When to sow the cuttage method of beautiful cherry

Beauty cherry is a more common family plant, the long flowering period usually lasts from February to November, so the beauty cherry cutting method? When will the seeds be sown?

Cutting method of Beauty Cherry:

1. Cutting time

Cuttings are usually carried out from April to July and the temperature is about 15-20 degrees Celsius.

2 cutting substrate

Cutting substrate to keep water permeable, the average family is very difficult to get the ideal cutting substrate, here we can buy the already configured cutting substrate. You can also use medium and coarse river sand, but you need to rinse with clean water several times before use, and it is best to carry out disinfection. Do not use the river sand in saline-alkali areas, which is not suitable for the growth of flowers and plants.

3. Selection of cutting branches.

Cuttings are generally combined with heart-picking, and top shoots with sturdy, disease-free and robust growth are selected as cuttings.

4. Management after cuttage

Temperature

The rooting temperature of Beautiful Sakura is 18-25 degrees Celsius, and the plant takes root slowly when it is below 18 degrees Celsius. When the temperature is higher than 25 degrees Celsius, the cuttings are susceptible to bacterial infection and rot, and the higher the temperature, the greater the rot. If you encounter low temperature when cutting, you can use film to pick up the cutting flowerpot or container. When the temperature is too high, it should be shaded. Put the cuttings in a cool place and spray them frequently.

Humidity

Be sure to maintain a high air humidity after cutting, and the relative humidity should generally be maintained at 75-80%. You can spray cuttings 1-3 times a day, increase the number of sprays when the temperature is high in sunny days, and spray less or not in cloudy and rainy days. Be careful not to spray too much, cuttings are prone to rot caused by bacteria in the water.

Light

Cutting propagation is inseparable from sunlight, but the stronger the light is, the higher the temperature in the cuttings is, the more exuberant transpiration of cuttings is, and the more water is consumed, which is not conducive to the survival of cuttings. Therefore, after cutting, the sun must be shaded by 50% to 80%, and then gradually removed after the root system grows: remove the sunscreen at 4:00 every sunny day, and cover it before 9:00 the next day.

When will the beautiful Sakura sow?

Beautiful cherries are often sown in autumn in late September.

First, prepare before sowing

1. Disinfect the matrix to prevent bacterial infection. The commonly used disinfection methods are exposure to the sun, or stir-fry the soil in a pan to directly kill diseases and insects.

2. Sprouting: soak the seeds in warm water for three to ten hours until the seeds swell.

Second, sowing seeds

Sow the cherry sakura evenly on the seedling tray, cover the soil for about 1 centimeter, and wet the sowing matrix with a sprayer after sowing. Later, when the basin soil is slightly dry, you should still pay attention to continue watering, watering should not be too strong, so as not to wash up the seeds.

Third, management after sowing

After sowing in autumn, when you encounter a cold wave and low temperature, you can wrap the flowerpot with plastic film to keep warm and wet; after the seedlings are unearthed, the film should be opened in time, and before 9:30 every morning, or let the seedlings receive the sun after 3:30 in the afternoon, otherwise the seedlings will grow very weakly. After most of the seeds come out, they need to plant seedlings properly: pull out the diseased and unhealthy seedlings, so that the seedlings left behind have a certain space between each other; when most of the seedlings grow 3 or more leaves, they can be transplanted into the pot.

All right, friends, you all have a clear understanding, you know that Beautiful Sakura usually sows seeds in September.

Planting method of Beautiful Sakura Cuttage points for attention

Beautiful cherry is also known as five-colored plum, verbena, brocade, four seasons hydrangea, etc., verbena is a perennial herb of Verbenaceae, native to South America, can be used as flower beds, flower border materials, can also be potted flowers planted in a large area suitable for potted viewing or layout of flower platform garden gap, tree beds, let's take a look at the breeding methods of beautiful female cherry!

Growth habits of Beautiful Sakura

Beauty cherry likes sunshine and is not tolerant to shade, cold, shade and drought. In the north, it is cultivated as annual grass flowers and can blossom normally in hot summer. Growing in sunny, loose and fertile soil, flowers bloom. Like warm and humid climate, like the sun, not resistant to drought, not strict requirements on the soil, but in the loose, fertile, more humid neutral soil can take root, grow strong, bloom luxuriantly. You can spend the winter in the open field in the warmer microclimate of Shanghai.

The Propagation method of Sakura

1. Sowing: the germination rate of cherry seeds is low, only about 50%, and the germination is very slow and irregular. It begins to emerge after 2 or 3 weeks at the temperature of 15: 17 ℃. Sowing time is mostly in spring, seeds should be placed in a dark place after sowing, not only to keep the soil moist, but also to keep the air moist, watering can not be directly watered from up to down, apply noodle plates and other containers to hold 3-4 cm deep water, and then soak the flowerpot, let the water invade from the outlet hole of the basin, and take out after the soil is moist, otherwise the germination rate is even lower.

2, cutting: beauty cherry cutting can be carried out in May to June, the temperature is about 15 ℃, first take a little woody branches, cut into 5 '6cm long segments to do cuttings, insert in the wet sand bed, immediately after shading, after 2 to 3 days can be slightly seen in the morning, evening sun, to promote growth, after about two weeks can send out new buds, rooting. The seedlings were transplanted when they had 5-6 true leaves and were planted when they reached 7-8 cm.

Culture methods of Beautiful Sakura

1. Soil: Sakura is not strict with soil, but it can take root, grow healthily and bloom luxuriantly in loose, fertile and moist neutral soil.

2. Watering: the root system of Yinmei cherry is relatively shallow, so we should pay attention to watering in summer to prevent drought. During the maintenance period, too much or too little water is not conducive to growth, too much water, thin and weak stems, reduced flowering, lack of water, poor plant growth and development, there will be the phenomenon of early fruiting.

3. Sunshine: Sakura needs to be maintained in shade in spring, summer and autumn. When the temperature is high, if it is maintained in direct sunlight, the leaves will obviously become smaller, the branches will shorten, the feet will yellowed and fall off, and the growth will be very slow or enter a semi-dormant state.

4. Temperature: Sakura prefers warm climate and avoids extreme heat. It grows poorly when the summer temperature is higher than 34 ℃, is not resistant to frost and cold, and enters dormancy or death when the winter temperature is below 4 ℃. The most suitable growth temperature is 15-25 ℃. Seeds are generally sown in autumn and winter to avoid high temperatures in summer.

5. Fertilization: like other grass flowers, Beautiful Sakura requires more fertilizer and water, but it is required to follow the principle of "light fertilizer applied frequently, less and more times, and complete nutrition". After fertilization, leaves and flowers should be kept dry at night.

6. Pruning: Sakura generally picks the heart twice before flowering to promote the germination of more flowering branches.

How to reproduce beautiful cherry, cuttage, sowing and propagation of beautiful cherry

Beauty can be propagated through sowing and cutting, two ways of reproduction, flower friends can combine their own conditions, choose the appropriate way of reproduction, the following arrangement of beauty cherry sowing and cutting propagation methods.

How to reproduce Sakura 1. Methods of sowing and propagation

The sowing time of beautiful cherry is usually in spring, and it can blossom about July after sowing, but with the sowing method, the seed germination rate of beautiful cherry is low, about 50%, and the germination is slow and irregular. If the temperature is 15-17 ℃, it will only begin to emerge two or three weeks after sowing.

2. Cutting propagation method.

The cutting time of beautiful cherry can be carried out all year round as long as the temperature is suitable, first of all, select the branches that are slightly woody, cut into 5 '6cm long segments as cuttings, insert them in the wet sand bed, and immediately shade them. After 2-3 days, you can see the morning and evening sun slightly to promote growth. After about two weeks, you can send out new buds and take root.

The suitable cutting time for beautiful cherry is November to March of the following year, the survival rate of cutting is as high as 100%, followed by September-October, the survival rate of cutting is 80% 85%, and the survival rate of cutting is lower from May to August, which is 10Mel 25%. According to the observation and mastery in the past year, and combined with its growth characteristics, corresponding measures were taken to select the appropriate cutting time.