Planting method of evergreen in Guangdong

Guangdong evergreen planting method, Guangdong evergreen leaves broad and bright, four seasons evergreen, stem straight and straight, leaf marks obvious, node-like bamboo, extremely shade-tolerant and strong growth, as long as inserted into the water, can take root and long leaves, is currently widely cultivated indoor foliage plant.

Guangdong Wannianqing is originally produced in Guangdong, Guangxi, Yunnan and the Philippines. Like warm and moist, shade-resistant, even in the indoor light is very dark is not easy to grow. In fear of the scorching sun, it can safely survive the winter when the temperature is not lower than 0 ℃. If the soil is not strict, the fertile garden soil can grow well. It is easy to survive by means of ramet or cutting. Cuttings can be cut throughout the growing season, especially from June to July. The practice is: select stem 1-3 for 1 section, apply plant ash at the cut, cut it in sand or soil, pay attention to shade and moisturize with water, and take root in about half a month. Water insertion is also easy to take root.

Guangdong evergreen is very shady, suitable for growing in bright scattered light, such as the north side of the building, under the tree is very suitable, the sun can be seen in the morning and autumn, the hot sun should be avoided in summer, and the leaves are easy to turn yellow if the light is strong in the morning. During the growing period, the soil should be kept moist; in summer, water should be sprayed twice a day to increase humidity and cool down and clean foliar dust. From May to October, applying cake fertilizer and water once a month can keep the leaves green and bright. If you raise it with water, you only need to put a small amount of long-acting chemical fertilizer or compound fertilizer in the container to grow well. In winter, it is necessary to reduce watering and make the basin soil slightly dry, which helps to improve the cold resistance, but it is too dry and easy to cause the old leaves in the lower part of the stem to be withered and yellow, so it is necessary to carefully grasp the dryness and humidity of the basin soil so that its humidity is moderate.

The sprouting power of Guangdong evergreen is very strong, and the buds at the top can germinate after pruning. Therefore, for the plants whose stems are too high, not plump enough or poor posture, we should often cut them short to promote axillary bud germination and achieve the purpose of compact and beautiful plant shape. Cut branches, as long as not too young, can be used as cuttings for cutting propagation, the above is the introduction of Guangdong evergreen planting method.

The breeding method of Guangdong evergreen

Generally speaking, plants that can be named for ten thousand years are usually very long-lived. From the name of Guangdong evergreen, we can see that it is not only very long-lived, but also should be a plant that is evergreen all the year round, and grows in warmer areas. What the editor said is not wrong, take a look at the following can be verified.

Breeding methods of Guangdong evergreen

1. Ramet propagation

The appropriate time for ramet propagation is generally carried out when changing pots in spring, digging up the Guangdong evergreen plant from the original basin, and cutting off the rhizome at the base of its stem with a knife, and wait until the incision is dry for a period of time before potting activities, it is necessary to pay attention to not too much watering after the completion of potted plants, so as to prevent stagnant water in the pot from making it difficult for plants to breathe.

2. Cuttage propagation

The suitable time for cutting propagation of Guangdong evergreen is in spring and summer every year.

Select the healthy branches of 10cm on the Guangdong evergreen plant as cuttings, dig a hole in the prepared substrate, insert the cuttings into the prepared matrix holes, pay attention to maintain a relatively high air humidity in the process of cutting, keep the temperature at about 20 degrees Celsius, and Guangdong evergreen will take root about 25 days after cutting.

In addition, Guangdong evergreen can also use the method of water insertion. When using the method of water insertion, it is necessary to select a scion about 20cm long, insert it into a cup filled with clear water, change the water every two days or so, and it will take root after about 20 days. When the root system grows well, it can change the pot to grow.

The efficacy and function of Guangdong evergreen

1. The effect of treating sore throat

Sore throat is very uncomfortable, but Guangdong evergreen can have a way to deal with this. Patients with sore throat can choose the rhizome of Guangdong evergreen and use it after drying, or you can directly use its fresh rhizome. Cut 5 grams of fresh rhizome with a knife, mash it with a tool, mix it with water, gargle with a mixture of medicine, and gargle the disease after gargling for a few times.

2. the effect of treating hematemesis

Guangdong evergreen can be said to be "rich in learning". There are also several brushes for the treatment of hematemesis. You can take one or two roots of Guangdong evergreen, take an appropriate amount of red jujube, mix the two and take them with boiling water, which can effectively relieve the symptoms of hematemesis.

3. The effect of treating rabies.

Guangdong evergreen can also treat rabies patients, take four taels of fresh Guangdong evergreen plus four taels of sugar, mash the juice, and add sugar to the juice after oral administration, which can relieve the treatment of rabies.

4. Landscape value

The leaves of Guangdong evergreen are wide and green, which are very suitable for interior decoration.

5. Other effects

Guangdong evergreen also has a series of medicinal values, such as clearing heat and detoxification, reducing swelling and cooling blood, relieving pain, treating snakebite and so on.

Growth habits of Guangdong evergreen

Guangdong evergreen likes a warm and humid environment and needs sunlight, but it avoids the direct exposure of strong light, even if there is no light, a cool environment can grow. Not hardy, winter growth temperature should not be lower than 12 degrees. The normal growth temperature is about 30 degrees. Growth requires a fertile, loose and well-drained acidic soil.

Can Guangdong Wannianqing put it in the living room?

1. Benefits

Although its juice is poisonous, as long as there is no direct contact with the juice, you can consider putting it in the living room. This is because if we put it in a more warm place, it will change our mood more. In addition, it has a higher ability to purify the air. In addition, we can also use it to produce oxygen. In addition, it can also regulate the temperature and humidity of the air.

2. Prosperous wealth

There is a saying that putting it in the living room will change people's fortune to a certain extent, but generally speaking, the several places we need to put it are the coffee table, the entrance and the gate. It can be placed next to the cup on the coffee table for decoration, which can delight the mood and promote harmony. It is also a good choice to hang it at the door of the living room, which will directly affect luck, because it is equivalent to a facade. In addition, if there is no porch in some homes, we have to change the place where it is placed. In addition, it is also a good choice to put it in the gate, because the first feeling of the gate has a great influence, it can remove the obscenity outside and bring good things in. Of course, we can also put it on the balcony, but it doesn't have much to do with the living room, but the balcony and the living room have the best place to put this thing, and that's where they connect.

Planting Guangdong evergreen can not only put a pot of evergreen and very long-lived plants on its own site, has a very good meaning, is very good for fengshui. At the same time, Guangdong evergreen also has a very good medicinal effect, for many unexpected situations have a very good effect.

How to propagate Guangdong evergreen? the propagation method / cutting survival rate of Guangdong evergreen is high.

Guangdong evergreen, a very easy to feed plant, its broad leaves, evergreen all the year round, often used to decorate the living room, study and other places, has an excellent ornamental. But is a pot of Guangdong evergreen too monotonous? It's time to breed a pot of your own, so how do Guangdong evergreen breed? The following are two common propagation methods of Guangdong evergreen, of which the cuttage survival rate is high, let's go and have a look!

1. How to propagate, cuttage / ramet of Guangdong evergreen

As a common indoor potted plant, the breeding method of Guangdong evergreen can be said to be very simple, but it is not easy to breed Guangdong evergreen yourself. Each kind of plant has its own reproduction method, and there are two common methods to breed Guangdong evergreen: cutting and dividing, in which cutting is divided into soil cutting and water cutting, and we continue to look at the specific operation.

2. Two breeding methods of Guangdong evergreen

(1) cutting method of Guangdong evergreen, soil cutting / water cutting

1. Soil cutting propagation

① time: Guangdong Wannianqing likes a warm environment, so its cutting is generally selected in the Spring and Autumn period, when cutting, the survival rate will be very high.

② cuttings: on healthy Guangdong evergreen, cut off the top of the stem 7 to 10 cm as cuttings. Then remove the rest of the leaves to reduce water evaporation in photosynthesis, pay attention to the incision coated with plant ash disinfection.

③ cuttage: cut the treated cuttings in a sand bed, place them in a semi-shady place with high air humidity, and control the room temperature at 25-30 ℃. It can take root about 15-25 days after planting, wait for new buds to sprout on the stem segment, and then transplant to the flowerpot.

2. Water insertion propagation

① water cutting time: Guangdong evergreen water cuttage propagation, it is best to choose spring and autumn, because early spring and late autumn can not reach the required temperature for rooting, cuttings are vulnerable to microbial infection and rot in summer high temperature season, and frostbite in winter.

② water-inserted seedlings: on the 1-2-year-old Guangdong evergreen, select strong branches with a diameter of about 1cm, and pay attention to preserving the aerial roots on the stem nodes. After the seedlings are selected, disinfect the cut with potassium permanganate, and then put it in a cool place to dry.

③ water insertion begins: insert the water into a prepared transparent glass bottle and add the right amount of water, so that it is about 2 inch 3 of the container. The control room is about 25 ℃, and the air humidity is kept high. It can take root after 20 days.

(2) ramet propagation of Guangdong evergreen.

① ramet time: when it comes to breeding Guangdong evergreen, ramet is the most commonly used. This method, generally in the spring, combined with the change of basin.

② split method: take Guangdong evergreen from the inside of the basin, cut off the rhizome of the stem, and apply plant ash to prevent decay, then put it in a cool and ventilated place, wait for the incision to dry and then pot, water thoroughly, watering should not be too much, about 10 days can restore growth.

Generally speaking, the breeding of Guangdong evergreen, whether cutting or ramet, can survive, but the most suitable for family reproduction is still cutting. Of course, the method is dead, people are alive, we can according to the actual situation, choose the method to breed. With regard to the breeding method of Guangdong evergreen, the editor has introduced this, hoping to give you some help.