The Culture methods and precautions of Milan Flower what to do if the leaves are lost

Milan is now a potted plant that many people like in home life, the leaves are good-looking, very green, and the flowers are a little fragrant. What are the points for attention in the process of breeding Milan flowers? What if there is a loss of leaves in the process of breeding? Let's take a look at the Women's Network:

The culture method of Milan flower:

1. Fertilization skills should be applied once a month, mainly organic fertilizer and high-efficiency phosphorus and potassium fertilizer, and avoid partial application of nitrogen fertilizer. Each time, 25 grams of peanut cake fertilizer or rapeseed cake fertilizer or tea seed cake fertilizer, 15 grams of potassium dihydrogen phosphate or high efficiency biological phosphorus and potassium fertilizer were applied in each pot, and 2 kilograms of rotten and deodorized human and animal manure water was added to each pot.

2. Watering techniques should keep the basin soil moist all the year round, do not crack in drought, but do not get too wet for a long time, otherwise it will retting roots, rotten roots and yellow leaves. In general, fresh water is watered once a day in summer and autumn, and every 2-3 days in winter and spring, so that water can quickly infiltrate into the basin soil and not accumulate on the basin soil. At the same time, it is necessary to often spray water on the branches and leaves, especially in the periods of high temperature in summer and drought in winter, to spray all the branches and leaves evenly, so that it is appropriate to start dripping water to keep the branches and leaves moist.

3. Spraying skills potted Milan is seriously damaged by diseases and pests such as powdery mildew, leaf spot, anthrax, red spider, shell insects, aphids, rust wall lice, etc., which yellowed and withered branches and leaves. 25: 30 times dry and pure plant ash and calcium superphosphate clarification solution can be sprayed on the leaves every 15-20 days, or 0.1% lime water clarification solution for pollution-free control, in order to protect branches and leaves and prevent all kinds of diseases and pests. The maintenance of overwintering Milan is a favorite flower, but it is naturally heat-resistant and cold-resistant.

Notes for Milan flowers:

1. After Milan has just been watered once, it should be watered less in half a month to promote new roots.

two。 Potted Milan, usually need to turn the pot to change the soil once every two years, do not break the soil, remove part of the old soil in the rootless place, cut off the rotten roots. When adding new soil, appropriately add some phosphate fertilizer as base fertilizer, not too much. After putting on the basin, keep it in a cool place and move it to the sunny place after about a week. It is more appropriate to change the soil about a week after leaving the house in spring. 3. Milan is afraid of the cold and it is more difficult to survive the winter. When the temperature is below 12 ℃, the dormancy period should be stopped and watering should be reduced.

4. In the coming spring, you can't leave the house until the temperature is stable, so as not to freeze the plants to death in spring.

5. Just bought Milan may be due to its growth environment is different from the indoor environment, such as temperature, light and so on, so it is easy to lose leaves and wither.

Milan florescence in May-September, or blooming all the year round, flowers fragrance, is a better home decoration plants.

What if Milan loses its leaves?

There are two main reasons for the loss of leaves in Milan. One is that too much water will cause Milan's roots to be unable to breathe and water can not be transmitted to the leaves, resulting in asphyxiation and rotting roots. Milan water more performance in the beginning of the lower leaves curled, dry, brown fall, resulting in the upper green leaves also fell in a short period of time.

Second, the lack of water and the lack of water for a long time will lead to the death of Milan's roots. If Milan is watered thoroughly at this time, a large number of leaves will fall in a short period of time, resulting in plant death. Of course, there are many reasons, such as improper fertilization, poor ventilation, frozen leaves and so on.

The breeding method of Milan flower and the treatment method of losing leaves are introduced here, in the process of breeding, you only need to pay attention to it.

What to do with the leaves of Milan flowers? culture methods and points for attention of Milan flowers

Milan is a beautiful flower with a beautiful name. It is an evergreen shrub or small tree. The flower says, "if there is love, life will blossom." as long as we take good care of it, it will grow. But the Milan flower is a little delicate, it will lose its leaves if it is not careful. Next, the editor will briefly introduce how to lose the leaves of Milan, as well as the breeding methods and matters needing attention of Milan flowers, in order to make a reference for everyone to cultivate Milan flowers.

What if Milan loses its leaves?

There are many reasons for Milan to lose their leaves, and it is necessary to find out the causes in order to prescribe the right medicine. Here are several reasons why Milan lost their leaves and how to deal with them.

1. Improper watering, too much or too little

Too much watering, the roots of Milan will fester, leaves will also be affected, leaves will wither; too little watering, lack of water, there will be yellow leaves, leaves will fall off.

Treatment method: adhere to the principle of "dry and wet", which is usually watered once every 2 days and must be watered thoroughly. It is watered once a day in summer and autumn, and every 2-3 days in winter and spring.

2. Improper fertilization, too much or too little

Too much fertilizer will hurt the roots, and the leaves of Milan will fall after being affected; if the fertilizer is insufficient, the leaves will turn yellow and fall off without enough nutrients.

Treatment: adhere to the principle of frequent application of thin fertilizer, apply fertilizer once a month, you can also add an appropriate amount of calcium superphosphate in the fertilizer, so that the rice orchid will grow better.

3. Lack of light

Milan flowers like warm, humid and sunny environment, if placed in a dark environment to grow, lack of light, will affect the growth, leaves will yellowing and falling off.

Treatment: the Milan flower is cultured under bright scattered light.

4. Influence of diseases and insect pests

Affected by leaf spot disease, shell insects, red spiders and other diseases and insect pests, the leaves of Milan flowers will wither and yellow.

Treatment methods: regular spraying of pesticides, every 15 to 20 days for pest control.

II. Culture methods and matters needing attention of Milan flower

1. Temperature

Rice flower prefers warm and humid environment, the suitable temperature for growth is 20 ℃ ~ 25 ℃, and its cold tolerance is weak, so it should be moved to a temperature of no less than 10 ℃ when overwintering in winter.

2. Lighting

Milan flowers like sunny environments, especially bright astigmatism. When the sun is strong in summer, it needs to be shaded properly or moved indoors to avoid direct sunlight. In winter, it should be exposed to more sunlight to ensure 12 hours of sunshine every day.

3. Watering

Milan flowers like a humid environment, generally watering once every two days, watering should adhere to the principle of "no dry, no watering" and "dry and wet". In summer, when the water evaporates quickly, it is necessary to spray water to the leaves frequently.

4. Soil

Milan flowers grow best in loose and fertile slightly acidic soil, so when breeding, we should often loosen the soil, keep the soil loose and smooth drainage, and properly apply fertilizer to maintain the acidity of the soil and the normal growth of Milan flowers.

5. prevention and control of diseases and insect pests

Magnolia will have leaf spot disease, soot disease and affected by shell insects, red spiders, aphids and other diseases and insect pests, growth will be hindered, need regular pest control. Plant ash can be mixed with calcium superphosphate to produce a clarification solution, which can be sprayed on its leaves every 15 to 20 days, or to buy a special pesticide on the market to spray.

Milan flower not only has ornamental value, but also has edible value and medicinal value. It has many uses and is worth breeding. However, if you don't take care of them properly, they will lose their leaves. When you breed them, you must make sure that the temperature is not lower than 10 ℃, that you can't let the sun shine directly in summer, and that the soil is moist and fertile, and that diseases and insect pests are controlled regularly.

How to raise potted Milan flowers, the breeding methods and precautions / light should be sufficient.

Milan flower is a kind of highly ornamental flower, which can be seen in many gardens in our country. Raising Milan flower at home can also beautify the indoor environment, so how to raise potted Milan flower? What are the breeding methods and matters needing attention of Milan flower? Next, the editor will take you to learn about it.

1. How to grow potted Milan flowers / get enough light

If we want to know how to grow potted Milan, we first need to know its growth habits. Milan is a light-loving plant, so we need to keep enough light in the process of culture, but there are many other places that need to pay attention to. Details are introduced in the following Milan culture methods and precautions, we continue to look at.

II. Culture methods and matters needing attention of Milan flower

1. Soil requirement

In the cultivation of Milan flowers, the first step is to choose soil, just like building a house to build a foundation, the choice of soil is a very important part, in terms of soil, we can choose relatively loose sandy soil. this kind of soil has better drainage and can be more favorable for Milan flowers to absorb nutrients.

two。 Fertilization requirements

Among the cultivation methods and matters needing attention of Milan flowers, fertilizer is a very important nutrient and indispensable, because if you want plants to grow luxuriantly, it is far from enough to rely on soil nutrients alone. in terms of fertilizer, we can choose cake fertilizer, regardless of the fact that we should pay attention to diluting it with water before fertilization, so that Milan flowers can be better absorbed.

3. Temperature control

This kind of plant likes warm environment and has little resistance to cold weather, so the temperature must not be too low when breeding. It is best to control the temperature between 18-25 °C, which will be more beneficial to its growth.

4. Watering requirement

Watering is an indispensable link in the cultivation of flowers, and Milan is no exception, but the amount of watering is more fastidious. Milan flowers like a warm and humid environment, so it is necessary to keep the soil moist when breeding, usually watering every 2-3 days, but remember not to accumulate water, otherwise it will easily lead to rotting roots.

5. Lighting requirement

In the Milan flower culture methods and matters needing attention, light is essential, only to maintain adequate care, Milan flowers can thrive. However, shading is needed when the summer sunshine is too strong, otherwise it is easy to burn Milan flowers and cause their leaves to turn yellow, which we must pay attention to.

6. Pest control

In the process of breeding Milan flowers, if the method is wrong, it is easy to produce all kinds of diseases and insect pests. When this kind of situation occurs, we need to find the cause in time and deal with it pertinently. For specific methods, you can refer to the article on the prevention and control of diseases and insect pests of Milan flower, in which there are detailed symptoms and control methods of all kinds of diseases and insect pests. Here the editor will not introduce too much.