How to raise a happiness tree? what if the tree loses its leaves?

The happiness tree has beautiful shape, small and green leaves and whirling shadows. It is a very precious indoor ornamental plant. You can write your wish for happiness into a card and hang it on the tree. Alias: chili tree, elder umbrella, bean tree, Kirin Ziwei, Ping an tree (business name). The Happiness Tree is the representative tree of Hawaii. Because people believe that it can bring happiness, so many people put it on their doorstep.

What if the happiness tree in the north has lost its leaves? There may be two reasons: 1 it may be caused by too much watering and poor ventilation, and the withered and yellow leaf tip is mainly caused by indoor air dryness. The fresh water can be sprayed on the leaves 2 or 3 times a day, which can effectively prevent the withered and yellow leaf tips of the newly drawn leaves.

With regard to the names of happiness trees and peace trees, most of them are named by flower sellers in order to cater to the consumer psychology of consumers and add people's expectations of blessing, wealth and peace according to certain characteristics of the plant.

* Happiness trees like a warm and hot environment, and the suitable temperature for growth is between 20 and 30 degrees Celsius. During the hot summer, when the ambient temperature reaches more than 30 degrees Celsius, it is appropriate to build a shed to shade, increase the environment and foliar spray, or move it to a cool and ventilated place with shade for the summer. At the end of autumn, when the ambient temperature drops to about 10 degrees Celsius, it should be moved to the shed in time. During the overwintering period, it is best to maintain a shed temperature of not less than 8 degrees Celsius, and the lowest temperature shall not be less than 5 degrees Celsius, so as to avoid cold injury or fallen leaves. Family potted plants can be moved to rooms with air conditioners or electric heaters to ensure that the room temperature is not less than 8 degrees Celsius so that they can survive the winter safely.

Happiness tree, shade tolerance, full sunshine, semi-overcast environment. Its seedlings are more shade-tolerant, and a shed should be built to cover the light in summer. Potted happiness trees, in order not to grow too tall, can properly control watering when they produce new shoots in spring to keep the potted soil relatively moist. In addition to keeping the basin soil moist, the potted plants displayed indoors should be sprayed with water 2 to 3 times a day during the high temperature season. Summer and autumn shelved in outdoor conservation of the plant,-must strengthen the plant and the surrounding environment of water spray, to create a cool and humid suitable environment happiness tree leaves touch how to do, happiness tree leaves how to save / change pots

The happiness tree feels good just by its name. After seeing its beautiful plant type and green leaves, I want to raise it even more. In life, the people who raise the happiness tree are very big, but in the process of breeding, many flower friends will encounter the situation of losing their leaves, so what about the leaves of the happiness tree as soon as they touch it? How can the leaves of the happiness tree be saved? In this regard, it is up to the editor to solve everyone's doubts.

First, the leaves of the happiness tree will fall off as soon as you touch them, looking for the cause.

As a beautiful plant, the happiness tree is kept at home by many friends, but many of them often encounter some headache problems, such as the leaves of the happiness tree turn yellow and fall off as soon as they touch it. What's going on? In this regard, we should first examine the reasons for the loss of leaves in the happiness tree.

As far as the editor knows, there are six kinds of situations that will cause the leaves of the happiness tree to fall: improper watering of ①, improper fertilization of ②, temperature of ③, light of ④, humidity of ⑤, and ⑥ worm. Next, the editor will tell you how to save the leaves of the happiness tree.

Second, how to save the leaves of the happiness tree

1. Improper watering

Watering is essential in the cultivation of happiness trees, but it is troublesome for many beginners. Because the happiness tree likes the wet environment, but the novice often loses its leaves because it is out of control. There are two situations about improper watering: one is too much watering, the other is too little watering.

Too much watering: the soil is in a moist state for a long time, when the oxygen content of the soil will decrease, and in serious cases, the roots of the tree will not be able to absorb oxygen and nutrients normally, and then the leaves of the tree will fall off as soon as it is touched. Solution: immediately reduce watering and often loosen the soil to make the soil well ventilated.

Too little watering: the root of the happiness tree is not fully absorbed, which can easily cause the leaves to be dull and dull and fall off as soon as they are touched. Its performance is as follows: the lower old leaves are aging, and gradually wither and yellow and fall off from the bottom up. Solution: need a small amount of watering, make it gradually recover and then transfer to normal watering.

2. Improper fertilization

In addition to improper watering, improper fertilization will also lead to the loss of happiness tree leaves. With regard to improper fertilization, there are also two situations: one is excessive fertilization, the other is too little fertilization.

Excessive fertilization: the new leaves absorb enough nutrients, grow thick, and the surface is uneven, while the old leaves are difficult to absorb nutrients, resulting in dry tip scorched yellow shedding. Solution: stop fertilizing immediately, and increase the amount of water, dilute the fertilizer in the basin, or simply change the pot soil directly to make the rich trees refreshing again.

Too little fertilization: if it is not fertilized or changed for a long time, the soil will lack nutrients, causing the happiness tree leaves to fall off as soon as they are touched. Solution: replace it with new loose and fertile culture soil and apply thin compound flower fertilizer.

3. Temperature reason

The happiness tree likes the warm environment, and the best growth temperature is 22-28 ℃. In the hot season, once the temperature exceeds 30 ℃, the growth of the happiness tree will be affected, and its leaves will fall off as soon as the time is long, while in winter, once the temperature is below 5 ℃, the happiness tree will lose its leaves as soon as it is touched.

Solution: how to save the leaves of the happiness tree? If the temperature is too high, we should spray water on the leaves as much as possible, lower the temperature, or move it to a cool and ventilated place with shade for the summer; if the temperature is too low, you can move the plant to a room with air conditioner or electric heater to ensure that the room temperature is not less than 8 ℃, so that it can survive the winter safely.

4. Lighting reasons

The leaves of the happiness tree fall off as soon as they are touched, in addition to water and fertilizer, the light can not be ignored. If the loss of leaves is caused by light, there are also two situations: one is that the light is too strong, and the other is that there is too little light.

The light is too strong: the happiness tree is a light-loving plant, and it can also tolerate shade slightly, either in full sunshine or in semi-overcast environment. But once let it bask in the sun, it is very easy to cause young leaf tip and leaf edge scorched, or leaf yellow shedding. Solution: move the happiness tree to a well-ventilated shady place in time and pour a small amount of water.

Too little light: the light is too strong, but if you leave the happiness tree in a dimly lit room for a long time, the chlorophyll in the leaves will decrease, and over time, the leaves will turn yellow and detach. Solution: it's simple, just increase the lighting time.

5. Humidity problem

During the cultivation of the happiness tree, it is also important to maintain the humidity of the air around the plant. Once the air is dry, the leaf tip of the happiness tree often dries up and falls off.

Solution: how to save the leaves of the happiness tree? At this time, we should pay attention to water spraying, plastic film cover and other methods to increase air humidity to keep it at 70-80%.

6. The cause of the worm

In the process of maintaining the happiness tree, it will be disturbed by diseases and insect pests if it is not operated properly. When it suffers from leaf spot disease, its leaves will be locally necrotic, yellow spots or patches will appear, and in severe cases, the whole leaves will wither and fall off. In addition, when the happiness tree is harmed by shell insects, its leaves are also in danger of falling.

Solution: find out which kind of diseases and insect pests, and then spray the corresponding agents, as for what to spray, there is a detailed introduction in the prevention and control of diseases and insect pests in the happiness tree, so I won't say much here.

The leaves of the happiness tree will fall off as soon as they are touched. After reading the above content, we should know what to do after we meet again. In fact, the loss of leaves is caused by one reason, but it is often caused by a variety of factors, so when we encounter this situation, we must make a correct diagnosis, so that we can prescribe the right medicine to the case.

How to cultivate a potted happiness tree? what about the yellowing leaves of the happiness tree?

The happiness tree, also known as pepper tree, bean tree, bean tree, etc., is a small tree of the Liriodendron family, which is often made into small and medium-sized potted plants, which can be placed in balconies, bedrooms, hallways, etc., with luxuriant and vibrant leaves. It can be used as a thriving ornamental plant to bring happiness to people. Let's take a look at how to raise potted happiness trees.

The growth habit of Happiness Tree

Happiness tree is native to Taiwan, Guangdong, Hainan, Guangxi, Guizhou, Yunnan and other places, as well as India, Philippines, Bhutan and other countries. Sex like high temperature, humid, sunny environment, high temperature, fear of cold, should be moist, avoid drying, born in valley or flat sparse forest, cultivation should be loose, fertile, good drainage, rich in organic matter loam and sandy loam.

The breeding method of Happiness Tree

1. Sowing: the happiness tree can collect long striped capsules at the end of December when the capsule is close to cracking and the seeds are fully mature, dry and remove the winged seeds, rub them, remove the fragments of membranous seed wings, and store them for sowing in the coming spring. It is usually soaked for 3 to 4 hours between March and April, then it is slightly spread out after it is removed, then mixed with sand and scattered on the made seedling bed, lightly covered with thin soil and covered with thin film to moisturize. After the seeds emerge, the film is removed and shaded in a shading shed.

2. Cuttage: when the ambient temperature is about 15 ℃ from March to April, Happiness Tree cut 1-2-year-old lignified branches, about 15 cm to 20 cm long, delete all leaves, the lower incision is best located at 0.5cm below the node, and cut it on the sandy soil seedling bed. The depth of cuttings is about 1x3 to 1lap2 of ear length. During the period of undercutting, healing and rooting, water should be sprayed to keep the seedbed moist. After the intact root system is grown, the soil mass can be transplanted into the pot.

3. Striping: the happiness tree can be skinned annularly under the nodes of 2-year-old strong branches or stems from March to April. The peeling width is generally 2 to 3 times the diameter of the pressed stem. Tie up a 15 × 20 cm plastic film under the ring peeling mouth and tie it against the thick trunk to prevent the droop from being broken by the wind. At the end of autumn, after the ring peeling mouth grew a better root system, it was cut off from the mother plant and planted in a pot.

How to raise a potted happiness tree?

1. Soil: when a happiness tree is growing, soil is equally important. Choose soil that is loose, breathable, well drained and nutritious. It is usually prepared with the ratio of garden soil: rotten leaf soil: rotten organic fertilizer: River sand = 5 to ensure that the roots are always in a good permeable state. If it is found that there is stagnant water in the basin, it should be removed as soon as possible, and the basin soil should be turned over and changed after the basin soil is dried.

2. Temperature: the Happiness Tree likes a warm and humid environment, and temperature is the most important. The temperature is controlled between 19-21 ℃ during the day and 18-20 ℃ at night. Try to keep the temperature below 27 ℃ in hot summer. When the ambient temperature is very high, it is necessary to use a shed for shade. When in winter, the temperature should not be less than 8 degrees and the humidity should not be less than 5 degrees, otherwise the temperature will be frostbitten.

3. Humidity: the happiness tree likes to be moist to the soil environment and indoor environment, and the indoor humidity is controlled between 70 and 80%. The humidity can not be controlled in the large banquet hall, spray the leaf surface once in the morning and evening, if the humidity is too low or in a dry environment for a long time, the leaves will curl and turn yellow, affecting the ornamental.

4. Lighting: happiness trees are very important in lighting. They like to grow in a semi-shady environment. If they are generally raised indoors in the north, there is no problem of direct sunlight. I am afraid that if I keep it in a dark place for a long time, where both direct and scattered light can not be illuminated, when the time is long, the leaves will fall off. So winter should be placed on the balcony or sunny window to enrich the light.

5. Watering: potted happiness trees should be watered every 3 to 4 days in summer, but it also depends on individual conditions. In winter, the happiness tree almost stops growing indoors in the north, and watering should be controlled in the basin soil. Water it thoroughly. If you don't water it, you can't pour a drop of water into the basin. This is the principle, please remember.

6. Pruning: the purpose of happiness tree breeding is to watch and set off the indoor environment. If the tree does not look like it, it is not beautiful. Therefore, it should be pruned attentively. It can generally be pruned in accordance with the natural growth direction of the happiness tree. It can also be trimmed into mushroom shape or round pile shape, and some old and yellow leaves can be cut off at the same time.

7. Fertilization: pot cultivation of happiness trees should not only require proper amount of rotten cake fertilizer and 3% multi-component compound fertilizer to be added to the culture soil, but also be given topdressing continuously. Quick-acting liquid fertilizer can be applied once a month during the growing season, and rotten cake fertilizer and water can usually be used. A small number of potted plants in the family or large potted plants displayed in public places for a long time can be regularly buried with a small amount of multi-component slow-release compound fertilizer particles, or 0.2% urea and 0.1% potassium dihydrogen phosphate can be used.

8. Diseases and pests: the pests on the happy tree are generally shell insects, mites and aphids, which are killed by scale, parathion, zinc parathion, omethoate and dimethoate. As long as it is ventilated and ventilated frequently, there will be no pests in general. The disease resistance of Happiness Tree is still very strong, and diseases are usually rare.

What if the leaves of the happiness tree turn yellow?

1. Metabolism: the growth of the happiness tree is metabolized all the time, and there will be withered and yellow leaves that die of old age, which can be cut directly into yellow leaves without special maintenance.

2. Rootless: if the happiness tree is just bought, it may be caused by the fact that the happiness tree has no roots, it can be dealt with according to the actual situation, return or rest the happiness tree to wait for it to sprout new roots.

3. Abrupt change of environment: if the temperature, humidity and light suddenly change too much, or if the leaves turn yellow caused by the root injury in the pot, measures can be taken to reduce the degree of environmental change and wait for the happiness tree to adapt.

4. Improper watering: if too much watering, root respiration is blocked or even rotted, affecting absorption, resulting in a large number of yellow leaves. Pay attention to watering at this time, do not wait for the soil to dry before watering, watering thoroughly, the frequency should not be fixed for a long time.

5. Air dryness: if it is caused by poor indoor ventilation and ventilation, the leaf tip will be withered and yellow. At this time, indoor ventilation can be increased, and appropriate water spraying can also increase indoor humidity.

6. Lack of light: if the environment in which the plant is located is too dark, it is caused by insufficient light. At this time, you can give the happiness tree plenty of sunshine, but you should avoid exposure.

7. Excessive fertilization: whether the amount of fertilization is too large, whether the organic fertilizer is rotten, and so on. At this time, you can dilute the fertility by flushing the basin soil, but be careful not to turn it into stagnant water.