Culture method of potted rose how to raise rose

Rose is known as the queen of flowers and is one of the top ten famous flowers in China. Rose flowers are beautiful and varied. They often bloom at 04:00. They are deeply loved by people and are of high ornamental value. Follow the official Wechat public "wx17house" and go into the decoration network with the editor to see how to raise rose flowers.

Culture method of potted rose how to raise rose

First, how to raise rose flowers

Although the rose is not strict with the soil, the loam which is loose, fertile, rich in organic matter and slightly acidic is more suitable. Sex likes a warm, sunny, well-ventilated and well-drained environment. The optimum temperature of most varieties is 15 ~ 26 degrees in daytime and 10 ~ 15 degrees in the evening. When the temperature is below 5 degrees in winter, it goes into dormancy. Some varieties can withstand the low temperature of minus 15 degrees and the high temperature of 35 degrees, but when the summer temperature lasts above 30 degrees, it enters semi-dormancy, the plant growth is poor, although it can also conceive buds, but the flower petals are few, the color is dim and dull, and it loses its ornamental value.

Rose likes water, fertilizer, can not lose water throughout the life cycle, especially from budding to leaf release, flowering stage, should be fully water supply, flowering water needs a lot, the soil should always keep moist, such flowers hypertrophy, bright. After entering the dormant period, it is necessary not to control too much water. As the rose continues to sprout, shoot, bud and blossom during the growing period, timely and regular fertilization must be applied to prevent the decline of the tree potential and make the flowers bloom continuously.

Second, the culture method of Chinese rose

1. Temperature: rose flowers like warmth, fear of heat, and are more resistant to cold. The most suitable temperature for the growth of Chinese rose is 22-25 ℃. The high temperature in summer is extremely disadvantageous to the flowering of Chinese rose. If the high temperature lasts for more than 30 ℃, the flowering will decrease, and the quality of Chinese rose will decrease and enter the semi-dormant state. Rose flowers like sunny, well-ventilated, well-drained and sheltered environment.

2. Moisture: rose flowers like a humid environment, and the air relative humidity is best controlled between 75% and 80%. Rose flowers can also withstand a certain degree of drought. It is best to spray water once in the morning and evening in summer to maintain a humid environment and promote the growth of flowers and leaves. Sun-dried water should be used for watering to reduce the temperature difference between basin soil and water.

3. Soil: the soil planted with rose had better contain organic, fertile, loose, slightly acidic and good drainage, while consolidated soil and calcareous soil are not conducive to the growth of rose. In fact, the rose flower has a relatively wide range of adaptation to the soil.

4. Pruning: the first post-anthesis pruning is carried out in the middle and late May, and the residual flowers should be cut off in time to avoid fruiting, so as to concentrate nutrition and germinate new branches, so that the secondary flowers can bloom large, beautiful and strong branches, and can be cut lightly in order to properly restrain its growth. just keep 4-5 buds. When pruning, it should be noted that the cut should be 0.5 cm above the bud, too high will not only affect the appearance, but also delay the germination of branches.

5. Reproduction: when I go to school, I often like to plant Chinese rose by cutting, which has strong vitality. It will directly pick the branches of Chinese rose and insert it into the soil, and it will grow smoothly after a week. Here we introduce a more scientific method for you, ha: cut the cut branches into 10-15 cm branches, insert the cuttings into a nutrition bowl, or a small flowerpot, put them in a place with weak light, maintain a temperature of about 20 degrees, and wait for rooting and leaf buds to grow branches. You can change the pot and transplant.

6. Prevention and control of diseases and insect pests: the flowerpot placement site should often be sterilized with 15% raw lime water or carbendazim or potassium permanganate solution. The high temperature in the rainy season from July to August is the high incidence period of leaf spot and powdery mildew. Baume 0.3: 0.5 degree stone-sulfur mixture can be sprayed once a week for a total of 2 times. The larvae of longicorn beetles were found to be harmful from June to July, and the branches should be cut off immediately. Once other leaf-eating pests are found, they should be sprayed with 800 times monocrotophos, which can kill eggs and larvae.

Culture method of potted rose how to raise rose

Rose is known as the queen of flowers and is one of the top ten famous flowers in China. Rose flowers are beautiful and varied. They often bloom at 04:00. They are deeply loved by people and are of high ornamental value. Then how to raise rose flowers? Then Xiaoqi shared the culture method of potted rose.

Red rose picture

First, how to raise rose flowers

Although the rose is not strict with the soil, the loam which is loose, fertile, rich in organic matter and slightly acidic is more suitable. Sex likes a warm, sunny, well-ventilated and well-drained environment. The optimum temperature of most varieties is 15 ~ 26 degrees in daytime and 10 ~ 15 degrees in the evening. When the temperature is below 5 degrees in winter, it goes into dormancy. Some varieties can withstand the low temperature of minus 15 degrees and the high temperature of 35 degrees, but when the summer temperature lasts above 30 degrees, it enters semi-dormancy, the plant growth is poor, although it can also conceive buds, but the flower petals are few, the color is dim and dull, and it loses its ornamental value.

Rose likes water, fertilizer, can not lose water throughout the life cycle, especially from budding to leaf release, flowering stage, should be fully water supply, flowering water needs a lot, the soil should always keep moist, such flowers hypertrophy, bright. After entering the dormant period, it is necessary not to control too much water. As the rose continues to sprout, shoot, bud and blossom during the growing period, timely and regular fertilization must be applied to prevent the decline of the tree potential and make the flowers bloom continuously.

Pictures of pink rose

Second, the culture method of Chinese rose

1. Temperature: rose flowers like warmth, fear of heat, and are more resistant to cold. The most suitable temperature for the growth of Chinese rose is 22-25 ℃. The high temperature in summer is extremely disadvantageous to the flowering of Chinese rose. If the high temperature lasts for more than 30 ℃, the flowering will decrease, and the quality of Chinese rose will decrease and enter the semi-dormant state. Rose flowers like sunny, well-ventilated, well-drained and sheltered environment.

2. Moisture: rose flowers like a humid environment, and the air relative humidity is best controlled between 75% and 80%. Rose flowers can also withstand a certain degree of drought. It is best to spray water once in the morning and evening in summer to maintain a humid environment and promote the growth of flowers and leaves. Sun-dried water should be used for watering to reduce the temperature difference between basin soil and water.

3. Soil: the soil planted with rose had better contain organic, fertile, loose, slightly acidic and good drainage, while consolidated soil and calcareous soil are not conducive to the growth of rose. In fact, the rose flower has a relatively wide range of adaptation to the soil.

4. Pruning: the first post-anthesis pruning is carried out in the middle and late May, and the residual flowers should be cut off in time to avoid fruiting, so as to concentrate nutrition and germinate new branches, so that the secondary flowers can bloom large, beautiful and strong branches, and can be cut lightly in order to properly restrain its growth. just keep 4-5 buds. When pruning, it should be noted that the cut should be 0.5 cm above the bud, too high will not only affect the appearance, but also delay the germination of branches.

5. Reproduction: when I go to school, I often like to plant Chinese rose by cutting, which has strong vitality. It will directly pick the branches of Chinese rose and insert it into the soil, and it will grow smoothly after a week. Here we introduce a more scientific method for you, ha: cut the cut branches into 10-15 cm branches, insert the cuttings into a nutrition bowl, or a small flowerpot, put them in a place with weak light, maintain a temperature of about 20 degrees, and wait for rooting and leaf buds to grow branches. You can change the pot and transplant.

6. Prevention and control of diseases and insect pests: the flowerpot placement site should often be sterilized with 15% raw lime water or carbendazim or potassium permanganate solution. The high temperature in the rainy season from July to August is the high incidence period of leaf spot and powdery mildew. Baume 0.3: 0.5 degree stone-sulfur mixture can be sprayed once a week for a total of 2 times. The larvae of longicorn beetles were found to be harmful from June to July, and the branches should be cut off immediately. Once other leaf-eating pests are found, they should be sprayed with 800 times monocrotophos, which can kill eggs and larvae.

Pink rose

The above is how to raise Chinese rose and the breeding method of Chinese rose, the adaptability of Chinese rose is still very strong, the breeding process is mainly to prevent diseases and insect pests, we might as well start breeding a few pots.

Pictures of potted rose flowers and culture methods of potted rose flowers

Rose in landscaping, has an indispensable value, rose in the north and south gardens, the use of the largest number of flowers. Rose is the main ornamental flower in spring, which is loved by local gardens because of its long flowering period, high ornamental value and low price. Today we will learn about the culture method of potted rose. . The cultivation method of potted rose should first select the appropriate flowerpot. The size of the potted rose should be commensurate with the plant size, and the flowerpot should not be too small. When the plant grows until the rhizome is filled with the flowerpot, the flowerpot should be replaced in time to meet the needs of the continued development of the rhizome. Choose a healthy and full bud point, pick it from the plant or cut it with a sharp knife, the bud point can grow a pair of leaves, take the bud time can choose early morning or evening to avoid dehydration. Potted rose buries the bud point into the cutting medium, and the cutting depth is 1x3 of the whole bud point, which is convenient for ventilation to prevent decay (the same truth of branch cutting is 1-3cm). The speed of shallow long root is faster than that of deep long root, the principle is very simple, the temperature of topsoil is relatively higher than that of inner layer, which is favorable for rooting), take sprayer to wet the entrance of bud point and the medium, which is good for adhesion. . Potted rose culture methods potted plants should maintain sufficient sunshine and ventilation. Rose flowers like the sun, but need to avoid too strong direct sunlight, when the summer noon sun is too strong, need to give some shelter. If the rose is put indoors, to open the doors and windows, maintain ventilation, if poor ventilation is easy to cause powdery mildew. Potted rose should prune the branches and leaves in time, and after the flowers fade, the upper part of the branches connected to the residual flowers should be subtracted in time to promote early new branches and blossom again. If it is found that there are branches with particularly strong growth, they should be cut short properly to avoid consuming too much nutrients and affecting the growth of other branches. When the growth is too dense in summer, it should also be pruned properly. . The maintenance and management of potted rose should apply more fertilizer during the flowering period, because the number of flowering times of rose is more, and the need for fertilizer is more, so in the flowering period from May to October, fertilizer should be applied every ten days, less fertilization should be applied in winter, or even stop fertilization. More watering during the growing period, plants consume more water during the growing period, coupled with hot summer weather, water evaporation is faster, so it is necessary to water once every morning and evening to keep sufficient water, and if you encounter rainy days, you can reduce watering appropriately. But potted rose should be paid special attention not to accumulate water. Potted rose should prevent diseases and insect pests in time, the main diseases and insect pests of rose are black spot, powdery mildew, leaf blight, beetle, diamondback moth and so on. Fungicides can be sprayed regularly in high temperature, high humidity, overcast and rainy seasons, and appropriate spraying drugs can be sprayed according to the situation in winter dormant period. . The editor concludes that China is one of the places of origin of rose. Rose Rong is beautiful and varied. It often blooms at 04:00 and is very popular. 52 cities in China chose it as the city flower, and the rose in May 1985 was named the fifth of the top ten famous flowers in China. Today, the editor's introduction to the culture method of potted rose is over. Thank you for your appreciation.