Cultivation of Gastrodia elata by electromagnetic field

In the practice of cultivating Gastrodia elata, it is found that Gastrodia elata has high quality and high yield in the cultivation area stimulated by nature lightning. According to this phenomenon, the asexual reproduction and cultivation experiment of Gastrodia elata was carried out by simulating natural electromagnetic field, and the high benefit of average yield of Gastrodia elata per square meter was more than 10 kg per square meter, some as high as 20 kg for several years.

Cultivation time and species selection of Gastrodia elata

It is generally cultivated in the hibernating period of Gastrodia elata. That is, it can be cultivated in autumn, winter and spring. However, due to different regional climate, the time of cultivation of Gastrodia elata is also different. The asexual reproduction and cultivation of Gastrodia elata was generally carried out in March in Shandong, Shanxi, Henan and Hebei provinces, and the harvest and transplanting of Gastrodia elata were carried out at the same time. The cultivation of sexual reproduction of Gastrodia elata is generally carried out in May and June.

Selection of asexual reproduction seeds of Gastrodia elata. The degeneration of Gastrodia elata seeds is particularly serious. in recent years, the seeds of asexual reproduction and cultivation of Gastrodia elata in Shandong and other provinces are generally selected as the first generation of excellent Gastrodia elata hybrid between red stalk and green stalk, and more than three generations of Gastrodia elata seeds are eliminated.

The range of Gastrodia elata cultivated by electromagnetic field

Using electromagnetic fields to cultivate Gastrodia elata can be used in mountain areas, plains, barren mountains, barren beaches, urban idle sheds, basements, air-raid shelters, rural front and back houses, cellars, caves, orchards and other places where crops and plants are not growing. Gastrodia elata can be cultivated by electromagnetic fields. As long as we make good use of electromagnetic field technology and control temperature and humidity, we can obtain high quality and high yield.

Preparation of raw materials

General cultivation of 1m2 Gastrodia elata requires 500g of the first generation of Gastrodia elata, 4 bottles of Armillaria mellea with a net weight of 750g per bottle, 20 sticks of fresh hardwood broad-leaved trees with a diameter of 3~10cm and a length of 60cm (about weight in 30kg), clean medium-and coarse-grained river sand 0.25m3, electromagnetic line 10m, farmers within the cultivation of 100m2 need to prepare a small magnetization machine (generally investment per square meter is about 100yuan, net income is about 20000300 yuan).

Cultivation of Gastrodia elata

The cultivation time of Gastrodia elata varies from place to place, and the spring planting of Gastrodia elata in temperate zone is generally carried out in March. When cultivating, first spread the river sand 5cm thick on the ground (if the cement ground is spread river sand 10cm thick), the humidity of the river sand should be 40%, after the river sand is spread out and compacted, dig the bottled Armillaria mellea solid cultivation bacteria out of the bottle and break it into pieces, place 1 wisp of Armillaria mellea in sequence according to the position where the stick is placed, and place a wooden stick on top of 1 wisp of Armillaria mellea to compaction. Armillaria mellea is scattered and sticks are placed in the same way every 5cm. Put an electromagnetic wire on the top of the stick away from the 5cm cultivation border at both ends of the stick, which should be connected with the second layer of Gastrodia elata cultivation layer, and then cover Armillaria mellea with a little coarse-grained river sand. One Gastrodia elata seed is placed on both sides of the stick every 4~5cm (pay special attention to not putting Gastrodia elata seed and Armillaria mellea species together to prevent rot), and one Gastrodia elata seed is also placed on each end of the stick. First sprinkle a small amount of sand, fill between the sticks, and then sprinkle a wisp of Armillaria mellea on the sticks to cover the sticks. Then, cover the thick river sand of 5cm. After the first layer is finished, the second layer is cultivated in the same way, which is also connected with the electromagnetic wire, and finally covered with the medium-coarse-grained river sand of 8~10cm, and 2cm thick leaves or straw are placed on the river sand to facilitate heat preservation and moisturization. An electrified connector is set aside at both ends of the electromagnetic wire.

Daily management of Gastrodia elata

After 20 days of cultivation, Gastrodia elata can be watered once, and then watered every 15 days. When the temperature rises above 27 ℃, watering should be stopped and cooling management should be carried out. Connect the magnetizer to the electromagnetic wire every 9 days, turn on the power switch, and set it to 1.5 volts, 2 volts, 3 volts, 6 volts and 12 volts. According to the development of Gastrodia elata and Armillaria mellea, the electromagnetic field of electromagnetic waves is gradually increased step by step to stimulate the rapid growth of Armillaria mellea and Gastrodia elata. It was determined that the cultivation of Gastrodia elata by electromagnetic field could rapidly activate and accelerate the fission and expansion growth of the molecular structure of Armillaria mellea and Gastrodia elata, thus greatly improving the high quality and high yield of Gastrodia elata. If the temperature and humidity are properly controlled, the cultivation of Gastrodia elata with electromagnetic field can reach more than 20 kg per square meter, which is one of the effective ways to obtain high quality and high yield of Gastrodia elata.