MySheen

The cultivation method of Ping an Tree how is the leaf yellowing?

Published: 2024-11-24 Author: mysheen
Last Updated: 2024/11/24, Chinese people like to cultivate plants most is Geely, Ping an tree is very auspicious, many people like farming very much, let's take a look at the breeding method of Ping an tree. What's with the yellowing leaves of Ping an tree?

Chinese people like to cultivate plants most is Geely, Ping an tree is very auspicious, many people like farming very much, let's take a look at the breeding method of Ping an tree. How is the safe tree leaf yellowing to return a responsibility?

The culture method of Ping an tree:

1. Potted soil selection:

Pot soil must choose loose, fertile and well-drained humus or sandy soil, alkaline soil and clayey soil is the worst, flower friends in the north pay attention to supplement alum fertilizer water, or use compost soil.

2. Suitable temperature:

The most suitable temperature for the growth of Ping an tree is 2830 ℃, and the lowest temperature should not be lower than 5 ℃.

It is too cold to be heated in winter, so you can cover it with soil or bag it.

3. Proper lighting:

Ping an tree has a high demand for light and needs sufficient scattered light. It is afraid of strong light exposure and should effectively protect trees from shading in the hot summer sun.

4. Proper watering:

Spring and summer are the growing season, always keep the basin soil moist but not wet, and often spray water to the foliage and culture environment to maintain air humidity.

When watering, you can add some vinegar to improve the acidity of the soil, especially in view of the relative lack of acid in the soil in the north, of course, you should choose vinegar without sodium chloride and see the composition for yourself.

5. Loosen the soil and change the basin:

Potted safe trees had better loosen the soil once a month in the growing season and be careful not to hurt their roots. Small trees can change pots once a year, while large trees can change pots every 2-3 years.

When changing pots, part of the necrotic roots can be cut off to ensure the normal growth of potted plants.

What's wrong with the yellowing leaves of Ping an tree:

1. Too much or too little watering

For those flower friends who like to water the Ping an tree every day, or several times a day, you are torturing it. If you see that the young leaves turn yellow, but the old leaves are all right, you should water too much and control the water.

If the basin soil is dry for a long time or the environment is too dry, its old leaves will turn yellow, followed by fallen leaves. At this time, it is necessary to replenish water and pay attention to check whether the basin soil is hardened.

2. Excessive fertility

Fertilizing too frequently or accidentally giving thick fertilizer will make the young leaves thicken, but will soon turn yellow, so it is necessary to water it several times to dilute the soil fertility.

3. Never apply fertilizer

If you have never given fertilizer or rarely applied fertilizer, you can see that the tender leaves are very weak and the tender stems turn yellow, so you can add a little thin liquid fertilizer in half a month. Apply thin cake fertilizer or alum once a month.

After entering autumn, you can spray 0.3% potassium dihydrogen phosphate solution twice and stop topdressing in winter.

This is the end of the introduction on the breeding methods of Ping an trees and the treatment methods for the causes of yellowing leaves. If you want to raise Ping an trees well, it is not easy.

The Culture method of Ping an Tree solution to the yellowing of leaves of Ping an Tree

The cultivation of Ping an trees can be in many forms. In this paper, we mainly talk about the breeding methods in the home. In indoor flower culture, we should pay attention to and grasp six main problems, that is, the selection of pot soil when planting. Watering, temperature, light control, fertilization conservation and pest control during culture. The editor will introduce the breeding methods of Ping an tree from the above aspects. First of all, the editor briefly introduces the basic information of Ping an Tree.

I. A brief introduction to Ping an Tree

The real name of Ping an tree is Lanyu cinnamon. Ping an tree is just another name. It belongs to evergreen Lauraceae and is native to Lanyu Island in Taiwan. The branches and poles of Ping an are dignified, yellowish green, smooth and hairless. The leaves of Ping an trees are generally opposite or close to each other. the surface of the leaves is bright green and has a metallic luster, while the back is grayish green. There are many kinds of breeding functions of Ping an tree, it can be used to make potted landscape plants, but also can be very beautiful landscape plants, in addition, it also has the effect of purifying indoor air, absorbing decoration pollution and so on. So what are the breeding methods of Ping an tree? the following editor will introduce you to the breeding method of Ping an tree.

II. Culture methods of safe trees

Real scene picture of safe tree potted plant

The cultivation methods of potted safe trees should be based on its ecological habits to effectively control plant growth factors such as light, water, soil, fertilizer and so on. While calming trees like warm, humid, sunny environment, at the same time more tolerant to shade, not resistant to drought, cold and salinity, so what should be paid attention to in order to pay attention to the growth habits of Ping an trees?

The main results are as follows: 1. Potted soil selection: the potted soil of Ping an tree is suitable to use acid sandy loam with loose and fertile, good drainage and rich organic matter, which is also the pot soil requirement of most indoor flower farming. If the soil adhesion is heavy or the acidity is low, it will cause the leaves of aquaculture to yellowing, sprouting and regeneration to decrease, thus affecting the growth life of plants.

2. The suitable temperature for culture: the optimum temperature for the growth of Ping an tree is 22 ℃ to 30 ℃, and the lowest temperature should not be lower than 5 ℃. In case of freezing or days of frost should do a good job of heat preservation, in order to prevent bark cracking, branches and leaves withered, serious may be frozen to death.

The leaves of the safe tree with metallic luster

3. Sunlight requirements: all plant farming needs good light to carry out photosynthesis in order to promote its effective growth. As a light-loving plant, Ping an tree has a natural demand for light, but at the same time it is also afraid of strong light exposure, so it should provide effective shading protection for tree plants in the hot summer sun, and potted plants can also be placed in a position with weak indoor sun. it can still grow well, because Ping an tree is relatively able to tolerate shade. In addition, plants that have grown for three or five years should be protected from sunlight, and plants that have grown for six to ten years can also be exposed to more light to promote their effective growth.

4. How to grasp watering: during the growing period of spring and summer, Ping an tree should always keep its basin soil moist and spray water to the leaf surface and culture environment frequently so as to maintain good air humidity in its culture environment. In addition, when watering, some vinegar can be added to improve the acidity of the soil, especially in view of the relative lack of acid in the northern soil, vinegar can be added to the watering to adjust the acidity of the soil.

5. Knowledge of aquaculture and fertilization: pots that have just been planted can be applied once a month after teething, but in the process of fertilization, we should pay attention to the sparse and thin application, and do not put too much manure, otherwise it is easy to cause the roots of farmed plants to be burned, thus causing the leaves to wither and yellow until they die. In addition, some potassium dihydrogen phosphate solution can be applied before winter to enhance the cold resistance of the plant.

Safe tree pot planting map

6. Loosening the soil and changing pots: it is best to loosen the soil once a month during the growing season of potted Ping an trees, so as to keep their roots in a good state of permeability. Small Ping an trees can change pots once a year, while large ones can change pots every 2-3 years. When changing pots, part of the necrotic roots can be cut off in front to ensure the normal growth of potted plants.

Third, the causes and solutions of yellowing leaves of Ping an trees.

Yellowing of leaves is a relatively common phenomenon in the process of indoor flower culture, and it is inevitable that leaves will not turn yellow in indoor culture of Ping an trees, and the main reasons for yellowing or shedding of leaves of Ping an trees are as follows:

First, due to accidents or special circumstances, the root system of the plant is seriously damaged, which leads to the yellowing of leaves.

Second, the yellow and fallen leaves of Ping an tree were caused by freezing injury when the indoor temperature was below 5 ℃.

Third, too much watering leads to rotten roots at the bottom, thus causing plants to yellowing and falling leaves.

A picture of the yellowing leaves of Ping an trees.

Fourth, the water quality is alkaline and heavy, which leads to the slow yellowing of leaves, which is more common in the north, especially in other places.

Fifth, improper fertilization, excessive fertilization and excessive concentration, resulting in water loss, atrophy and necrosis of nutritious fibrous roots.

Sixth, the leaves are withered and yellowed after exposure to the hot sun for a long time.

In view of the above reasons for the yellowing of the leaves of the tree, the solution to the problem is: if you find that the leaves of the tree are yellowing, you should first check whether the root system is growing normally. If you find that the root system is partially rotten, you should cut off the rotten part in time, and cut off all the dead branches and leaves, and then replant them.

During re-cultivation, some moist fine sand can be spread around the shear incision of the root system to promote wound healing and sprout new roots, and pay attention to less watering and more spraying, when the newly cultivated plants grow new leaves, relevant fertilization can be carried out, and sunlight can be appropriately increased to promote growth.

The Culture method of Ping an Tree solution to the yellowing of leaves of Ping an Tree

The cultivation of Ping an trees can be in many forms. In this paper, we mainly talk about the breeding methods in the home. In indoor flower culture, we should pay attention to and grasp six main problems, that is, the selection of pot soil when planting. Watering, temperature, light control, fertilization conservation and pest control during culture. The editor will introduce the breeding methods of Ping an tree from the above aspects. First of all, the editor briefly introduces the basic information of Ping an Tree.

I. A brief introduction to Ping an Tree

The real name of Ping an tree is Lanyu cinnamon. Ping an tree is just another name. It belongs to evergreen Lauraceae and is native to Lanyu Island in Taiwan. The branches and poles of Ping an are dignified, yellowish green, smooth and hairless. The leaves of Ping an trees are generally opposite or close to each other. the surface of the leaves is bright green and has a metallic luster, while the back is grayish green. There are many kinds of breeding functions of Ping an tree, it can be used to make potted landscape plants, but also can be very beautiful landscape plants, in addition, it also has the effect of purifying indoor air, absorbing decoration pollution and so on. So what are the breeding methods of Ping an tree? the following editor will introduce you to the breeding method of Ping an tree.

II. Culture methods of safe trees

Real scene picture of safe tree potted plant

The cultivation methods of potted safe trees should be based on its ecological habits to effectively control plant growth factors such as light, water, soil, fertilizer and so on. While calming trees like warm, humid, sunny environment, at the same time more tolerant to shade, not resistant to drought, cold and salinity, so what should be paid attention to in order to pay attention to the growth habits of Ping an trees?

The main results are as follows: 1. Potted soil selection: the potted soil of Ping an tree is suitable to use acid sandy loam with loose and fertile, good drainage and rich organic matter, which is also the pot soil requirement of most indoor flower farming. If the soil adhesion is heavy or the acidity is low, it will cause the leaves of aquaculture to yellowing, sprouting and regeneration to decrease, thus affecting the growth life of plants.

2. The suitable temperature for culture: the optimum temperature for the growth of Ping an tree is 22 ℃ to 30 ℃, and the lowest temperature should not be lower than 5 ℃. In case of freezing or days of frost should do a good job of heat preservation, in order to prevent bark cracking, branches and leaves withered, serious may be frozen to death.

The leaves of the safe tree with metallic luster

3. Sunlight requirements: all plant farming needs good light to carry out photosynthesis in order to promote its effective growth. As a light-loving plant, Ping an tree has a natural demand for light, but at the same time it is also afraid of strong light exposure, so it should provide effective shading protection for tree plants in the hot summer sun, and potted plants can also be placed in a position with weak indoor sun. it can still grow well, because Ping an tree is relatively able to tolerate shade. In addition, plants that have grown for three or five years should be protected from sunlight, and plants that have grown for six to ten years can also be exposed to more light to promote their effective growth.

4. How to grasp watering: during the growing period of spring and summer, Ping an tree should always keep its basin soil moist and spray water to the leaf surface and culture environment frequently so as to maintain good air humidity in its culture environment. In addition, when watering, some vinegar can be added to improve the acidity of the soil, especially in view of the relative lack of acid in the northern soil, vinegar can be added to the watering to adjust the acidity of the soil.

5. Knowledge of aquaculture and fertilization: pots that have just been planted can be applied once a month after teething, but in the process of fertilization, we should pay attention to the sparse and thin application, and do not put too much manure, otherwise it is easy to cause the roots of farmed plants to be burned, thus causing the leaves to wither and yellow until they die. In addition, some potassium dihydrogen phosphate solution can be applied before winter to enhance the cold resistance of the plant.

Safe tree pot planting map

6. Loosening the soil and changing pots: it is best to loosen the soil once a month during the growing season of potted Ping an trees, so as to keep their roots in a good state of permeability. Small Ping an trees can change pots once a year, while large ones can change pots every 2-3 years. When changing pots, part of the necrotic roots can be cut off in front to ensure the normal growth of potted plants.

Third, the causes and solutions of yellowing leaves of Ping an trees.

Yellowing of leaves is a relatively common phenomenon in the process of indoor flower culture, and it is inevitable that leaves will not turn yellow in indoor culture of Ping an trees, and the main reasons for yellowing or shedding of leaves of Ping an trees are as follows:

First, due to accidents or special circumstances, the root system of the plant is seriously damaged, which leads to the yellowing of leaves.

Second, the yellow and fallen leaves of Ping an tree were caused by freezing injury when the indoor temperature was below 5 ℃.

Third, too much watering leads to rotten roots at the bottom, thus causing plants to yellowing and falling leaves.

A picture of the yellowing leaves of Ping an trees.

Fourth, the water quality is alkaline and heavy, which leads to the slow yellowing of leaves, which is more common in the north, especially in other places.

Fifth, improper fertilization, excessive fertilization and excessive concentration, resulting in water loss, atrophy and necrosis of nutritious fibrous roots.

Sixth, the leaves are withered and yellowed after exposure to the hot sun for a long time.

In view of the above reasons for the yellowing of the leaves of the tree, the solution to the problem is: if you find that the leaves of the tree are yellowing, you should first check whether the root system is growing normally. If you find that the root system is partially rotten, you should cut off the rotten part in time, and cut off all the dead branches and leaves, and then replant them.

During re-cultivation, some moist fine sand can be spread around the shear incision of the root system to promote wound healing and sprout new roots, and pay attention to less watering and more spraying, when the newly cultivated plants grow new leaves, relevant fertilization can be carried out, and sunlight can be appropriately increased to promote growth.

 
0