MySheen

Planting methods, cutting methods and flower words of Cymbidium sinensis

Published: 2024-12-23 Author: mysheen
Last Updated: 2024/12/23, The leaf of the whole plant is a heart, so it is also called Valentine's orchid, which is very good-looking. What is the planting method of the orchid? How do you cut it? What is fancy language? The planting method of heart leaf ball orchid: the heart leaf ball orchid grows more pleasing.

The leaf of the whole plant is a heart, so it is also called Valentine's orchid, which is very good-looking. What is the planting method of the orchid? How do you cut it? What is fancy language?

The planting method of Cymbidium:

Heart leaf ball orchid grows more pleasing, it likes scattered light conservation, basin soil loose, good drainage on the line, watering to keep the basin soil slightly moist, do not accumulate water! Be careful not to rot the root on the line, maintain the environment should also be ventilated, keep clean!

It likes a warm, moist environment, and the most suitable temperature for growth is 18-28 degrees. Of course, it still has to keep the times dry in winter. It is safe to survive the winter above 10 degrees, but it is not good if it is less than 5 degrees, and it is easy to hang up.

Heart-leaf ball orchid has thick leaves and lovely flowers, it looks like succulent plants, of course, many other varieties are not succulent plants, but more like vines, of course, we like, like climbing vines can also grow ball orchids ah, raised around the balcony, the whole balcony can be covered with ball orchids!

1. Selection of basin soil

As long as loose, good drainage is enough, of course, but also a little bit of fertility, the general choice of garden soil + humus soil + river sand 2:2:1 mix on the line.

Of course, it is no problem to raise it directly with succulent soil.

2. Proper lighting

Ball orchids do not like exposure, scattered light is the best, just bought in a bright, ventilated environment to keep, grow strong should also avoid direct sunlight, otherwise the leaves will become flat, or even yellow and withered.

Shade in summer to prevent direct light, otherwise the leaf color is easy to turn yellow.

But if you put it in the lack of light for a long time, the color of the leaves will fade and it will be difficult to blossom.

3. Watering

Watering should not be too afraid of water supply, as long as the basin soil is dry, it will not be a big problem as long as the basin soil does not accumulate water. it is necessary to reduce watering in hot summer and cold winter, and the soil is slightly dry before watering.

4. Maintenance tips

You can make some brackets for the climbing vine to grow, or you can make a small heart-shaped iron ring, which is even more beautiful! Usually maintenance should also let it see a little less intense light, so that it can blossom well, if it is a balcony with a little light, it is the most suitable!

5. Mode of reproduction

The way of propagation of Cymbidium is relatively simple, cutting and pressing branch propagation are all right!

Cutting is to cut a section of branches around 10cm, dry the wound slightly, coat the bottom with rooting powder, and re-insert it into the slightly damp potted soil (cuttings are the easiest to live at about 20-25 ℃).

Of course, a leaf (with petiole) can also grow roots and sprout, it looks better, the treatment method is the same as above!

It usually takes 8 to 10 weeks to grow roots, and two weeks later they can be transplanted.

The floral words of Cymbidium:

Pass on love.

The culture method of Cymbidium, when will it blossom?

When it comes to heart leaf ball orchid, many friends will certainly ask the editor, what are you talking about? Why didn't I know? In fact, it has a more popular name "Valentine's ball orchid". If you don't know this, just go with the editor to get a brief understanding of it. . When does the heart leaf ball orchid blossom heart leaf ball orchid also known as Lan orchid, wax flower, wax spring flower, fleshy stem, leaf thick succulent, shaped like a heart. It has 30-50 flowers and peduncles 1-1, 5 cm long. Pedicel 2, 5-3 cm long. Sepals 2, 5 mm in size. Corolla white, radiate, plump, 1 cm in diam., lobes obtusely triangular, size 2, 5 mm, Corona outer angle sharp. Heart-leaf orchid flowers are generally in full bloom in May, milky white flowers with purplish red, a cluster of very good-looking, in addition, its flower language is love spread, very suitable for girls like forehead. . The breeding method of Cymbidium angustifolia uses cutting or striping method to propagate, which is easy to root. Generally speaking, cuttage propagation is carried out in late spring, cutting a stem tip of about 10 cm, dipping the incision with rooting agent and then inserting it into the soil for cutting. buds can also be used. When cutting, the soil temperature should be kept at 20 ℃ 25 min. After about 8 or 10 weeks of culture, the roots will grow, and after two weeks, the roots can be transplanted. High branch crimping can be carried out in spring. Cymbidium is suitable for indoor cultivation. Pot soil can be mixed with garden soil, rotten leaf soil and sand at the ratio of 2:2:1, and the drainage should be good. The amount of light will affect the bright degree of ball orchid flowering, if you want to have a colorful and long flowering period, it is best to put the ball orchid in the brightest part of the room, but to avoid direct sunlight so as not to burn the leaves. The pot plant should be placed in a sunny place to avoid direct sunlight. The heart leaf ball orchid room can be placed not far from the south window to keep the leaves green and bright and blossom well. .. the heart leaf ball orchid should be exposed to sunlight to absorb ultraviolet rays in spring and autumn, and the soil fertilizer should not be too heavy, but to keep the soil soft, you can spread some moss on top of the flowerpot in order to moisturize, and the sun exposure time in summer should not be too long. If the rotten roots are serious, the planting soil should be changed, and the flowerpots should be replaced or disinfected before planting. The new soil should be kept dry and not too wet, and only when new buds grow can you continue watering. It is best not to water during the replacement period, and spray the blade surface with a sprayer. It is best placed in a sunny and ventilated place. The best place for sunlight is direct sunlight in the morning or half of the afternoon. . The editor concludes that the pigment of the orchid is elegant, just like a wax handicraft, and the thick leaves are like pieces of "heart", which is very strange. Potted plants can be displayed on the table, several, cellar terrace, balcony and other places to enjoy. Do you like this lovely little plant very much? Share it with your friends if you like. Growing plants together is a very interesting process. Introduction of Hoya kerrii Cymbidium: how to raise Cymbidium / how to breed Cymbidium Hoya kerrii the introduction of Cymbidium belongs to Lomaceae, Lactuca subfamily, like yin and dampness, shaped like a heart. It has a more popular name "Valentine's ball orchid". If there is sunshine in spring and autumn, the soil fertilizer should not be too heavy, but to keep the soil soft, you can spread some moss on top of the flowerpot in order to moisturize, the summer sun exposure time should not be too long, the rotten leaves should be cut off in time, if the rotten root is serious, the planting soil should be changed, and the flowerpot should be replaced or disinfected before planting, the new soil should be kept dry and should not be too wet. Wait for new buds to continue watering, it is best not to water during the replacement, use a sprayer to spray the blade surface, it is best to place in a sunny and ventilated place, the best place for sunlight is direct sunlight in the morning or half of the afternoon. Also known as Lalan, wax flower, wax spring flower, succulent stem, thick succulent leaves, shaped like a heart. Potted plants should be placed in indirect light or half-day shade, often spraying water to the leaves. The suitable temperature for growth is 18 ℃-28 ℃, and the overwintering temperature is about 5 ℃. Description of the morphological characteristics of Cymbidium-a subshrub. Stems and branches climbing to 2 m, yellowish gray. Petiole stout, plump 5 mm, with 3-5 adaxial glands; leaf blade ovate to long ovate, 5-9 × 4-5 cm in size, thinly leathery when dry, adaxial glabrous, abaxial midvein plump, base subcordate, apically pointed to obtuse-rounded; lateral veins 6-8 pairs. Axillary umbels, hemispheric, with 30-50 flowers; peduncle 1-1, 5 cm long. Pedicel 2, 5-3 cm long. Sepals 2, 5 mm in size. Corolla white, radiate, plump, 1 cm in diam.; lobes obtusely triangular, 2, 5 mm in size. Corolla outer horn sharp. Flowering in May. The ecological habit of Cymbidium is warm and humid, and the suitable temperature for growth is 18-28 ℃. After the middle of October, the temperature should be 10-14 ℃, overwintering in a dry and sunny place, and the lowest overwintering temperature is 7 ℃. If it is less than 5 ℃, it is vulnerable to cold injury, causing defoliation and even the death of the whole plant. The regional distribution of Cymbidium: born in low pine forest; produced in Guangxi. Cultivation techniques and management methods of Cymbidium usually we regard Cymbidium as succulent. It is true that many species of this genus are fleshy, but most of them are not really succulent. Cymbidium is also often regarded as a vine, of course, there are many species of climbing trend is very small or none at all. Enthusiasts collect Cymbidium plants from different starting points and cultivation methods, some like twining vines, some like woody tufted shrubs, some like potted plants, some like to make them epiphytic, and some plant them in pots at the beginning. as a result, what was entangled later became clinging growth, and finally they didn't even want their original roots. Some species cling to the supports by winding and rooting at the same time, but some species grow completely upright into small shrubs. Some species look like small shrubs at first, and then begin to stick out climbing vines when they grow to a few feet high. Some species are woody, some are soft and succulent, some have woody stems and succulent leaves, while others have slender stems and leaves as thin as paper. Cultivation and management ball orchid is suitable for indoor cultivation. Pot soil can be mixed with garden soil, rotten leaf soil and sand at the ratio of 2:2:1, and the drainage should be good. The amount of light will affect the bright degree of ball orchid flowering, if you want to have a colorful and long flowering period, it is best to put the ball orchid in the brightest part of the room, but to avoid direct sunlight so as not to burn the leaves. Pot plants should be placed in the sun to avoid direct sunlight, indoor can be placed not far from the south window, can keep the leaves green and bright, flowering well. In summer, you need to move to the shade to prevent the strong light from shining directly, otherwise the leaf color will easily turn yellow. If you put it in the lack of light for a long time, the color of the leaves will become lighter, and the flowers will be less and less colorful. Wire can be used as a circle, twining the branches around them, allowing them to climb and grow, which is more conducive to daylighting. The position of the pot plant can not be moved after budding, and the flower ball is always facing the light. The method of propagation is cuttage or striping, and it is easy to take root. Generally speaking, cuttage propagation is carried out in late spring; a section of stem tip of about 10 cm is cut, and the cut is stained with rooting agent and then inserted into the soil for cutting. buds can also be used. When cutting, the soil temperature should be kept at 20 ℃ 25 min. After about 8 or 10 weeks of culture, the roots will grow, and after two weeks, the roots can be transplanted. High branch crimping can be carried out in spring. The flower language of the heart leaf orchid love ~ spread ~ the heart leaf ball orchid picture

 
0