep up, it can continue to blossom in the second year. When shedding after flowering, cut it off from half of the flower stem to prevent it from rotting down because the cut is too low. Continue to apply fertilizer, maintain the growth of green leaves and accumulate nutrients. Be careful not to water the ball when watering. Close to June, gradually reduce the amount of water, wait until the leaves are yellow, dig out.

How to plant hyacinth bulbs and how to make hyacinth bulbs blossom continuously

1. Disinfect the seed ball, soak the seed ball with 1000 methyloxylate for 20 minutes, then plant it in a prepared container, cover the upper soil layer with 4 to 5 meters, put it in an environment of about 9 ℃ after planting, and begin to take root in about 15 days.

2. The rooting bulb was placed under the condition of 15 ℃ to 18 ℃ to promote flowering, and it could blossom after 50 to 60 days.

3. To regulate the florescence and understand the characteristics of varieties, that is, the growth period of early, middle and late varieties, and the date of flowering is pushed forward, that is, the date of promoting flowering.

4. Keep the seed bulb after flowering and keep it in a cooler environment to keep it growing well and cut off the flower branches. Pay attention to timely application of rotten fertilizer to promote the fullness of the ball. Pay attention to pest control throughout the growing season.

5. the weather is getting colder in late autumn. put the pot outside to let it germinate again, repeat the germinated balls according to the second rule, and blossom again when needed.

6. for the seed bulbs without low temperature treatment, put them in a natural cold environment for low temperature treatment, and the seed balls can promote flowers after germination.

6. Watering. Don't dry or water before sprouting. There are no rules for watering plants, and hyacinth needs a lot of water, especially during vegetative growth and flowering, during which the soil can be kept moist on the premise of sufficient direct light and soil regardless of water. that is, the soil surface is dry and watered. If the direct light is poor, the watering time can be extended appropriately. Be careful not to pour it into Ye's heart when watering.

7. maintain to blossom. After the low temperature promotes the root growth, the temperature is slightly higher and the leaves are longer, and finally there is higher temperature and sufficient sunlight, which can make the stems and leaves plump and the flowers flourish. Hyacinth is more hardy, there must be enough direct light during the day, otherwise the plant will grow too long, and the serious ones will not blossom. When blooming, put it in a bright light for 4 hours a day. You can enjoy it indoors at other times. Generally speaking, it takes about 50 to 60 days from planting to flowering.

8. Post-anthesis treatment. If the nutrition of native hyacinth can keep up, it can continue to blossom in the second year. When shedding after flowering, cut it off from half of the flower stem to prevent it from rotting down because the cut is too low. Continue to apply fertilizer, maintain the growth of green leaves and accumulate nutrients. Be careful not to water the ball when watering. Close to June, gradually reduce the amount of water, wait until the leaves are yellow, dig out.

How to plant hyacinth bulbs and how to make hyacinth bulbs blossom continuously

1. Disinfect the seed ball, soak the seed ball with 1000 methyloxylate for 20 minutes, then plant it in a prepared container, cover the upper soil layer with 4 to 5 meters, put it in an environment of about 9 ℃ after planting, and begin to take root in about 15 days.

2. The rooting bulb was placed under the condition of 15 ℃ to 18 ℃ to promote flowering, and it could blossom after 50 to 60 days.

3. To regulate the florescence and understand the characteristics of varieties, that is, the growth period of early, middle and late varieties, and the date of flowering is pushed forward, that is, the date of promoting flowering.

4. Keep the seed bulb after flowering and keep it in a cooler environment to keep it growing well and cut off the flower branches. Pay attention to timely application of rotten fertilizer to promote the fullness of the ball. Pay attention to pest control throughout the growing season.

5. the weather is getting colder in late autumn. put the pot outside to let it germinate again, repeat the germinated balls according to the second rule, and blossom again when needed.

6. for the seed bulbs without low temperature treatment, put them in a natural cold environment for low temperature treatment, and the seed balls can promote flowers after germination.

 
0