Culture methods and matters needing attention of dragon spitting beads picture of dragon spitting beads

Why is this plant named Dragon Spitting Pearl? Because when this flower blooms, when the petals open, there is still a flower to bloom, it is very beautiful, what is the breeding method of dragon spit beads? What are the precautions? What is the picture of dragon spit bead blossom?

Dragon spit bead breeding methods and precautions:

Dragon spit bead profile:

Dragon spit beads belong to vines, the highest can grow to more than 5 meters, can climb the wall growth, can also be used as potted maintenance, its leaves are relatively large, often oval! The white flowers were exceptionally delicate!

Growing environment:

Dragon Tuzhu likes warm, humid and sunny semi-shade environment, not cold. Overwintering temperature should be above 15℃, long-term lower than 10℃, can cause defoliation to death.

Generally, it is propagated by cuttage method, cutting several healthy branches, cuttage slightly moist pot soil can be! Sowing propagation is more difficult, seed life is short, that is, sowing after harvest.

The optimum temperature for growth of P. formosana is 18~24℃, winter temperature is not lower than 8℃, stem and leaf are easy to suffer freezing injury above 5℃, light cause defoliation, heavy cause tender stem to wither.

It is still relatively high temperature resistant, above 30℃ high temperature, as long as sufficient water supply, can still grow normally. However, if you want it to bloom, you can't have too high temperature. This is a bit like hydrangea. The temperature during flowering should be lower, about 17℃.

1. Selection of basin soil

Longtuzhu soil is fertile, loose and slightly acidic sandy loam with good drainage.

Cultivation soil or a mixture of peat soil and coarse sand for potted plants. Potted dragon spit beads commonly used 12~15 cm pots, each pot can be planted 3 plants.

2. Watering and fertilizing

The growth period needs sufficient water, such as soil moisture is too large, will cause the leaves to turn yellow and fall off, if the branches do not wither, stop watering, let it recover, sprout new leaves.

Fertilize once every half month, add phosphorus and potassium fertilizer for 1~2 times in flowering season of dragon tuzhu, or use "huiyou"20-8-20 high nitrate potassium fertilizer for four seasons. In winter, water is reduced and fertilization stopped.

3. Properly topping

To shape the beautiful plant type of Longtuzhu, when the cuttings or seedlings grow to 15 cm after potting, the branches are cut at 10 cm from the mouth of the pot to promote the germination of strong new branches.

Growth period should strictly control the height of branches, pay attention to topping, in order to branch neat, dense flowering in the future.

Half a month after topping, apply bijiu or chlormequat to control plant height to achieve short plants, luxuriant leaves and more flowers.

4. Shaping and pruning

When changing pots in spring every year, the branches on the ground are pruned short to make the plants round, with many branches and flowers.

The climbing evergreen shrub of Arundinaria sinensis must be pruned in order to keep its beautiful shape. Generally in early spring April when changing pots, in the plant from the mouth of the pot 10-15 cm high cut, remove the upper part, promote germination of stout new branches.

5, picking

During growth and development, attention should be paid to picking the core, controlling the height of branches, and making branches neat. After each flower withers, must promptly cut off the flower stem, causes the plant shape low and plump.

6. Light

Do not expose to the sun on the line, exposure leaves will turn yellow, in addition to the summer heat when appropriate shade, other time to maintain full sunshine on the line!

Photos of Dragon Spitting Pearls:

Dragon spit pearl breeding methods and precautions Dragon spit pearl flower pictures

Dragon spit pearl flower shape strange, blooming luxuriant, dragon spit pearl flower can do flower rack, also have to make potted decoration windowsill and summer small courtyard, the whole grass can be used as medicine. How does the dragon spit bead breed? Let's take a look at the breeding methods and precautions of Dragon Spitting Pearls and the pictures of Dragon Spitting Pearls.

1. Cultivation methods and precautions of dragon spit beads

1, planting: potted dragon spit beads, generally every 1~2 years to change the pot once, change the pot time in early spring or after the flowers can be. When changing pots, first pad the drain holes with broken tiles, then put in a small amount of bone powder as base fertilizer, and then put in new culture soil (4 parts of humus soil, 4 parts of garden soil, 2 parts of sand soil), plant good plants, leaving 2~3 cm along the mouth for fertilization and watering. After changing pots, pour water thoroughly, put them in the shade to slow down the seedlings, and move them to a sunny place for maintenance.

2. Watering: Dragon spit beads are more sensitive to moisture. The growth period of stems and leaves should keep the saline soil moist, but the watering should not be excessive. The water amount is too large, resulting in only long vines and no flowering, even yellow leaves, falling, root rot and death. Summer high temperature season should be fully watered, appropriate shade. In winter, water should be reduced to make it dormant in order to survive safely.

3, light: Dragon spit beads need sufficient light in winter, summer weather is too hot to shade, otherwise the leaves yellow. When the light is insufficient, it will cause tendrils to grow and not bloom. Flower bud differentiation was not affected by photoperiod, but strong light promoted flower bud differentiation and development. In the dark should not be placed for too long, in the temperature above 21℃, more than 24 hours, will fall flowers.

4, soil: soil with fertile, loose and good drainage sandy loam.

5, fertilization: fertilization should not be too much, flowering season every 7 to 10 days to apply a decomposed thin cake fertilizer water, continuous application of 3 to 4 fertilizer can be. If yellow phenomenon is found in the cultivation process of Longtuzhu, it can be combined with topdressing and 0.2% ferrous sulfate water, which can make the leaves gradually turn from yellow to green.

II. Dragon Spitting Pearl Flower Picture

Photo Gallery

Photo Gallery

Photo Gallery

Photo Gallery

The above is the breeding method and precautions of dragon spit beads and the picture sharing of dragon spit beads. Dragon spit beads, delicate and lovely at the same time, but not delicate, have the tenacious vitality to resist the scorching heat. You may wish to try breeding.

The cultivation method and precautions of dragon spit bead

propagation method

cutting propagation

Cuttings-generally in May to June each year, optional healthy disease-free branches of the top shoots, but also the lower part of the old branches cut into 8~10 cm stem segments as cuttings. Bud grafting is to take the lateral buds on the branches, with-part of the quality of the part, as cuttings. Root cuttings are root-like stolons cut into 8 - 10 cm long cuttings. Cuttings can be peat, pearlite, moldy soil, river sand and vermiculite matrix, spring and autumn cutting best, cutting temperature of 21 degrees Celsius, cutting bed temperature of 26 degrees Celsius, rooting + points favorable. Rooting can take place 3 weeks after insertion. If the cutting base was treated with 0.5%~0.8% IBA solution for 1~2 seconds, the rooting speed was fast and more.

seed reproduction

Sowing can be carried out in shallow pots in March to April of each year, the temperature is maintained at 24°C, seedlings can emerge in 10 days, seedlings can be transplanted in pots when they are + cm high, and flowers can be produced in the second year. Seeding method is not easy to survive, it is recommended to use cuttage propagation.

planting management

Potted dragon tuzhu commonly used 12 - 15 cm pots, each pot can be planted 3 plants. The growth period needs sufficient water, such as soil moisture is too large, will cause the leaves to turn yellow and fall off, if the branches do not wither, stop watering, let it recover, sprout new leaves.

Fertilize once every half month, add phosphorus and potassium fertilizer for 1~2 times in flowering season of dragon tuzhu, or use "huiyou"20-8-20 high nitrate potassium fertilizer for four seasons. In winter, water is reduced and fertilization stopped.

To mold the beautiful plant type of dragon tuzhu, cut off the branches 10 cm away from the pot when the cuttings or seedlings grow to 15 cm after potting, so as to promote the germination of strong new branches. Growth period should strictly control the height of branches, pay attention to topping, in order to branch neat, dense flowering in the future. Half a month after topping, apply bijiu or chlormequat to control plant height to achieve short plants, luxuriant leaves and more flowers.

When changing pots in spring every year, the branches on the ground are pruned short to make the plants round, with many branches and flowers.

planting

Potted dragon spit bead, -change basin every 1~2 years-times, change basin time in early spring or after flowers fade can be. When changing pots, first pad the drain holes with broken tiles, then put in a small amount of bone powder as base fertilizer, and then put in new culture soil (4 parts of humus soil, 4 parts of garden soil, 2 parts of sandy soil), plant good plants, leaving 2~3 cm along the edge, so as to fertilize and water. After changing pots, pour water thoroughly, put them in the shade to slow down the seedlings, and move them to a sunny place for maintenance. watering