The cutting method of Rose how to do Cuttage Propagation
Roses mostly use cutting propagation, cutting propagation operation is simple, very easy to survive, and after cutting, it can blossom in the same year, the application is very common. The following editor introduces the cutting methods of roses for you!
The cutting method of rose flower:
1. Soil
Rose cuttage flowerpot had better choose the new shallowly tile pot of 20 cm caliber, because of its good air permeability and easy to take root. Or more simply, you can choose a transparent plastic box and wait for the cuttage to be successful before potting.
The soil can be based on a mixture of 20% humus garden soil, 40% horse dung and 40% river sand.
2. Time
It is the best in spring (May) and autumn (October), when the temperature is between 20 and 25 ℃, which is the most suitable for cutting.
3. Preparation before cutting
Before cutting, you should spray the soil in the basin with a spray can the day before, but do not spray too much, which is just slightly moist the next day, which is most suitable for cutting.
The depth of the insert is 3-4 cm. When inserting, first use chopsticks to save a hole in the soil, and then insert the cuttings, compacting them with their hands, so that the potted soil is in full contact with the cuttings, and then pour water once.
4. Cutting method
When cutting, select the strong semi-lignified shoots of the same year as cuttings, and press the knife with extremely tweezers and sharp daughters-in-law.
Section cut 6-10 cm, the incision is required to be smooth and tidy, cut off the lower leaves, leaving only the top 3-4 leaflets.
Buy a vitamin B12 injection, open it, dip the cuttings in the liquid, take it out and dry it for a while.
Maintenance of roses after cuttage:
After inserting, the flowerpot had better be covered with a plastic bag, the mouth of the bag is tied with a belt, open when it needs to be watered, and then re-fastened after pouring.
The cutting flowerpot should be placed in a sunless place, and the cutting pot soil should be sprayed with water every day for 10 days. Except for rainy days, it can be sprayed once in cloudy days and twice in dry weather, but the amount of water sprayed every day should not be too much.
Always pay attention to keeping the soil moist after 10 days. It should be shaded for 4-5 weeks, and only after budding can it be gradually allowed to accept some sunlight. It usually takes about 2 months to take root. After that, all you need is normal maintenance.
[how to cut roses] the method of cutting propagation of roses
Roses, mostly small flowers with vines climbing fences, have strong variability. The flowers and colors of roses are white, red and other colors, and many flower friends are fond of them. Roses mostly use cutting propagation, cutting propagation operation is simple, very easy to survive, and after cutting, it can blossom in the same year, the application is very common.
Rose cutting method 1. Rose cutting soil
Rose cuttage flowerpot had better choose the new shallowly tile pot of 20 cm caliber, because of its good air permeability and easy to take root. Or more simply, you can choose a transparent plastic box and wait for the cuttage to be successful before potting. The soil can be based on a mixture of 20% humus garden soil, 40% horse dung and 40% river sand.
2. The cutting time of roses
It is the best in spring (May) and autumn (October), when the temperature is between 20 and 25 ℃, which is the most suitable for cutting.
3. Prepare the roses before cutting.
Before cutting, you should spray the soil in the basin with a spray can the day before, but do not spray too much, which is just slightly moist the next day, which is most suitable for cutting.
4. When cutting roses
When cutting roses, choose the semi-lignified and sturdy branches of the same year as cuttings, cut 6-10 cm with a very sharp knife, and cut off the lower leaves, leaving only 3-4 leaflets at the top. Buy a vitamin B12 injection, open it, dip the cuttings in the liquid, take it out and dry it for a while. The depth of the insert is 3-4 cm. When inserting, first use chopsticks to save a hole in the soil, and then insert the cuttings, compacting them with their hands, so that the potted soil is in full contact with the cuttings, and then pour water once.
5. Post-cutting management of rose.
After inserting, the flowerpot had better be covered with a plastic bag, the mouth of the bag is tied with a belt, open when it needs to be watered, and then re-fastened after pouring. The cutting flowerpot should be placed in a sunless place, and the cutting pot soil should be sprayed with water every day for 10 days. Except for rainy days, it can be sprayed once in cloudy days and twice in dry weather, but the amount of water sprayed every day should not be too much. Always pay attention to keeping the soil moist after 10 days. It should be shaded for 4-5 weeks, and only after budding can it be gradually allowed to accept some sunlight. It usually takes about 2 months to take root. After that, all you need is normal maintenance.
How to propagate roses, cutting, sowing and propagation methods
How to reproduce the rose, the general rose can be propagated by sowing and cutting, commonly used is the cutting method, the following respectively sort out the rose cutting and sowing propagation methods.
How to propagate rose flowers 1. Methods of cutting propagation
The cutting time of rose flowers can be carried out in all seasons except in summer. The soil for cutting can be prepared first. The soil for cutting can be cut with pure vermiculite or perlite. Of course, ordinary garden soil can also be used.
Then prepare the cutting branches, the branches can choose the disease-free branches of the previous year, and then cut off the branches, the thickness of the branches (0.2cm-.08cm diameter), length (8cm-15cm length), leaving 3-4 nodes, buried 1-2 nodes in the soil.
Roses need shade after cutting, and keep the environment ventilated, and then patiently wait for the branches to take root, which usually takes about 2 months to take root.
2. Seed sowing method
Rose seed sowing time can be carried out in spring and winter, first prepare rose seeds, then soak rose seeds in water for 1-2 days, remove and mix them with 3 times wet sand, and soak them moderately in order to hold sand balls and soak them without water. After that, put the mixed sand seeds into a container, remember to keep them moist, and then put them in a ventilated place for maintenance.
- Prev
Propagation methods of marigold sowing propagation and cutting propagation
Marigold can be cut in summer, which is easy to root and grow into seedlings quickly. Cut 8-12 cm twigs from the mother plant as cuttings, remove the lower leaves, insert them into the basin soil, insert 3 plants in each pot, pour enough water after insertion, slightly shade, and root after 2 weeks. Then, gradually move to a sunny place for daily management.
- Next
Can roses be cultured in water? how can they be cultured in water?
Roses are commonly used for ramet, cuttage and striping propagation, which can be carried out in spring, early summer and early autumn. It can also be sown in autumn or in spring after sand storage, and germinate 1-2 months after sowing. As a common woody plant, rose is a relatively large potted plant.
Related
- Fuxing push coffee new agricultural production and marketing class: lack of small-scale processing plants
- Jujube rice field leisure farm deep ploughing Yilan for five years to create a space for organic food and play
- Nongyu Farm-A trial of organic papaya for brave women with advanced technology
- Four points for attention in the prevention and control of diseases and insect pests of edible fungi
- How to add nutrient solution to Edible Fungi
- Is there any good way to control edible fungus mites?
- Open Inoculation Technology of Edible Fungi
- Is there any clever way to use fertilizer for edible fungus in winter?
- What agents are used to kill the pathogens of edible fungi in the mushroom shed?
- Rapid drying of Edible Fungi