Tips for breeding succulent jade dew make you become a succulent person.

Nowadays, many people like succulent plants, which are good-looking and easy to raise, but the requirements for the environment are very high. Let's learn about the tips of succulent jade dew breeding, so that you can become succulent people.

First, the embodiment of the replacement of Yulu in the four seasons

The temperature suitable for the growth of Yulu is 15-25 degrees and the humidity is controlled between 70-90. Take the Yangtze River Delta as an example.

The temperature in spring and autumn is the most suitable. Yulu grows rapidly. Usually the juice in the body doesn't have time to fill, like a balloon that doesn't have enough air, and the glossiness of the surface such as white powder is slightly lower.

When the summer temperature increased, Yulu stopped growing and went into dormancy, and the surface whitening transparency decreased.

Winter indoor temperature should be able to maintain above 5 degrees, slow growth appears semi-dormant, the body juice filling, like a balloon with enough air, the window has the highest glossiness and the best transparency.

Second, the watering of Yulu in different seasons

The temperature is suitable in spring and autumn. if it is observed that the jade dew begins to grow vigorously, it shows that the root system is strong now. After the basin soil is dry, the basin soil can be watered thoroughly and blown in the ventilated place for a few days to remove the remaining water from the basin soil and raise it again.

The summer temperature is higher, the jade dew stops growing, the window surface permeability decreases, now the root hair dryness does not have the water absorption ability should stop watering, can spray humidify in the dusk to alleviate the leaf surface wrinkle.

If the temperature is above 10 degrees in winter, Yulu will grow slowly and keep the basin soil slightly damp. This is the most suitable for stuffy, improve the transparency of the window, increase appreciation. When the lowest temperature drops to 5 degrees, the window surface of Yulu turns white after frostbite, affecting the viewing.

Third, create a suitable small environment

The suitable environmental humidity of Yulu mentioned above is between 70 and 90, so it is obvious that it is necessary to create a stuffy environment.

Specific measures are: put plastic cups on flowerpots; cover plastic films or glass plates with finishing boxes; build a small cupboard or shed with glass or sunboard; separate security windows with stainless steel, press glass above to prevent rain, and cover the outside three sides with sun plates or thick transparent plastic cloth, and so on. It should be noted that the smaller the space, the more likely the temperature and humidity in the environment to change suddenly, which is disadvantageous to plants.

The temperature of 12:00-15:00 in spring and autumn can rise very high, up to 40-50 degrees, so it is humidified in the evening due to turning on ventilation before going to work during the day. Keep in mind that the stuffy cultivation during this period must be ventilated during the day and stuffy at night. If many friends turn it upside down, there will be something wrong with the plants.

Summer high temperature and humidity is fatal to Yulu, this period must be mainly ventilation and cooling, remember not to sulk, can be in the sunny evening around the plant spray humidification.

Winter is the most suitable for stuffy breeding.

1. It can keep warm.

two。 It can improve the transparency of the window and increase the appreciation. Foam incubators are needed to cope with colder climates in the north.

Fourth, planting, allocating soil and putting up the basin

First, put the larger particles of blue stone on the basin bottom pad, put the jade dew to stretch the root system, and hold the jade along the four walls with one hand and pour into the red jade granular soil mixed with a small amount of peat, vermiculite, and red jade. Some people will think that red jade will be powdered for a long time. I use the hard red jade soil of an ordinary university, and the hardness can be used, and the soil is spread to 2/3 of the basin. Here, the soil covering the root system had better keep it moist, which is conducive to the growth of the root system. The next step is the pure granular soil pavement, which is paved to 0.5 cm on the edge of the basin to complete the pavement. After putting on the basin, spray the water with a spray can, and the soil surface can be slightly moist.

The above is the introduction of this article, I believe you have a simple understanding after reading it, if necessary, you can continue to pay attention to the No. 1 home network for more information.