How to reproduce plum blossom
How to reproduce plum blossom, the breeding methods of plum blossom are: sowing, grafting and cutting. Because the first two methods are too long and troublesome, the cutting propagation method is more suitable for the family.
Soilless cutting of plum blossom is suitable for pruning in early spring and late autumn. Cuttings should choose annual robust branches, take their middle and lower parts and cut them into cuttings 10 to 15 centimeters long. conditionally, they can be dipped in the base of cuttings with 100 mg of naphthalene acetic acid per liter for 30 minutes to promote rooting, and 1 000 times methyl topiramate can be dipped in cuttings to prevent root rot.
Cutting substrate with perlite, cutting in 13-15 cm small plastic basin, each pot 3-5 plants, temporarily placed in the indoor weak light. If it is autumn cutting, the flowerpot should add plastic bags to moisturize and keep warm, and must be shaded.
After the plum blossom cuttage is over, pour water thoroughly to ensure the humidity of the air. Watering should be dry and wet. From the third week, the nutrient solution should be poured once a week, 100ml each time. Cuttings take root and then transplant into small flowerpots. The above is an introduction to how plum blossoms propagate.
How to reproduce plum blossom, the propagation method of plum blossom / sowing / cutting / grafting / striping
Plum blossom, ranking first among the top ten famous flowers in China, is a very ornamental plant, and many people raise this plant at home, so its reproduction method is also a problem that many people are more concerned about. About how to reproduce plum blossoms, what are the breeding methods of plum blossoms? Next, the editor will take you to learn about it.
First, how to reproduce plum blossoms
II. Propagation methods of plum blossoms
1. Sowing and reproduction
In order to sow and reproduce plum blossoms, we must first choose the fruit. The fruit of plum blossom usually ripens around September to October every year, so we can pick it and sow it. Usually, seedlings can grow in the spring of the following year after sowing.
two。 Cuttage propagation
The most suitable time for cutting propagation of plum blossom is around November every year, and it is best to choose a more robust growth when selecting cuttings, so that the survival rate will be greatly improved. When cutting, most of the cuttings have to be cut into the soil, generally leaving 2-3cm or so, the soil can choose humus soil and fine sandy soil to mix, so the displacement is better, the plum blossom can also better absorb nutrients.
3. Grafting propagation
Among the breeding methods of plum blossom, grafting is a commonly used one, and the survival rate is also relatively high. this method is generally carried out in spring and can be divided into two methods: branch grafting and bud grafting. You can try it when you have time.
4. Striping propagation
The striping propagation of plum blossoms is similar to that of grafting, which is best carried out every spring. Plum blossoms that have grown for several years are generally selected to remove its new branches. When pressing the branches into the soil, remember to cut two or three knives below them, which is easier to survive, but remember not to cut too deep.
The above small and medium-sized ribbon you understand the plum blossom breeding methods, in accordance with the above reproduction success, we can carry out normal maintenance, as for the maintenance methods we can refer to the plum blossom culture method. Needless to say, the editor has introduced the question of how to breed plum blossoms here. I hope I can bring some help to you.
How to reproduce Prunus mume blossom? the propagation method / grafting of Prunus mume flower is the easiest to survive.
It is well known that the efficacy and function of the plum blossom is very many, so more and more people grow it, and when the plum blossom blossoms, it often involves the problem of reproduction, as a different plant, how to reproduce better? Today we will take a look at the breeding methods of plum blossoms.
How to reproduce Prunus mume
The propagation methods of plum blossom include grafting, planting, sowing, cutting and striping, of which the most commonly used is grafting, which is more convenient to operate, and other ways are also more commonly used, it can be said that each has its own characteristics, let's take a look at the specific methods.
First, how to graft the wax plum blossom
1. Grafting time
The time is generally chosen from March to April, that is, after the flower fade, when the bud germinates with wheat grain size, the grafting is the easiest to survive and is more conducive to flower branch germination. If the bud is too large, the success rate of grafting will be lower.
2. Methods
One month before grafting, the sturdy and longer annual branches were selected from the strong mother tree, and then the top tip was cut off to concentrate nutrients to the middle part of the branch, which could provide sufficient nutrients for grafting.
Cut the leaf bud into a scion of about 6 cm, and then prepare 5-year-old Chimonanthus seedlings as rootstock, the cut of the rootstock should be slightly longer, join the scion with the rootstock, and then smear it with mud.
Seal the treated grafted plants with soil, and after a month, you can pick up the soil and cultivate the surviving ones. The grafted seedlings should be heart-picked in time after cultivation, which can promote the proliferation and germination of the seedlings.
Note: if you use the grafting in the breeding method of Lamei blossom, you should first cut off the scion under the interface after survival, and then cut off the branches and tips of the rootstock above the cut.
2. Sowing and propagation
1. Sowing time
The time of harvest is from June to July of that year. After picking the fruit, peel out the seeds, then store them in wet sand and store them for reproduction in March of the second year.
2. Specific methods
When using sowing method, how to reproduce the plum blossom? First take out the stored seeds, then clear them in the water together with the sand, wash the wax off, and then spread them evenly on the sand bed. Attention should be paid to fertilization and weeding at the seedling stage, and it can be transplanted after 2 years of cultivation.
3. Ramet propagation
1. Ramet time
Ramet is usually carried out in February-March, if the florescence is delayed, it is necessary to wait for the flower to fade before ramet.
2. Specific methods
When the leaf bud just sends out, can carry on the ramet propagation, how does the wax plum blossom reproduce at this time? First dig out the sturdy mother plant and split the stem with a knife so that each one retains at least three or more stems.
The divided stalks are planted in a fertile basin of prepared soil, then a small amount of water is watered, and when the plants begin to grow normally, they are managed in accordance with the culture method of plum blossoms.
IV. Cutting propagation
The cuttage propagation of Prunus mume is usually carried out in November, rather than other plants in spring, the cold tolerance of Prunus mume is strong, so the cutting in November is still easy to survive. Generally, the summer twig is the best, and the branches with strong growth are selected as cuttings. After soaking 1min with 1 × 10-4 α-naphthylacetic acid, it is easier to root in the shaded plastic shed.
- Prev
Cultivation method of potted plum blossom
Plum blossom potted cultivation method, plum blossom sunshine and good ventilation environment, good fertilizer, afraid of waterlogging, more cold, but the tolerance of toxic gases is very weak. Plum potted technology is more complex, cultivation management should be fine, and watering, fertilization should pay more attention to. Plum watering must be timely, appropriate, master not dry water
- Next
How to plant preserved plum trees
Lamei is a deciduous shrub native to Jiangsu, Zhejiang, Anhui and other places in China. Like slightly acidic soil, has been cultivated in China for a long time, is a winter flower with good color and fragrance, flowering for as long as 3 months, not only can be cultivated in open field, but also can be potted as bonsai. Flowers can extract aromatic oil
Related
- Fuxing push coffee new agricultural production and marketing class: lack of small-scale processing plants
- Jujube rice field leisure farm deep ploughing Yilan for five years to create a space for organic food and play
- Nongyu Farm-A trial of organic papaya for brave women with advanced technology
- Four points for attention in the prevention and control of diseases and insect pests of edible fungi
- How to add nutrient solution to Edible Fungi
- Is there any good way to control edible fungus mites?
- Open Inoculation Technology of Edible Fungi
- Is there any clever way to use fertilizer for edible fungus in winter?
- What agents are used to kill the pathogens of edible fungi in the mushroom shed?
- Rapid drying of Edible Fungi