Culture methods and matters needing attention of threaded iron

1. Pot production standard: 14 cm pot, height 35 cm, crown width about 40 cm, listing period 7-8 months.

2. Matrix preparation: add □ peat with loose, drained and ventilated 5-40mm Pinnell peat and mix the peat with water. (standard of adding water: after mixing well with water, hold the peat tightly and seep water from the fingers) to be planted in the cup. The amount of peat in a 14 cm basin is about 400 ml per basin-a package of 300 liters of □ peat can hold about 750 cups.

3. Requirements for potting seedlings: select high-quality seedlings produced professionally, with a height of 11 cm, a crown width of 7-8 cm, no diseases and insect pests, no withered leaves or yellow leaves.

4. Upper cup: for the old basin that is re-used, it must be soaked in potassium permanganate 1000 times solution for more than half an hour, then rinse with clean water and dry for use. Use a basin with a □ diameter of 14 cm. When planting, put about 2 cm substrate at the bottom of the cup, and then move the sieve seedlings into the cup. The seedlings should not be planted too deep, and the base of the flat plant should be suitable; the matrix should be moderate and filled until the cup is 9 minutes full.

Daily maintenance: the demand for water is not very great,-watering is appropriate to see dry and wet; fertilizer available 20-20-20 water-soluble fertilizer, Jinxin Yemeni iron grows slowly, the demand for fertilizer is relatively small, just 3-4 months before planting due to underdeveloped roots,-like half a month watering-secondary flowers as much as 20-20-20 water-soluble fertilizer 2000 times, if a large amount of fertilizer is not conducive to Jinxin Yemeni iron growth. If there is a large amount of fertilizer, the new leaves will wrinkle and expand; in the last 4-5 months, the plant growth is larger, and the root system is more developed, such as watering for half a month and more than 20-20-20 water-soluble fertilizer 1000 times for secondary flowers.

Culture method of threaded iron (basic knowledge):

The best time for reproduction is from February to May in spring and from September to October in autumn.

The best growing soil: imported peat with loose, drained and ventilated peat of 5-40 mm is the best.

Growth humidity requirements: threaded iron likes the environment of high humidity and high temperature

The optimum growth temperature: threaded iron is suitable for growth between 20 and 30 ℃.

The best growth light: thread iron growing in semi-sunny environment

Matters needing attention in culturing threaded iron:

Application of fertilizer: the demand for fertilizer of threaded iron is relatively small, usually irrigated once a half month.

Watering points: the demand for moisture of threaded iron is not very large, generally watering is appropriate to see dry and wet.

Trim essentials: threaded iron generally does not need to be trimmed.

Pot soil replacement: threaded iron for re-used old pots must be soaked in potassium permanganate 1000 times solution for more than half an hour, then rinse with clean water and dry for use.

Main points of propagation: cutting propagation is the main method of threaded iron propagation, and the suitable time is from March to October. Cuttings bud eyes upward, slightly inclined to insert the box surface, the depth of the cuttings is the cuttings 1max 2mi 2max 3.

Pest control: threaded iron is generally free of diseases and insect pests

Experience of cultivating threaded iron:

The maintenance method of threaded iron, because our common threaded iron does not have a great demand for water, although its page looks very large, as if it breathes a lot of water, but if you plant threaded iron, it is generally good to water it dry and wet, especially if it is cultivated indoors, it is even more unnecessary to water every day to avoid rootstock rot and plant necrosis. It is best to use spray-like tools for simple water supply, which can be sprayed once every 3 days and irrigated at the page and rhizome, mainly without water exudation.

Some according to the situation can also be watered for 5-7 days or so once watered thoroughly to the following tray until there is water coming out ~ put in a cool and ventilated place, do not expose yourself to the sun, and remove the yellow leaves in time.

Fertilizer available flower more 20-20-20 water-soluble fertilizer, the growth is slow, the demand for fertilizer is relatively small, just 3-4 months before planting, because the root system is not developed, generally watering flowers once half a month 20-20-20 water-soluble fertilizer 2000 times, if the amount of fertilizer and water is not conducive to growth. If there is a large amount of fertilizer, the new leaves will wrinkle and expand; in the last 4-5 months, the plant growth is larger, and the root system is more developed, generally watering the flowers every half a month with 20-20-20 water-soluble fertilizer 1000 times.

Knowledge expansion of Thread Iron

The flower language of threaded iron; comfortable and peaceful.

The moral of threaded iron: perseverance always leads to good results.

Threaded iron can effectively absorb formaldehyde, benzene and other harmful gases in the room, has a very high ornamental value, and is suitable for hotels, hotels and other places.

1. Does threaded iron blossom?

Does threaded iron blossom? Threaded iron belongs to the flowering variety, and the flowers are white, but it is very rare for threaded iron potted plants to blossom indoors. What we call "ten thousand years of iron trees do not blossom" is the perfect interpretation of threaded iron.

The flower fragrance of threaded iron is rich, the florescence is very short, it will wither in a few hours, the longest flowering time is free for 1 day, the flowering of threaded iron is slightly smaller and shows clusters of buds of 7 to 10 layers, and the flower fragrance is faint, similar to the fragrance of lilac flowers, very rich, but the smell is more pleasant than that of cloves. When the fragrance of flowers comes, you will deeply realize the feeling of the fragrance of flowers.

2. What does the flowering of threaded iron mean?

The flower language of threaded iron means comfort and peace. The flowering of threaded iron means that perseverance will always have a good result. Threaded iron flowering is very rare, so whenever threaded iron blossoms, we will be very surprised. The language of threaded iron and its unique posture give people a sense of upward vigor, vitality and positive progress.

Talking about the culture method and matters needing attention of threaded iron

Threaded iron, also known as spiral iron, willow iron, Philippine iron, curly leaf iron, twisted iron, can absorb harmful volatiles such as indoor formaldehyde, has poor requirements for moisture and fertilizer, and generally has no diseases and insect pests, so it is loved by the majority of flower friends. today, the editor will briefly talk about the breeding methods and matters needing attention of threaded iron. I hope it can be helpful to everyone.

I. Culture methods of threaded iron

1. The best time to reproduce

Spring is from February to May and autumn is from September to October.

2. The best growing soil.

Imported peat of Pinnacle 5-40mm specification with loose and permeable soil and good drainage is preferred.

3. Growth humidity requirements

Threaded iron likes the planting environment of high temperature and high humidity.

4. The best growth temperature

The optimum growth temperature is in the range of 20-30 degrees.

5. The best growth light

The best growth light environment: half-day overcast environment.

2. Matters needing attention in cultivating threaded iron:

1. Spread fertilizer

Threaded iron is not in great demand for fertilizer, so you can apply fertilizer about once every other month (Huaduo 20-20-20 water-soluble fertilizer can be applied).

2. Watering key points

The water demand of threaded iron is not very large, generally watering is better to see dry and wet, and it can also be watered every 5-7 days or so according to the specific situation.

3. Pruning essentials

Threaded iron generally does not need to be trimmed.

4. Replacement of basin soil

If you are using an old basin, you need to soak it with potassium permanganate 1000 times solution for more than half an hour, then rinse it with clean water and wait for the soil to be changed after drying.

5. Main points of reproduction

The propagation method of threaded iron: mainly by cutting propagation.

The suitable time for cutting propagation of threaded iron is from March to October.

Cutting method: when cutting, the bud eyes are facing up, with a slight inclination, and the insertion depth is 1/2 to 2/3 of the cuttings.

6. Disease and pest control

Threaded iron is generally disease-free.