How does Parthenocissus grow and reproduce? what's the alias?

As long as Parthenocissus is planted on the wall, the whole wall may be covered, and the whole house looks like a forest, forming a natural barrier for the house. How can Parthenocissus be planted? What is the method of reproduction? What other aliases are there?

How does Parthenocissus grow:

Parthenocissus has strong adaptability and likes shady and humid environment, but it is not afraid of strong light, cold, drought, barren and wide climate adaptability. it can also maintain semi-evergreen or evergreen in winter south of warm temperate zone.

It is resistant to pruning, afraid of stagnant water, lax requirements on the soil, wet environment or sunny place, can thrive, but grow best in wet and fertile soil.

Parthenocissus has strong resistance to harmful gases such as sulfur dioxide and hydrogen chloride and has the ability to adsorb dust in the air.

Disease control of Parthenocissus officinalis:

The diseases of Parthenocissus are powdery mildew, leaf spot and anthracnose, and aphids are common.

1. Disease

Parthenocissus parthenocissus due to strong resistance, the occurrence of diseases and insect pests are less, but also occur from time to time, especially in the rainy season, due to high temperature and humidity prone to powdery mildew, leaf spot and anthracnose, when the disease occurs, you can use 50% carbendazim, thiophanate or chlorothalonil 500 times 800 times, spray every 7 days or so, 2 times in a row.

2. Pest control

The insect pests are mainly aphids, which can be controlled by chloramphenicol, chlorpromazine, or 500 / 1000 times of cyhalothrin.

The breeding method of Parthenocissus:

Propagate with cuttings, striping and sowing.

Cuttage

It can be carried out from after falling leaves to before sprouting. The seeds were collected in October and could be sown in winter or in spring the following year. Transplantation or colonization is carried out in the deciduous stage.

Parthenocissus is usually propagated by cuttings, and it has been proved that seed propagation is also a good way, with a seedling emergence rate of up to 80%, and the seedling stage management is also more convenient.

Points for attention in breeding Parthenocissus:

1. Seed sand storage and germination

In September, the berries were picked immediately when the berries were purple, washed and dried, disinfected with 0.05% carbendazim solution, drained and stored in wet sand.

To the first ten days of March of the following year, soak the seeds in 45 degrees warm water for two days, change the water twice a day, then mix well with wet sand seeds at 2:1, place them in a place where the sun is sheltered from the wind, cover with straw bags, and often spray fine water to keep moist. After about 20 days, the seeds can be sown when 20% of the seeds are exposed.

2. Sowing seeds

First, the seeding bed is leveled, watered thoroughly, and the seeds and sand are sown on the bed together, with a sowing rate of 100 grams per square meter. Covered with 1cm thick loose humus soil under the forest, built on a small arch shed, covered with polyethylene plastic film.

3. Seedling management

After the cotyledons are unearthed, the film should be covered by day and night in sunny days and covered all day in cloudy and rainy days, so as to increase the soil temperature, promote the emergence of seedlings neatly, and prevent the harm of beetles. In addition, always sprinkle water to keep the soil moist.

4. Transplanting and later stage management

After the true leaves were unfolded, they were transplanted at a density of 1 × 1 foot on a cloudy day or after 03:00 in the afternoon. Immediately after planting, pour clear fecal water (1:8) once. Do not accumulate water for too long in the rainy season.

Two months later, the vine is generally more than 60 centimeters long, and the heart can be picked for the first time to prevent the vines from winding around each other and to make the vines sturdy. Pick the heart once a month, combined with supplementary care. Take the above measures, to the deciduous period, the average thickness of rattan seedlings can reach more than 0.5 cm, can be planted out of the nursery.

Parthenocissus is cold-resistant and drought-resistant, and likes the overcast and wet environment. The requirement of soil is not strict, and the climate adaptability is extensive. The main propagation methods are cutting and striping, which can be carried out in spring to bury the branches of the old plant into the soil to take root.

In the following spring, it was cut off from the mother and planted separately.

Hardwood cuttings are carried out from March to April. The hardwood is cut into 10-15 cm segments and inserted into the soil, watered thoroughly and kept moist.

Softwood cuttings were used to extract new branches of the same year and carried out in summer. The vitality of Parthenocissus is extremely strong, so it is easy to survive by breeding.

After the seedlings survive and grow for one year, they can be transplanted and planted. When planting, turn the soil deeply and apply enough rotten base fertilizer. When the seedling grows to 1 meter long, lead wire and rope are used to pull to the climbing object.

During the growing period, liquid fertilizer can be applied for 2-3 times. And often hoe the grass and loosen the soil to avoid being submerged by the grass and promote its healthy growth. Parthenocissus is afraid of waterlogging and should pay attention to prevent the soil from accumulating water.

Parthenocissus is resistant to pruning. In the process of growth, the branches of doors and windows can be trimmed and arranged according to feelings, so as to keep them clean, beautiful and convenient.

The alias of Parthenocissus:

Wall climbing tiger, brocade, flying centipede, fake grapevine, red silk grass, stone blood, iron letter, iron railing, bundle stone dragon, maple vine, small insect lying grass, red grape vine, Bashan tiger, red kudzu, mountain tiger; summer flowering, small, yellowish green, berries purple and black.

This is the end of the introduction on the planting method and reproduction of Parthenocissus. If the creeps really grow all over the wall, the outside looks very good-looking, but if they live for a long time, they feel that they are not good-looking, and the walls are full of creeps. It's easy to attract geckos.

How to grow Parthenocissus, how to plant Parthenocissus

✤

The scientific name of Parthenocissus is boston ivy, which is not only a vine plant, but also a plant type of Parthenocissus in the grape family. Parthenocissus is a soft plant, which generally needs clothes, walls or flower racks to grow, and it will not take long to see patches of Parthenocissus in the corner. This plant not only has high greening and ornamental value, but also has medicinal value. Florescence is usually in summer and the flowers are small. The color is yellowish green and will produce purple-black berries.

How to grow ✤ Parthenocissus Parthenocissus is a large perennial deciduous woody vine, the shape of this plant is similar to wild grapevines, generally like to attach or climb on walls and rocks, the vine stem is very long and tough enough, the length can reach 18 meters, that is, about 60 feet, florescence is usually in summer and the flowers are small and not obvious in clusters, the flowers are yellowish green, and the berries are purple and black. Leaves are generally opposite growth, Parthenocissus flowers are mostly bisexual and monoecious, often born on the short branches between the two leaves, the length is about 4-8 cm, shorter than the petiole.

How to grow ✤ Parthenocissus-first of all, the planting method of Parthenocissus needs to know the living habits of this plant. Parthenocissus has strong adaptability and likes to grow in a cool and humid environment, but it is also not afraid of bright light. Parthenocissus can tolerate cold, drought and barren, so it is easy to breed, and the adaptability of climate is also very extensive. Semi-evergreen or evergreen can be maintained even in winter south of the warm temperate zone, but Parthenocissus is a kind of plant that is afraid of stagnant water. although it does not have much demand on the soil, it grows best in wet and fertile soil.

How to grow ✤ Parthenocissus Parthenocissus-breeding method one, sowing method. After harvesting Parthenocissus, we need to rub off the peel and pulp of this plant, wash and dry it and store it at low temperature in wet sand for a winter, mainly because heat preservation and moisturizing can help accelerate budding. it is best to sow seeds in the open field in the early spring of the second year, preferably covered with thin film. Parthenocissus can emerge in early May and can be cultivated in 1-2 years. Second, cutting method. Cutting needs to cut 20-30 cm of Parthenocissus stem vine in early spring and insert it into the prepared open field seedbed. Remember to irrigate and keep the soil moist, so that the vine can soon survive. Of course, we can also cut with twigs and leaves in summer and autumn, when we need shade and watering conservation, good breeding can also quickly produce new branches, the survival rate of cutting is relatively high and widely used. Third, the strip pressing method. The wavy striping method can be used when Parthenocissus is planted and carried out in wet and cloudless weather in the rainy season. the survival rate of this weather is relatively high, and we can also separate and transplant in autumn and plant in the second year. Remember to take good care to speed up the growth. Planting of ✤ Parthenocissus parthenocissus-Note 1, seed sand storage and germination. Autumn September is the ripe season for Parthenocissus berries, when we need to pick, wash and dry the berries when they are purplish blue, then disinfect the surface with a small amount of carbendazim solution and drain it for wet sand stratification and storage. Second, seedling management. After the cotyledons of Parthenocissus are unearthed, the film on the surface needs to be covered during the day and night on sunny days, while in cloudy and rainy days, it needs to be covered all day to raise the soil temperature and promote the emergence of seedlings neatly, and it can also control some diseases and insect pests. and Parthenocissus also need to often sprinkle water to keep the soil moist.

Conclusion: Parthenocissus is a kind of plant type which is very effective in purifying the air. it can not only resist harmful gases, but also has a certain adsorption capacity to the dust in the air, but also has an easy-going character, occupies a small area and grows fast. after growing up, the green coverage area is very large, the first class is climbing on the walls and rocks, the medicinal value of Parthenocissus is also high, the rhizome can be used as medicine to break blood stasis and detumescence, and the fruit can be used to make wine. Like friends can plant in the courtyard as a decoration, the above is the editor on how to grow Parthenocissus and Parthenocissus planting methods, I hope to be able to help you.

How to grow Parthenocissus? Planting methods and matters needing attention of Parthenocissus

Many people particularly like the kind of climbing green plants, generally this kind of plant growth ability is relatively strong, and a large area of the effect is more good-looking, such as Parthenocissus. Parthenocissus is one of the most widely used materials in vine greening plants, which can be used to afforest the walls of houses, parks and rocks. It can not only beautify the environment, but also cool the air and reduce noise. How to grow Parthenocissus? the editor takes you to understand the planting methods and points for attention of Parthenocissus.

Parthenocissus parthenocissus green leaf TV background wall

Basic information of Parthenocissus:

Parthenocissus (Latin name: Parthenocissus tricuspidata) is also known as bundled stone dragon, maple vine, caterpillar grass, red silk grass, red kudzu, mountain tiger, red grape vine, Bashan tiger, grape plant. Summer flowers, small, yellowish green, purple-black berries. Often climb on walls or rocks, widely seen in all parts of our country. The root and stem of Parthenocissus can be used as medicine, which has the effect of breaking blood stasis and detumescence, and the fruit can make wine.

How to grow Parthenocissus?

Parthenocissus can be propagated and planted by sowing method, cutting method and striping method.

[sowing method] the harvested seeds are rubbed to remove the peel and pulp, washed and dried and stored in wet sand at low temperature for a winter. Heat preservation and moisturizing are beneficial to sprouting. The seeds can be sowed in the early and middle of March of the next year, covered with film, and seedlings can emerge in early May. Nursery after 1-2 years of culture.

[cutting method] cut the stem vine 20~30cm in early spring, insert it into the open field nursery bed, irrigate and keep it moist, and soon survive. It can also be cut with twigs and leaves in summer and autumn, shaded and watered, and new branches can be produced quickly. Cuttings have a high survival rate and are widely used. The hardwood cuttings were carried out from March to April. The hardwood was cut into 10-15 cm sections and inserted into the soil, watered thoroughly and kept moist. Softwood cuttings were used to extract new branches of the same year and carried out in summer.

[striping method] the wavy striping method can be carried out in the wet and cloudless weather in the rainy season, and the survival rate is high. It can be separated and transplanted in autumn and planted in the following year.

Points for attention in planting Parthenocissus:

In the process of breeding and planting, Parthenocissus should pay attention to the following:

1. Seed sand storage and germination. In September, when the berries were ripe purple-blue, they were picked immediately, washed and dried, surface disinfected with 0.05% carbendazim solution, drained and stored in wet sand layers. In the first ten days of March of the following year, soak the seeds in 45 ℃ warm water for two days, change water twice a day, then mix well with wet sand seeds at 2:1, place them in a place where the sun is sheltered from the wind, cover with straw bags, and often spray fine water to keep moist. After about 20 days, the seeds can be sown when 20% of the seeds are exposed.

2. Sowing seeds. First, the seeding bed is leveled, watered thoroughly, and the seeds and sand are sown on the bed together, with a sowing rate of 100 grams per square meter. Covered with 1cm thick loose humus soil under the forest, built on a small arch shed, covered with polyethylene plastic film.

3. Seedling management. After the cotyledons are unearthed, the film should be covered by day and night in sunny days and covered all day in cloudy and rainy days, so as to increase the soil temperature, promote the emergence of seedlings neatly, and prevent the harm of beetles. In addition, always sprinkle water to keep the soil moist.

4. Transplanting and later stage management. After the true leaves were unfolded, they were transplanted at a density of 1 × 1 foot on a cloudy day or after 03:00 in the afternoon. Immediately after planting, pour clear fecal water (1:8) once. Do not accumulate water for too long in the rainy season. Two months later, the vine is generally more than 60 centimeters long, and the heart can be picked for the first time to prevent the vines from winding around each other and to make the vines sturdy. Pick the heart once a month, combined with supplementary care. Take the above measures, to the deciduous period, the average thickness of rattan seedlings can reach more than 0.5 cm, can be planted out of the nursery.

5. Fertilization. During the growing period, liquid fertilizer can be applied for 2 or 3 times. And often hoe the grass and loosen the soil to avoid being submerged by the grass and promote its healthy growth. Parthenocissus is afraid of waterlogging and should pay attention to prevent the soil from accumulating water. Parthenocissus is resistant to pruning. In the process of growth, the branches of doors and windows can be trimmed and arranged according to feelings, so as to keep them clean, beautiful and convenient.

6. Diseases and insect pests. Pay attention to the following diseases and insect pests: powdery mildew, leaf spot and anthrax. Common aphid harm.

Parthenocissus grows faster and climbs taller. If it is planted in places such as home balconies, it is best to say hello to the neighbors in order to avoid the impact of climbing to the neighbors. Parthenocissus planting methods and points for attention and other content to talk to you here, more related information, please continue to follow us.