MySheen

Adopt the correct cutting method to blow up the pots of orchid and green apple in one month.

Published: 2024-11-21 Author: mysheen
Last Updated: 2024/11/21, The biggest dream of a flower grower is that any flower can burst into a pot! If you look at it, you can only see the flowers but not the pots! However, not every kind of flower can easily burst the pot, but as long as you learn this kind of cutting method, the pot will burst in minutes ~ 1. Longevity flowers can be cut with leaves or branches.

The biggest dream of a flower grower is that any flower can burst into a pot! If you look at it, you can only see the flowers but not the pots! However, not every kind of flower can easily burst the pot, but as long as you learn this kind of cutting method, the pot will burst in minutes.

1. Longevity flower

Longevity flowers can be cut with leaves or branches. Today, we will mainly introduce how to use leaves to cut longevity flowers.

First of all, the leaves of the cuttings are thick and robust, carefully cut the petiole with scissors and put them in a cool and ventilated place to dry for a while. The substrate of cutting generally does not use soil, this is because longevity flowers are fleshy leaves, cutting with soil is particularly easy to rot.

Cuttings generally choose sand as the substrate, and to ensure that the sand is clean, it is best to wash it. When cutting, the leaves are obliquely inserted into the substrate to cover the petiole.

After cutting, we should pay attention to moisturizing, the leaves take root and sprout very slowly, we must have enough patience. In order to make the plant grow more healthily, we can apply thin liquid fertilizer every two weeks, which can promote flower bud differentiation, and the cutting leaves will soon be full of pots.

2. Douban green

Bean green can also be cut into leaves and branches, and the method of leaf cutting is the same as that of longevity flowers above. The following flowers mainly introduce the method of green branches of bean petals. Similarly, longevity flowers can also be cut in this way.

The best cutting time for Douban green is April and May, when the sturdy branches are cut four or five centimeters, the lower leaves are removed, and the cut is dried to avoid bacterial infection.

The cutting substrate can be mixed with peat soil, garden soil and perlite according to the proportion of 3:1:1, and can be inserted into two or three centimeters of the substrate.

The flowerpot after cutting should be kept in the shade to keep the substrate moist. If possible, the flowerpot can be properly sprayed every day and can take root in about two weeks. After taking root, Douban green can be moved to the place of scattered light for normal maintenance.

3. Buddha beads

The branches of Buddha beads are very easy to sprout and take root, so cutting can also make it burst quickly.

The suitable cutting time of Buddha beads is spring and autumn, but it is not suitable to take root in winter and summer, and the survival rate is low. When cutting, cut the branches of Buddha beads, it is best to have air roots, remove a few beads under the branches to facilitate cutting.

The cutting substrate of Buddha beads can be mixed with peat soil, vermiculite and perlite at the ratio of 1:1:1. Bury half of the cuttings in the substrate and keep them moist, but there can be no stagnant water, and new roots will soon grow.

The Buddha beads after cutting should also be kept in a cool and ventilated place to avoid exposure to the sun, and when the plants slow down and new buds sprout, they can be preserved in a place of scattered light. The growth rate of Buddha beads is very fast, and the oval leaves will soon fall under the flowerpot.

4. Peony hanging orchid

Peony orchid can be cut in spring and autumn, and it is very easy to survive.

Cut off mature branches and dry them for a while.

Choose sandy soil with good drainage, insert cuttings into flowerpots, water thoroughly, and put them in a cool and ventilated place to keep the soil moist. After a few days, you can see the branches stand upright, which means that the branches begin to take root.

After the growth of new branches, it is necessary to ensure sufficient light in order to have flower bud differentiation, lack of light, it is easy to lead to long leaves without flowering. Is there a great sense of achievement in such a full basin?

5. Copper grass

Codonopsis lanceolata is the best ramet plant, as long as there are roots, water, it will not be long, can grow new leaves, and then reasonable maintenance, burst pot is not too simple!

Take the copper grass out of the flowerpot and divide it into two or more parts, as long as each part has a root system.

Plant the divided copper grass in a new flowerpot, pour enough water, put it in a place with plenty of light, and new branches will come out in a few days.

When replanting in separate pots, you can cut off the upper leaves again, so that the newly grown leaves are more rich and beautiful. Copper grass must bask in the sun more, or I'll show you every minute.

6. Green pineapple

If you want to have a big pot of green pineapple quickly, you must learn how to cut it!

First of all, choose semi-lignified green radish branches, the survival rate is high, cut the branches into about ten centimeters of cuttings, retain the upper one or two leaves.

Configure loose sandy soil or vermiculite with good ventilation and drainage, insert the cuttings into the soil about 1/2, pour water thoroughly, so that the cuttings and the substrate can be closely combined.

After cutting, keep the soil moist and high air humidity and put it in the place of scattered light, which is beneficial to the photosynthesis and rooting of the leaves on the cuttings. Generally, cuttings can take root 20 days later, and then you can increase the light to maintain it normally.

7. Hanging orchid

Cymbidium can be cut from spring to autumn, so it is easy to operate.

Select plants that are strong and free of diseases and insect pests, and cut off the stolons of Cymbidium, preferably those with aerial roots below.

Cut the clustered leaves on the stolon, that is, the small orchid plant, from the stolon. The soil of cuttage orchid can be mixed with garden soil and nutritious soil. Pour water thoroughly, put it in a cool place for maintenance, and the basin will soon burst.

Note: don't bury it too deep when cutting, it will easily lead to bad heart of the plant.

Friends know the way to burst the basin, why don't you act quickly. Sit back and wait for the basin to explode!

The green turnip is cut like this, and the pot will burst in one month.

★ green apple ★

Green pineapple, flower growers almost have one pot, so now let's turn it into two pots! There is no flower that can be more simple than green apple cutting. here are the detailed steps.

Step 1: prepare the cutting soil

Generally speaking, the soil is loose, breathable and permeable. Huahua recommends the use of vermiculite or coconut brick soil + perlite.

(photo author: Baoda 1010 Source: green Luo World)

Step 2: cut the cuttings

Ensure that the branches grow healthily and are free from diseases and insect pests.

(photo author: Baoda 1010 Source: green Luo World)

Step 3: branch treatment

Cut the branches into nodes with scissors, keeping a leaf and a bud in each section.

(photo author: Baoda 1010 Source: green Luo World)

Step 4: cuttage

Insert the prepared cuttings into the prepared soil, expose 1/3 of the cuttings, pour water thoroughly, let the cuttings combine closely with the soil, and cover them with plastic bags if possible.

(photo author: Baoda 1010 Source: green Luo World)

Maintenance and management after cutting

After cutting, the soil must be kept moist, and water is often sprayed to the cuttings to maintain high air humidity. The small buds can already be seen.

(photo author: Baoda 1010 Source: green Luo World)

Just cut the flowerpot to pay attention to sunscreen, scattered light, so that the leaves can not only carry out photosynthesis, but also promote the rooting of cuttings.

(photo author: Baoda 1010 Source: green Luo World)

Already grew a lot of new leaves, now you can add enough light to the green pineapple, enhance photosynthesis, and will soon burst the pot.

(photo author: Baoda 1010 Source: green Luo World)

How's it going? Isn't it great?

(photo author: Baoda 1010 Source: green Luo World)

★ hanging orchid ★

Cymbidium can extract new creeping branches from the plant, and the end of each branch is a small plant, which can be cut directly and put into the soil to live.

Step 1: cut the stolon of Cymbidium

(photo by: yaohengrui0710 Source: flower Bar)

Step 2: cut the clustered leaves on the stolon, that is, the small Cymbidium plant, from the stolon.

(photo by: yaohengrui0710 Source: flower Bar)

Prepared cuttings

(photo by: yaohengrui0710 Source: flower Bar)

The soil of cuttage orchid can be mixed with garden soil and nutritious soil.

(photo by: yaohengrui0710 Source: flower Bar)

Step 3: cuttings will be cut into the soil for cultivation.

(photo by: yaohengrui0710 Source: flower Bar)

Step 4: water thoroughly and keep it in a cool place.

(photo by: yaohengrui0710 Source: flower Bar)

Note: don't bury it too deep when cutting, it will easily lead to bad heart of the plant.

(photo by: yaohengrui0710 Source: flower Bar)

★ ★

There is copper grass at home, and wealth is rolling in. Copper grass is loved by people because of the auspicious meaning of Zhaojin Jinbao, and it is easy to maintain. As long as there is enough light and enough water, it can grow luxuriantly. Reproduction is also a minute-by-minute burst rhythm.

The first step: dig out a few coins from the original flowerpot, preferably with a root system, so that it is easy to take root.

(photo author: blue Xiaoya Source: Baidu experience)

Step 2: prepare cuttage containers, cups or flowerpots without holes.

(photo author: blue Xiaoya Source: Baidu experience)

Step 3: in the prepared container, put one third to 1/2 of the soil, the more fertile the soil, the better.

(photo author: blue Xiaoya Source: Baidu experience)

Step 4: plant the prepared copper grass branches into the prepared soil, compacted and fixed.

(photo author: blue Xiaoya Source: Baidu experience)

Step 5: pour water into the flowerpot until it passes through the soil. Be careful not to let the copper grass float.

(photo author: blue Xiaoya Source: Baidu experience)

Next, put the cuttage on the sunny place, the copper grass likes the sun very much, must ensure sufficient light, timely add water to the container, once the lack of water, copper grass will soon wither oh.

(photo author: blue Xiaoya Source: Baidu experience)

As long as the environment is suitable, Codonopsis lanceolata will grow very fast and will soon fill the flowerpot.

★ Buddha bead ★

So how to change Buddha beads into two pots?

Step 1: choose the sturdy branches of Buddha beads and cut out a few sections. It is better to have small protuberances on the sections, as shown below in the red circle.

(photo author: Ermu Source: Sina blog)

Step 2: put the cut beads directly on the sand or other loose medium, then sprinkle a layer of soil on the beads, bury all the stems, and it doesn't matter if the beads are buried.

(photo author: Ermu Source: Sina blog)

Step 3: after planting, properly watered, it will soon take root.

(photo author: Ermu Source: Sina blog)

★ touches incense ★

Touch incense gently with your fingers, you can smell fresh and pleasant fragrance, refreshing, and touch incense can also make tea, cooking, such a good plant, of course, the more the better.

Step 1: cut four or five centimeters of sturdy branches as cuttings.

(photo author: big bowl of mashed potatoes Source: Sina blog)

Step 2: gently remove the leaves from the lower part of the cuttings with tweezers or hands.

(photo author: big bowl of mashed potatoes Source: Sina blog)

The third step: prepare the soil for cutting, loosen and breathable, and can be mixed with vermiculite, perlite, deer marsh soil, nutritious soil and so on.

(photo author: big bowl of mashed potatoes Source: Sina blog)

Step 4: carefully plant the prepared incense cuttings and do not water them immediately after planting, otherwise it is easy to guide the cuttings to rot.

(photo author: big bowl of mashed potatoes Source: Sina blog)

After about two weeks, the cuttings grow new roots, which can be watered and maintained normally.

Flower friends, have you raised all these flowers?

Hurry up and use your flower cuttings.

How to cut potted plants? Common cutting methods of potted plants

Growing flowers can not only beautify the environment, but also add fun to life, so more and more people begin to grow flowers. Of course, the source of flowers is bought by florists, but many florists do so for selfish reasons, causing many friends to react that the flowers bought will not work for long. So what are we going to do? You can cut it yourself! The survival rate of these six kinds of potted plant cuttings is high, and it is very simple. Go to a friend's house and try to break a branch.

Picture: green pineapple

Cutting method of ● green pineapple

1. Choose the sturdy green radish stem vine, cut the stem vine from 15 to 25cm as cuttings, it is best to choose the aerial root, leaving 3 leaves in each section.

2, prepare a large basin, fill the soil, but do not compact, the soil had better choose a better permeability, add vermiculite or perlite is quite good.

3. The air root of the green apple is at the junction of the petiole and the stem. When cutting, the end of the branch is cut down and slanted into the soil to ensure that at least two nodes are inserted into the soil, which is more conducive to the survival of the green apple.

4. Leave the cuttings in a cool place for maintenance, and water them again 2 to 3 days later. Do not water too frequently before survival. Water thoroughly to avoid breaking stems and rotting. After survival, it can be watered normally. Green pineapple likes water. You don't have to wait until the soil is completely dry. As long as the topsoil is dry, it can be watered.

Picture: longevity flower

Cutting method of ● longevity flower

1, longevity flower cuttings selection, cutting branches is not the bigger the better, generally speaking, it is good to keep two or three pairs of leaves.

2. The cut branches of longevity flowers had better be hung for a day before cutting, for direct planting may be infected.

3, the ratio of cutting soil, peat: garden soil: perlite = 6:2:2, if it is a seedling, the best proportion of peat is a little more.

4, the method of cutting, cut it neatly in the container, and then spray the topsoil with a spray can. Then use cling film to increase humidity, leave holes on both sides, optional things, according to their own geographical location, planting ventilation and humidity are very important.

Picture: Douban green

Cutting method of ● Douban Green

The main results are as follows: 1. The terminal bud branches of 5cm were cut as cuttings from April to May.

2. Dry the cut before cutting to avoid infection and improve the success rate of cutting.

3. Choose more breathable soil for cutting, you can use the ratio of peat: garden soil: perlite = 6:2:2.

4. Spray the cuttings and substrate slightly before cutting, and then put the cut Douban green in a dark place for maintenance. As long as the substrate is not too dry, it can take root in about 15 days.

Picture: Buddha beads

Cutting method of ● Buddha beads

1. Choose sturdy branches and cut them according to the root knot of Buddha beads, usually one at a time, and remove several beads for cutting.

2. Peat, vermiculite and perlite can be used in cutting soil.

3. Then put the cutting beads in a dark place for maintenance. Generally, the beads with roots are easier to take root, so it is best to choose such branches.

Picture: peony hanging orchid

Cutting method of ● Peony Cymbidium

1. Generally choose sturdy branches, and then cut them into branches around 10cm to do cuttings.

2. The soil can be chosen to be the same as other flower cutting soil.

3. After watering thoroughly and putting it in a cool place for one day, you can put it in the sun, watering once in the first three days, and then look at the dry and wet of the basin soil and appropriately increase the frequency of watering. She likes water and light, and is easy to live.

Picture: copper money grass

Cutting method of ● Rabdosia chinensis

Codonopsis lanceolata is the best cutting plant, as long as you keep the roots, remove the unwanted leaves, and then throw them into the water or soil, it will not take long for new leaves to grow, and then reasonable maintenance, the pot is not too easy to burst.

 
0