How to make moss bonsai moisturizing

Moss bonsai is also a very good plant bonsai, the combination of green moss and a variety of plants and containers is still very beautiful. But what are the methods of making such moss bonsai? How to moisturize? Next, let's learn.

Making method of moss bonsai:

1. Rapid coating method

The method is relatively simple, put all the prepared bonsai rocks in clear water and soak them for a period of time, then sprinkle potato or potato powder evenly on the soaked rocks and basin soil, and finally cover the well-growing wet weeds on the watered rocks and basin soil, spray water every day, and about a week later the weeds will grow green moss.

2. Inoculation method of moss

This method is a little more complicated. First, select a few porn maps, adjust them to paste by adding water, stir the natural moss that is good in the field in the mud, then apply a little evenly on the soaked rocks and basin soil with a brush, water it every day, and the moss will grow out a few days later. Natural moss can be dried and ground into powder and can also be smeared with water.

3. The natural coating method

Natural moss, in fact, let the mountain rocks and basin soil grow moss naturally, rather than we artificially add moss. The method is still very simple. Put the rocks in the bonsai into the water basin, irrigate the water for washing rice and vegetables at a fixed time every day, keep the rocks moist, and put them in a shaded place indoors. Moss will grow on the rocks in two days. Soon.

4. Coating on basin surface

The moss bonsai still needs a little ornamental. The moss can be made more refined when it is made. You can use a film to lay it in a wet and sunless place indoors, put the original moss collected from nature on the film, water it every day, keep it moist, fertilize the moss after a second, and cover the basin soil in about half a month. The carefully taken care of moss is greener. # p# subtitle # e #

How to moisturize the moss bonsai:

1. Lighting: moss bonsai is a very unique bonsai compared with other bonsai, because bryophytes prefer a cool environment. And where there is plenty of sunshine, the moss loses water quickly. Therefore, in order to better keep the moss bonsai moist, it is necessary to put it in a cool and ventilated place indoors, less in the sun, especially in the midday sun.

2. Watering: if the moss is to grow for a long time, the demand for water is very high. After all, it is an aquatic plant, daily breeding should always keep the moss moist, in addition to the necessary watering every day, but also can spray water on the moss and the surrounding mountains and rocks to maintain the humidity of bonsai, so that bonsai is more moisturized. moss can also grow more luxuriantly.

3. Temperature: the moss is sensitive to temperature, the temperature is too high, and it is not easy for plants to grow. It is usually enough when the temperature is about ten to twenty degrees. If the temperature is high in summer, it is necessary to keep warm when the temperature is low in winter.

In fact, moss bonsai is really a very good bonsai, and compared with other bonsai, the biggest key to this kind of bonsai culture is to pay attention to moisture and cool environment, so it is very easy to raise, you can try.

The method of making moss bonsai and how to keep moss bonsai moist

When it comes to moss, many friends say they are unhappy because they don't have a good impression on people, so they know very little about moss bonsai. In fact, moss bonsai is also a very good plant bonsai, modern people have many ideas, creative, the combination of green moss and a variety of plants and containers of moss bonsai is still very beautiful. But what is the method of making such moss bonsai, and how can moss bonsai be moisturized?

The method of making moss bonsai

1. Rapid coating method

The method is relatively simple, put all the prepared bonsai rocks in clear water and soak them for a period of time, then sprinkle potato or potato powder evenly on the soaked rocks and basin soil, and finally cover the well-growing wet weeds on the watered rocks and basin soil, spray water every day, and about a week later the weeds will grow green moss.

2. The method of inoculating mosses is a little more complicated. first, select several porn pictures, adjust them to paste with water, and stir the natural moss that is good in the field in the mud. then use a brush to evenly apply a little evenly on the soaked rocks and basin soil, water it every day, and the moss will grow out a few days later. Natural moss can be dried and ground into powder and can also be smeared with water.

3. The natural coating method

Natural moss, in fact, let the mountain rocks and basin soil grow moss naturally, rather than we artificially add moss. The method is still very simple. Put the rocks in the bonsai into the water basin, irrigate the water for washing rice and vegetables at a fixed time every day, keep the rocks moist, and put them in a shaded place indoors. Moss will grow on the rocks in two days. Soon.

4. Coating on basin surface

The moss bonsai still needs a little ornamental. The moss can be made more refined when it is made. You can use a film to lay it in a wet and sunless place indoors, put the original moss collected from nature on the film, water it every day, keep it moist, fertilize the moss after a second, and cover the basin soil in about half a month. The carefully taken care of moss is greener.

How to moisturize the moss bonsai

1. Lighting: moss bonsai is a very unique bonsai compared with other bonsai, because bryophytes prefer a cool environment. And where there is plenty of sunshine, the moss loses water quickly. Therefore, in order to better keep the moss bonsai moist, it is necessary to put it in a cool and ventilated place indoors, less in the sun, especially in the midday sun.

2. Watering: if the moss is to grow for a long time, the demand for water is very high. After all, it is an aquatic plant, daily breeding should always keep the moss moist, in addition to the necessary watering every day, but also can spray water on the moss and the surrounding mountains and rocks to maintain the humidity of bonsai, so that bonsai is more moisturized. moss can also grow more luxuriantly.

3. Temperature: the moss is sensitive to temperature, the temperature is too high, and it is not easy for plants to grow. It is usually enough when the temperature is about ten to twenty degrees. If the temperature is high in summer, it is necessary to keep warm when the temperature is low in winter.

Conclusion: moss bonsai is really a very good bonsai, and compared with other bonsai, the biggest key to this kind of bonsai culture is to pay attention to moisture and cool environment, so it is easy to raise, you can try.

The steps of making moss bonsai (illustration)

[FAQ] the steps of making moss bonsai (illustration)

[expert answers]

The steps of making ● mossy bonsai

Picture: collecting moss

1. Collect moss

There are many kinds of moss suitable for decorating bonsai, and the most important thing is that Tess is not too long. There are also many ways to get moss. Some friends can buy moss online, or they can look for suitable plants on the ground, stones or tree trunks in the mountains. When collecting moss, use a small shovel or spatula to lift the soil from the bottom, bring a thin layer of soil under the moss, take as much as you use each time, and you don't have to dig too much at once.

Figure: drilling drain hole

2. Drilling drainage holes

Drill a drain hole in the center of the plate with a porcelain drill and cover the bottom of the plate with enough water to prevent dust during drilling and cool the drill. Drill in at an angle of 45 degrees to create a groove as a cut-in point to stabilize the bit. Lift the drill bit slowly, wash the dishes with water, continue drilling, and repeat the process until it is done.

Figure: adding substrate

3. Add substrates

Put a layer of gardening landscape cloth on the bottom of the plate to prevent pebbles and culture soil from blocking the drainage hole and add a thin layer of pebbles that help to drain the water.

Figure: fill the plate

4. Fill the plate

Fill the well-drained culture soil, not higher than the edge of the plate. To construct the main frame for the bonsai, we used a stone and a black handle fern to dig a hole with a spoon to plant vascular plants. Moss and lichens are laid on the cultivated soil and compacted, and the design elements are added in the order from large to small.

Picture: trimming moss

5. Prune the moss

Cut off a piece of moss that is slightly larger than the area to be laid, and carefully trim it with pliers to make it slightly larger than needed to tuck in the edge of the moss.

Image: stuffed with moss

6. Stuffed with moss

You can use any handy tool to plug the moss, here we use bamboo cuttings, and then use tweezers or medical clamps to remove leaf debris. The last moss used are moss, curly-tailed moss, reindeer moss and black-stalked fern.

Figure: fully bonded

7. Full bonding

Let the moss stick closely around the bonsai with the basin soil as the core. Water the finished moss bonsai and press down to make close contact with the moss.

Figure: future management

8. Future management

In order to improve the adhesion of moss, intensive irrigation was carried out for two months, watering once a week and spraying water mist at intervals of each watering. The frequency of watering is then adjusted according to rainfall and season. After this period, the need for watering is determined by the touch of moss. If it feels cool, it means it is wet.

Put the finished bonsai moss in the shade of the courtyard or in a cool and ventilated place at home, and then spray water with a spray can every 1-2 days to keep the moss moist, and slowly the moss will survive.

The making method of ● Moss Bonsai

First, quickly up the moss method. Soak the bonsai rocks in water for several days, then sprinkle them evenly on the rocks or basin soil with potato or potato powder, then cover them with moist weeds and spray water every day to grow moss in about a week.

Second, inoculate moss method. Select a few pieces of loess, grind and add water to paste, mix the natural moss in the mud, brush evenly on the soaked rock or soil surface with a small brush, often spray water, and the moss can be seen a few days later. You can also dry the fresh moss, grind it into powder, mix it with water or thin rice soup, apply it where the bonsai needs, move the basin to the shady and wet place, and keep it moist, then you can produce moss.

Third, the natural moss method. Put the prepared rocks in the basin, often water pottery rice water, pottery vegetable water, keep wet, put in the place where you can see the sky but not the sun, the water-absorbing stone is better.

Fourth, the coating on the basin surface. The moss used in the potted noodles of bonsai trees can be placed flat in a damp place where you can't see the sun in the sky, beat the original moss into mud and spread it evenly on the film, keep it moist, spray light fat and water once after emergence, and use it as needed for 15 days. Stick mud on the root surface of the moss pan, wet the basin soil, brush it with mud, and then paste it.

[editor's summary]

Moss is a kind of sporophyte, which lives in dark and damp places, and is also a common material for moisturizing bonsai. Often make moss bonsai to make it more beautiful and increase its ornamental value. In this article, the editor of the first Agricultural Classic introduces you the production methods and steps of moss bonsai. I hope it will be helpful to you.