Teach you how to prepare raccoon dog feed

The feed of raccoon dog includes animal feed, plant feed and supplementary feed. The supply and composition of feed have a great influence on the health, reproduction and fur quality of raccoon dogs. In order to carry out science, we must understand the effect of feed nutrients on raccoon dogs in order to prepare and process feed reasonably and correctly, so as to minimize feed consumption and obtain the best economic benefits. Therefore, the processing and preparation of feed is very important.

Through the above-mentioned processed feed, the weight should be strictly checked and weighed, crushed and mixed. Small farms can mix several kinds of feed together; large farms can first grind fish, meat feed, livestock and poultry by-products, then grind grain products and vegetables, and finally add water, vitamins or inorganic salt feed, stir evenly and then feed.

In the process of feed processing, attention should be paid to:

(1) it shall be prepared strictly according to the variety and quantity of feed stipulated in the feed sheet and cannot be changed at will.

(2) the modulation speed should be fast and the processing time should be shortened as much as possible. Each preparation should be completed before the food sharing, not in advance, so as to avoid the loss of nutrients caused by too long time.

(3) accurate proportioning, uniform mixing and moderate concentration. The concentration should be sparse in the breeding period and thicker in the non-breeding period.

(4) vitamins, milk, yeast and other feed must be added before feeding, and should be stirred evenly, so as to prevent the adverse consequences caused by oxidation damage or improper intake when prematurely mixed into the feed.

(5) Feed with large temperature difference between hot and cold and raw and cooked should be placed separately during storage and stirred together when the temperature is close.

(6) the thawed feed should not be stored in the seasoning room for more than 24 hours to prevent the feed from deteriorating for too long.

(7) Feed and water must be hygienic, moldy and deteriorated feed should not be used, and water should be clean and hygienic.

(8) the feed dispensing room should be kept clean and sanitary, the instruments and tools used for processing feed should be cleaned in time, and potassium permanganate or alkali water should be used to disinfect regularly. Hua Shufang, Special products Research Institute, Chinese Academy of Agricultural Sciences