[Sao heater] FAQ on using fuel to breed radiator

Answers to frequently asked questions about using fuel to breed radiators

1. What does the fuel farming heater use to generate heat?

It is heated by the combustion of diesel (or kerosene). Under the machine is the fuel tank.

2. Then why use electricity? Does it consume a lot of electricity?

The electricity is for a 220V fan motor, not exceeding 250W

3. How much oil should be burned in an hour for oil-fired breeding heaters? Is the data accurate?

For example, the thermal power 20KW heater generally consumes 2-3.4jin of fuel per hour.

4. Is it very expensive to use it in a day?

As the Sao heater heats up quickly, it is not necessary for the machine to run all the time. When the indoor temperature reaches the set temperature, the machine will stop automatically. The running time after the machine is turned on has a lot to do with the heat preservation and heating area of the room. The larger the area, the longer the heating time. The better the heat preservation, the shorter the heating time, the overall calculation, the cost is not high.

5. How long can it take to add oil to the oil-fired breeding radiator?

Generally speaking, filling up a tank of gas can work continuously for 10 hours. Users generally heat up periodically, and their working hours will be extended accordingly.

6. How much area can a machine manage? What if the area is very large?

A SA-50KW can heat up an area of about 278 square meters. If the room has a large area, multiple hot fans are recommended to ensure uniform heating.

7. How much can the room temperature of the heating air conditioner be increased by using oil?

There is a temperature adjustment button on the equipment, and 5-55 degrees can be adjusted freely. In general, we recommend that the temperature of the thermostat should not be set too high to save fuel costs.

8. Can the temperature of the radiator for fuel farming be controlled automatically?

The heater can automatically control the temperature after it is connected to the thermostat. For example, the thermostat sets the temperature at 25 degrees Celsius, and when the room temperature is heated to the set temperature, the hot air will stop automatically. When the room temperature is at the set temperature, the machine starts heating automatically. Over and over again.

9. Will the fuel farming radiator consume oxygen if it is burned in the room?

Combustion requires oxygen, and oil-fired heaters are no exception. Through calculation and practical use, we believe that oxygen consumption is relatively small and will not affect the normal growth of animals and plants, but we still strongly recommend that you ensure regular ventilation.

10. Where is the exhaust gas after combustion?

In a direct-fired heater, the combustion tail gas is emitted along with the hot gas. The combustion tail gas is emitted outdoors through the chimney.

11. Will the tail gas be harmful to pigs or chickens?

We have adopted the advanced European combustion technology, which can ensure the full combustion of the fuel, and the harmful gas content in the tail gas has been reduced to a very low level and will not cause harm. But we still recommend regular ventilation.

12. How is this machine ignited? Is the operation very complicated?

Ignition is electronic automatic ignition, the machine only has a button at the beginning, press the switch to start the machine automatically, press the beginning of the machine to stop immediately, the operation is very simple. After connecting the thermostat, all the operations are automatic. After you set the temperature for the first time, the switch on and off is automatic, filling up at one time, and no one needs to take care of it.

Is it safe to use this machine?

The machine has a variety of safety protection devices, such as: overheat protection, flameout protection, overcurrent protection and so on. At the same time, diesel itself is not flammable, the working voltage and current of the machine are not large, there is no danger, please rest assured to use.

Is the machine easy to break down?

In terms of equipment principle, the machine is not very demanding on environment and fuel, so it is more durable. Normal maintenance, can be used for about 5 years.

"

The above is to share with you about the use of oil-fired heaters related questions, if you still do not understand, welcome to communicate.