Propagation method of threaded iron watering once a few days

Grain iron, also known as willow iron, is a plant belonging to the tequila family, and it is the longest indoor plant in our daily life at home or in the company. its leaves are relatively large, green and generous, very dignified, and the price is not very expensive. the most important thing is that it can effectively absorb indoor formaldehyde, benzene and other harmful gases. Because of the high quality and low price of threaded iron, many people plant directly with threaded iron cuttings, which is a common method of cultivating plants, as long as they are directly inserted into the soil or water until they take root, which is very convenient and popular.

The propagation method of threaded iron:

1. Threaded iron cutting method

The appropriate time is from March to October. Cuttings bud eyes upward, slightly inclined to insert the box surface, the depth of the cuttings is the cuttings 1max 2mi 2max 3.

2. Post-cutting management

Insert the humidity of the bed. The water content of the cutting substrate should be kept at about 60%, the relative humidity should be kept at 80%-90%, and the moisture should be replenished in time. After about 15 days of callus formation, the amount of water gradually decreased to facilitate rooting, and the air was ventilated for 2 hours every day.

Insert the bed and water it. Immediately after insertion, water was watered once, and the air temperature was kept below the substrate temperature of 3 ℃ 6 ℃. The film or shade net was used to cool and moisturize the cuttings. Generally, the suitable air temperature for cuttings to take root was 20 Mel 25 min. If the temperature exceeds 30 ℃, ventilate and spray water to cool down at noon.

Bed insertion, medication and fertilization. Spray 50% carbendazim 800 times solution or 65% mancozeb in time after insertion, once every 5 days, especially after rain. After the cuttings take root, the times of spraying can be reduced appropriately. After the callus was formed, foliar topdressing was applied once a week, and 0.2%-0.5% urea and potassium dihydrogen phosphate were sprayed in the later stage.

3. Cultivation techniques of cutting seedlings.

After the cuttings grow on the cuttings for 6 months, the cuttings can be transplanted in spring and autumn when the cuttings grow to 15 mi 20 cm. From February to May in spring and from September to October in autumn, plant in places with 60% shade density, 70% shade, water, stone and moss in order to improve the survival rate. It is best to use pincer nail cultivation method, press the root system with steel nails, clean up the root system, retain other moss, increase water content and improve the survival rate.

The threaded iron is watered every few days:

The maintenance method of threaded iron, because our common threaded iron does not have a great demand for water, although its page looks very large, as if it breathes a lot of water, but if you plant threaded iron, it is generally good to water it dry and wet, especially if it is cultivated indoors, it is even more unnecessary to water every day to avoid rootstock rot and plant necrosis. It is best to use spray-like tools for simple water supply, which can be sprayed once every 3 days and irrigated at the page and rhizome, mainly without water exudation.

Some according to the situation can also be watered for 5-7 days or so once watered thoroughly to the following tray until there is water coming out ~ put in a cool and ventilated place, do not expose yourself to the sun, and remove the yellow leaves in time.

The cultivation method and precautions of threaded iron threaded iron is a variety of dragon blood tree, also known as spiral iron, willow iron, Philippine iron, curly leaf iron, twisted iron. So how is threaded iron raised? Is there any good method in breeding? What matters do you need to pay attention to in breeding threaded iron? Please read on with me with questions.

Culture method of threaded iron (basic knowledge):

The best time for reproduction is from February to May in spring and from September to October in autumn.

The best growing soil: imported peat with loose, drained and ventilated peat of 5-40 mm is the best.

Growth humidity requirements: threaded iron likes the environment of high humidity and high temperature

The optimum growth temperature: threaded iron is suitable for growth between 20 and 30 ℃.

The best growth light: thread iron growing in semi-sunny environment

Matters needing attention in culturing threaded iron:

Application of fertilizer: the demand for fertilizer of threaded iron is relatively small, usually irrigated once a half month.

Watering points: the demand for moisture of threaded iron is not very large, generally watering is appropriate to see dry and wet.

Trim essentials: threaded iron generally does not need to be trimmed.

Pot soil replacement: threaded iron for re-used old pots must be soaked in potassium permanganate 1000 times solution for more than half an hour, then rinse with clean water and dry for use.

Main points of propagation: cutting propagation is the main method of threaded iron propagation, and the suitable time is from March to October. Cuttings bud eyes upward, slightly inclined to insert the box surface, the depth of the cuttings is the cuttings 1max 2mi 2max 3.

Pest control: threaded iron is generally free of diseases and insect pests

Experience of cultivating threaded iron:

The maintenance method of threaded iron, because our common threaded iron does not have a great demand for water, although its page looks very large, as if it breathes a lot of water, but if you plant threaded iron, it is generally good to water it dry and wet, especially if it is cultivated indoors, it is even more unnecessary to water every day to avoid rootstock rot and plant necrosis. It is best to use spray-like tools for simple water supply, which can be sprayed once every 3 days and irrigated at the page and rhizome, mainly without water exudation.

Some according to the situation can also be watered for 5-7 days or so once watered thoroughly to the following tray until there is water coming out ~ put in a cool and ventilated place, do not expose yourself to the sun, and remove the yellow leaves in time.

Fertilizer available flower more 20-20-20 water-soluble fertilizer, the growth is slow, the demand for fertilizer is relatively small, just 3-4 months before planting, because the root system is not developed, generally watering flowers once half a month 20-20-20 water-soluble fertilizer 2000 times, if the amount of fertilizer and water is not conducive to growth. If there is a large amount of fertilizer, the new leaves will wrinkle and expand; in the last 4-5 months, the plant growth is larger, and the root system is more developed, generally watering the flowers every half a month with 20-20-20 water-soluble fertilizer 1000 times.

Knowledge expansion of Thread Iron

The flower language of threaded iron; comfortable and peaceful.

The moral of threaded iron: perseverance always leads to good results.

Threaded iron can effectively absorb formaldehyde, benzene and other harmful gases in the room, has a very high ornamental value, and is suitable for hotels, hotels and other places.

1. Does threaded iron blossom?

Does threaded iron blossom? Threaded iron belongs to the flowering variety, and the flowers are white, but it is very rare for threaded iron potted plants to blossom indoors. What we call "ten thousand years of iron trees do not blossom" is the perfect interpretation of threaded iron.

The flower fragrance of threaded iron is rich, the florescence is very short, it will wither in a few hours, the longest flowering time is free for 1 day, the flowering of threaded iron is slightly smaller and shows clusters of buds of 7 to 10 layers, and the flower fragrance is faint, similar to the fragrance of lilac flowers, very rich, but the smell is more pleasant than that of cloves. When the fragrance of flowers comes, you will deeply realize the feeling of the fragrance of flowers.

2. What does the flowering of threaded iron mean?

The flower language of threaded iron means comfort and peace. The flowering of threaded iron means that perseverance will always have a good result. Threaded iron flowering is very rare, so whenever threaded iron blossoms, we will be very surprised. The language of threaded iron and its unique posture give people a sense of upward vigor, vitality and positive progress.

How to transplant threaded iron

Threaded iron belt root transplantation

When transplanting threaded iron, one of them is to transplant with root. To transplant threaded iron with roots, it is best to bring some old soil, which can improve the survival rate of transplantation, and there will be some rhizobium on the roots, which will help the plant to restore growth quickly.

When transplanting with roots, take out the threaded iron plant and transplant it into a new flowerpot.

Threaded iron rootless transplantation

In fact, when transplanting threaded iron, there is still a rootless way of breeding. This kind of transplantation, in fact, is to remove the root system of threaded iron and transplant only part of the plant.

When carrying out breeding, you need to dry the plants without roots for a few days, usually for 2 to 5 days. After drying, the wound of the threaded iron will heal. At this time, you can insert it into the cleaner sand, let it take root, and then transplant it when it grows out of the root.

The threaded iron with new roots can be transplanted into the new nutritious soil. In the initial stage, there is no need to fertilize it, just put it in a sunny place and pour it thoroughly. From then on, if it is not dry or watered, it will be watered thoroughly.

When the threaded iron slowly begins to survive and grows for a period of time, it can slowly return to normal management. Gradually resume fertilization, pay attention to thin application of fertilizer.