Restoration and management of dead bed in culture and fermentation bed

Fermentation bed culture sometimes we will encounter due to the fermentation bed moisture is too large, the cushion is too tight and too fine, coupled with the continuous accumulation of feces and urine for a period of time without raking, etc., and so on caused by the dead bed (odor, odor, hardening, no fever, no decomposition, no fermentation); at this time, check that if the cushion is still not saturated, most of it is still refreshing, just because of the above reasons, it can be saved.

​ rescue method: ① uses Lvlong deodorant disinfectant to dilute 50 times, spraying 20000ml per cubic meter (according to the serious situation to decide the dosage), the purpose is to neutralize alkalinity, neutralize and fix ammonia. When necessary, for example, if the fermentation bed has a long service life, if the carbon source in the cushion is insufficient (especially those dominated by sawdust from grain husks, and the padding system that feels the temperature is not up), carbon energy must be replenished. for example, 100 grams of glucose per cubic meter, or 200 grams per cubic meter of corn meal; glucose or corn meal can be mixed into microbial deodorizing disinfection solution and stirred together. ② properly replenishes fresh dry padding on the surface in order to neutralize moisture; the specific amount of dry padding depends on the situation, and if it is too wet, it will be filled a little more, but if it is wet, it will more or less be added. ③ supplementary bacteria, each cubic meter of more than 20 grams of dry sprinkling fermentation bed bacteria, according to the proportion of 1:10 mixed with half corn flour, and then evenly added to the cushion. The operation sequence of ④ is as follows: first, manually spray Lulong deodorant disinfectant solution, then sprinkle with supplementary carbon energy such as glucose or corn meal (glucose and corn meal can also be mixed into the deodorant disinfectant solution and sprinkle), then sprinkle the supplementary dry cushion on the surface, and then sprinkle the Lvlong dry spread fermentation bed bacteria (the bacteria can be mixed into the supplementary dry cushion and sprinkle together). Start the rake turning machine to turn the rake cushion. The whole fermentation mattress material was raked twice in a row, and the recovery situation was observed, which can generally be restored.

​ Green long biological since its inception, has served thousands of fermentation bed users, the following is our service to users in the process of summing up the maintenance tips of dry fermentation bed: afraid of rain, not afraid of wind (the house should be ventilated, but can not be caught in the rain into the water); afraid of humidity, try to keep dry); fear of reality (cushion to be loose and breathable, can not be consolidated); ammonia and water vapor, to be discharged in time. If you still have problems with the fermentation bed, you can contact us in time and we will give you the most professional and reasonable solution as soon as possible.