Harvesting and processing of Ganoderma lucidum
1. Harvest and drying
Under normal circumstances, it takes about 20 days from the appearance of the primordium to the maturity of the cap. When the cap fully unfolds and releases a large number of spores, the edge white disappears, the thickening is not obvious, the cover color is red (Ganoderma lucidum) and the color is uniform, it can be harvested at this time.
After harvest, the culture material attached to the base of the stalk was cut off in time, dried in the sun, or dried in the baking room, the temperature was controlled at 55-65 ℃ and baked until the water content of Ganoderma lucidum was about 12%. The water content of fresh Ganoderma lucidum is usually 63%, and the drying rate is generally 40% 45%. Sun-dried or dried Ganoderma lucidum is packed in double-layer bags (one layer of plastic bag and one layer of woven bag) and stored in a dry warehouse and checked at any time to prevent mildew and moth.
2. Deep processing
The dried products of Ganoderma lucidum can be made into various new products according to different uses. For medicinal use, it can be made into syrup, tablets, injections, granules, alcohol and so on. For health food can be made into a variety of beverages, oral liquids, tea bags and so on. For cosmetics can be made into shampoo, beauty cream and so on. For viewing can be made into a variety of bonsai technology. Deep processing requires some supporting equipment and technology, the following only introduces some simple and easy related medicinal and ornamental reprocessing.
(1) preparations for medicinal purposes
Modern medical research has proved that the medicinal value of Ganoderma lucidum has the following aspects:
① can resist the formation of thrombus (can dissolve new thrombus and aging thrombus).
② normalizes blood pressure
③ improves hyperlipidemia
④ prevents arteriosclerosis
⑤ keeps the balance of physical functions such as the central nervous system.
⑥ enhances immunity
⑦ has analgesic effect and can relieve pain caused by cancer or other diseases.
⑧ can delay senility.
The easiest way to use it is to drink 10 grams of Ganoderma lucidum Fort tea every day for 2 months, and good results can be obtained. But as a treatment for all kinds of diseases. Must be made into a variety of preparations, including syrup, tablets, injections and so on. Here is a simple method for preparing tablets:
Remove impurities from Ganoderma lucidum and Ganoderma lucidum root bark, wash, pan-fry twice, each time for 3 hours, take juice and place precipitation for 6-8 hours, filter, concentrate to specific gravity 1.26-1.28 (Baume meter 90-95 ℃ thermal test) of the extract, add appropriate amount of excipients to mix evenly, dry into granules and then press tablets, cover with sugar coating. Each tablet is required to be sugar-coated equivalent to 1 gram of crude drug. This tablet is suitable for neurasthenia and can also be used as an adjuvant treatment for coronary heart disease and chronic tracheitis. The usage is 3 tablets 3 times a day, take it after meals, take 10 days as a course of treatment, generally take two courses of treatment.
(2) the technology of bonsai for viewing
① modeling cultivation
According to the biological characteristics of Ganoderma lucidum, the effect of growth inhibition, promotion and modeling can be achieved by changing the conditions of light, temperature, water, gas and so on. If cultured under the conditions of poor ventilation (0.1% CO2 concentration) and low temperature (< 22 ℃), only the long stalk did not form a cap, and the stalk bifurcated into antlers. If the ventilation is good and the temperature is 25-28 ℃, the elongated stalk will soon grow into a cap, and the shape of the two-layer cap is bred by repeatedly changing the culture conditions according to this characteristic. For example, Ganoderma lucidum fruiting body has strong phototropism, shading on four sides can make the stalk and cover grow vertically, and if unilateral light is used, the stalk and cover can grow in the direction of light, so that various shapes can be achieved according to the need.
② bonsai configuration
The cultivated Ganoderma lucidum can be made into various kinds of Ganoderma lucidum bonsai with different shapes and colorful bonsai by artificial refurbishment and embellishment, together with rocks, sand grains, tree stumps, sun-dried moss, branched lichens, Selaginella officinalis and other unbreakable plants. When preparing bonsai, we should pay attention to the following aspects:
First, the color and layout of Ganoderma lucidum materials and ceramic pots should be coordinated and beautiful. Add Ganoderma lucidum, pine and Ganoderma lucidum as bonsai material, you can choose brown, purple sand ceramic basin, in order to show the effect of simple and elegant, color coordination. If take purple ganoderma lucidum, black ganoderma lucidum as the material, can choose white porcelain basin, with strong contrast color, can highlight the beautiful color and posture of purple ganoderma lucidum.
Second, Ganoderma lucidum materials and accessories should be firmly fixed in the basin. In order to facilitate long-term preservation, Ganoderma lucidum materials and accessories can be fixed in the basin with latex, glass glue or gypsum, and Ganoderma lucidum can be fixed in the basin with quartz sand particles or sand grains as fillers. Ganoderma lucidum can also be interwoven into a net with fine iron wire, and the two are fixed in the basin together. Many Ganoderma lucidum with short or even sessile stalks, such as Ganoderma lucidum, Ganoderma lucidum, Ganoderma lucidum and Ganoderma lucidum, have large caps, which can be flattened and bonded to a shallow basin.
- Prev
Fast-growing thin-mouth mite of edible fungi
Fast-growing acaroid mite (Histiostomaferoniarum) belongs to the genus Tetranychidae. This mite is harmful to mites all over the world, and it is possible to exist and occur in any environment suitable for the growth of edible fungi. The main results are as follows: (1) the fast-growing mite can infect the mushroom strain bottle, reduce the finished product rate, invade the mushroom bed and affect the yield, so it is one of the harmful mites of cultivated mushrooms. When the humidity of the mushroom bed is too low or there is a lack of food, a large number of reddish-brown active dormant bodies are produced, gathered on the surface of the mushroom bed or fruiting body, scattered by the breeze or
- Next
Harvest, processing and use of Ganoderma lucidum
Harvest and processing: Ganoderma lucidum generally takes 50 to 60 days from inoculation to harvest. When the growth stops at the edge of the cap and the brownish red spores grow in the seed layer below the cap, it is clear that the fruiting body is mature and can be harvested at this time. Cut off from the middle of the handle with a knife so that the incision does not break, spread out and dry, or dry at low temperature. If spore powder is collected, clean plastic sheeting or smooth clean paper can be placed under the culture shelf, collected with a board brush, and the spore powder can be dried and stored in a plastic bag for medicinal use. Purpose:
Related
- Fuxing push coffee new agricultural production and marketing class: lack of small-scale processing plants
- Jujube rice field leisure farm deep ploughing Yilan for five years to create a space for organic food and play
- Nongyu Farm-A trial of organic papaya for brave women with advanced technology
- Four points for attention in the prevention and control of diseases and insect pests of edible fungi
- How to add nutrient solution to Edible Fungi
- Is there any good way to control edible fungus mites?
- Open Inoculation Technology of Edible Fungi
- Is there any clever way to use fertilizer for edible fungus in winter?
- What agents are used to kill the pathogens of edible fungi in the mushroom shed?
- Rapid drying of Edible Fungi