How to raise the plant withered and how to do

Cymbidium is a highly ornamental plant, its main ornamental point lies in the leaves, how to raise it? What if the plant withered:

How to raise Chiba orchids:

1. Light. Chiba prefers a semi-shady environment and needs plenty of sunlight in the process of growing. However, it should be noted that if the light is too strong or insufficient, the leaves are easy to fade and turn yellow. Pay attention to shade when the sun is strong in summer so as not to burn the plant. In winter, it should be questioned to keep the light of the worms in order to avoid the lack of light and the color of the leaves.

2. Temperature. Cymbidium likes warm and humid climate and is not resistant to cold. The suitable growth temperature is 20 to 24 ℃. If the temperature is too high, the leaves are easy to turn yellow and dry, so we should pay attention to cooling and ventilation in summer. Winter temperature is low, it is necessary to maintain a certain overwintering temperature, not lower than 5 ℃.

What if the plant of Cymbidium is withered:

1. Caused by high temperature and strong light

If the dry and withered Cymbidium angustifolia is caused by light and heat, the plant can be moved in a semi-shady environment, the withered leaves can be cut off, and water is often sprayed on the leaf surface and the environment, and the new leaves can return to normal.

2. Caused by stagnant water in basin soil

If the dryness and blight is caused by this reason, the solution is mainly from the roots. Remove the soil from the flowerpot, cut off the rotten roots, and replace them with clean, breathable sandy soil. don't spray too much water, wait until the new roots are out, and then replace the fertile culture soil for planting.

3. Failure to change the basin in time

Not changing the basin for a long time has led to this situation, so it is necessary to change the basin in time. Choose a larger flowerpot suitable for further growth, remove the original plant from the pot after some treatment, and then put it back on the pot.

Have you learned the breeding method of Chiba?

What if the plant of Cymbidium is dry and withered?

The causes of dry and withered Cymbidium

The light is strong and the temperature is too high

Chiba likes a warm and humid environment and can withstand semi-overcast. And direct sunlight, high temperature, the most likely to cause Qianye Cymbidium scorched.

If the temperature is too high, the Cymbidium will stop growing, and the light is so strong that it is easy to burn the plants. These two conditions can easily cause the plants of Cymbidium to dry up and wither.

The basin soil is stagnant and the roots rot.

If the basin soil of Chiba is hardened, it is impervious and the drainage is not good. Or too much watering, stagnant water in the basin and poor drainage will lead to the root rot of Chiba. The decay of the roots will reduce the ability of the roots to absorb water, resulting in blackening of the leaf tip, curling and drying up of the leaves.

It is not timely to change the basin.

If the basin is not changed for a long time, the root will not get enough growth space. In the environment of high temperature, high drought or cold weather, it is easy to cause root tip atrophy and necrosis, loss of absorption function, resulting in leaf drying and atrophy.

What about the dry and withered plants of Cymbidium chinensis?

High temperature and strong light cause drying and withering.

If the dry and withered Cymbidium angustifolia is caused by light and heat, the plant can be moved in a semi-shady environment, the withered leaves can be cut off, and water is often sprayed on the leaf surface and the environment, and the new leaves can return to normal.

The accumulation of water in the basin soil leads to drying and withering.

If the dryness and blight is caused by this reason, the solution is mainly from the roots. Remove the soil from the flowerpot, cut off the rotten roots, and replace them with clean, breathable sandy soil. don't spray too much water, wait until the new roots are out, and then replace the fertile culture soil for planting.

Failure to change the basin in time leads to drying and withering.

Not changing the basin for a long time has led to this situation, so it is necessary to change the basin in time. Choose a larger flowerpot suitable for further growth, remove the original plant from the pot after some treatment, and then put it back on the pot.

The solution to the withering and withering of Cymbidium plants

Cymbidium is a potted plant that many people like to breed, which has high ornamental value and is suitable for hanging pot planting or several shelves on high ground. Today, let's take a look at how the plants of Cymbidium are withered, and share with you the solutions to the dryness and withering of Cymbidium.

The causes of dry and withered Cymbidium

1. the light is strong and the temperature is too high

Chiba likes a warm and humid environment and can withstand semi-overcast. And direct sunlight, high temperature, the most likely to cause Qianye Cymbidium scorched.

If the temperature is too high, the Cymbidium will stop growing, and the light is so strong that it is easy to burn the plants. These two conditions can easily cause the plants of Cymbidium to dry up and wither.

2. The basin soil is stagnant and the roots rot.

If the basin soil of Chiba is hardened, it is impervious and the drainage is not good. Or too much watering, stagnant water in the basin and poor drainage will lead to the root rot of Chiba. The decay of the roots will reduce the ability of the roots to absorb water, resulting in blackening of the leaf tip, curling and drying up of the leaves.

3. it is not timely to change the basin.

If the basin is not changed for a long time, the root will not get enough growth space. In the environment of high temperature, high drought or cold weather, it is easy to cause root tip atrophy and necrosis, loss of absorption function, resulting in leaf drying and atrophy.

What about the dry and withered plants of Cymbidium chinensis?

1. High temperature and strong light lead to drying and withering.

If the dry and withered Cymbidium angustifolia is caused by light and heat, the plant can be moved in a semi-shady environment, the withered leaves can be cut off, and water is often sprayed on the leaf surface and the environment, and the new leaves can return to normal.

2. the stagnant water in the basin soil leads to drying and withering.

If the dryness and blight is caused by this reason, the solution is mainly from the roots. Remove the soil from the flowerpot, cut off the rotten roots, and replace them with clean, breathable sandy soil. don't spray too much water, wait until the new roots are out, and then replace the fertile culture soil for planting.

3. Failure to change the basin in time leads to drying and withering.

Not changing the basin for a long time has led to this situation, so it is necessary to change the basin in time. Choose a larger flowerpot suitable for further growth, remove the original plant from the pot after some treatment, and then put it back on the pot.