How to thicken the bonsai root of honeysuckle, trim the twigs and leave the trunk (additional fertilization and less watering)

Honeysuckle is a common potted plant in life, honeysuckle is very easy to raise, but if you want honeysuckle to bloom all over the branches, then you must find a way to thicken the roots. How does honeysuckle bonsai root become thick? This is related to the usual breeding methods and pruning. Before honeysuckle grows tall, you can prune the thin branches of honeysuckle and leave only the trunk.

1. How to thicken the roots of honeysuckle bonsai, trim and fertilize

Honeysuckle light flower by people's favorite, before we said how to raise honeysuckle, honeysuckle efficacy and role, now we understand how to thicken the roots of honeysuckle bonsai. It is very important for honeysuckle roots to thicken. If honeysuckle roots are long and thick, fertilization and pruning must be indispensable.

II. Method of root length and thickness of honeysuckle

1, pruning

To excessive long, affect the ornamental technology strip to timely pruning, constantly on the lateral branches to pick the core, control the climbing of branches, so conducive to the growth of the trunk. 6? After flowering in July, cut short the flowering branches and keep the tree shape. Usually keep basin soil moist, 1 month fertilizer, second thin fertilizer, winter no fertilizer.

2. Re-cut

How does honeysuckle bonsai root thicken? You must learn to cut. Re-cutting is also called re-cutting. There are two concepts. On the one hand, when honeysuckle sprouts and turns green in early spring, the branches cut in winter will be re-examined and trimmed once again. This pruning should be completed in a short time. On the other hand, it is necessary to cut off all the strong branches, prosperous branches and dense branches of honeysuckle in full bloom.

Honeysuckle flower bloom using "four cut four stay" pruning practices, that is, stay back branches, back buds, thick branches, full buds. Cut off downward branches, downward buds, thin buds, thin buds, and remove all buds sprouting from the trunk and root base of honeysuckle to reduce nutrient consumption. This pruning can increase the yield of honeysuckle by about 30%, which is helpful for root thickening.

3. Fertilization

Do not use chemical fertilizer, to use organic fertilizer, the simplest is to directly bean cake, cottonseed cake, rapeseed cake, peanut cake buried in the basin around, not too much at a time, buried on the water.

This can be a long time do not have to worry about fertilizer supply, each time in the above soil not too much, so continue, until the effect of tree roots exposed to meet the requirements, finally will form a basin: packing exposed claws, strong and unyielding.

III. Precautions

No matter what kind of pruning method, when cutting, it should be vertical to the branches without inclined plane, so as not to hurt the stem and bud. When cutting short branches, the cutting position should not be close to the bud eye, but should be cut at the 2-3 cm position of the bud eye or the middle part of the two bud eyes, so as not to hurt the bud, dry bud or dead bud.

Honeysuckle growth temperature of 20-30℃, growth needs sufficient light, summer should also pay attention to shade. Honeysuckle can no longer shade, too dry and too wet, ponding place culture; plum rain season pay attention to drainage. The above is how honeysuckle bonsai root thickening method, I hope to help everyone.

How to make a flower pot, flower pot picture

❤

The flowering period of honeysuckle is from May to October every year. The color of the flower is white at the beginning, but it turns golden yellow after 3 days, and it can also send out a burst of fragrance. The ornamental value of honeysuckle bonsai placed indoors is also very high. Her vines entwined. Ling winter does not tune, winter leaves slightly red. Old honeysuckle making bonsai his rattan droop, posture classical, really do not have a flavor. The following small series will take you to see how to make honeysuckle bonsai.

Flower bonsai picture [Flower bonsai production process]

Step 1: Control water and fertilizer. Honeysuckle potted plants must limit vine growth, control tree shape, and increase flower volume. Spring shelter from rain, reduce watering, prevent excessive growth, promote stem aging, internode shortening, plant dwarf. Before flower bud formation, little or no nitrogen fertilizer was applied, and phosphorus and potassium fertilizer were applied to promote flower bud formation and increase flower amount. Step 2: Change pots at appropriate times. General potted flowers change pots once a year or two, honeysuckle bonsai change pots once every three or four years. Due to the small number of pot changes, the absorption function of roots is weakened, the aging of plants is promoted, the excessive growth is inhibited, the tree vigor is relaxed, the stem tendrils are thick, the internodes are dense, the plant shape is dwarfed, and the flowers are luxuriant.

The third step: growth inhibitor shoot control. When honeysuckle shoots sprout about 5 cm, spray or irrigate with 700 to 1000ppm paclobutrazol, or 2000 to 4000 ppmb9, or 1000 to 2000ppm chlormequat for several consecutive times to inhibit stem growth and tree dwarfing. Step 4: Dwarfing, shaping and pruning. Dwarfing, shaping and pruning were carried out from the top pot planting, and thick stems and short branches were cultivated. During the growth period, vigorous buds are removed and strong branches are picked early. Through shaping and pruning, the vine twining type was transformed into short shrub type with short branches, uniform branches and dense planting and obvious layers. Therefore, honeysuckle bonsai should be placed in a sunny place, it is best to have direct sunlight all day, promote the branches to be short and thick, the leaves to flourish, and prolong the flowering period.

Honeysuckle Bonsai Picture [Honeysuckle Bonsai Production Notes]

Honeysuckle belongs to the root system is relatively developed to, his adaptability is also relatively strong. The requirements for soil are not very strict and it is easier to survive. Honeysuckle potted plants are almost free of any disease. Like warm and humid climate, like sunshine. Sufficient sunlight can make honeysuckle grow more luxuriant, plant robust. The branches of honeysuckle are relatively large, so it is very suitable for making honeysuckle bonsai.

Honeysuckle bonsai picture conclusion: honeysuckle branches larger, although dry vigorous simple, but the branches are very fragile, easy to break, rot, larger branches, do not easily change its shape and angle, so can not be like making other miscellaneous bonsai, to twist the trunk, the shape of the main branch angle. The price of honeysuckle bonsai is not very expensive. Usually around $30-$80. The above is the honeysuckle bonsai related content introduced by this issue. If you still want to know more about honeysuckle, please continue to pay attention to the decoration information of hungry people.

How to make a flower pot, flower pot picture

Honeysuckle can not only be used as a medicinal plant but also as an ornamental plant. Since the flower is white in the early stage of honeysuckle flower and later turns yellow, it will be named honeysuckle. Honeysuckle flowers, March flowering, five out, slightly fragrant, red pedicel, flowers are white, after one or two days is yellow, so named honeysuckle. Also because of a peduncle two flowers, two stamens outside, in pairs, inseparable, like male and female company, but also like mandarin duck dance, so there are mandarin duck vine said. So how does the honeysuckle bonsai have to be made? While enjoying the honeysuckle pictures, learn how to make its bonsai.

The adaptability of honeysuckle is very strong, it likes sunlight and can withstand shade and cold, of course, it is also able to withstand drought and moisture, and the requirements for soil are also lax, but it is best to grow on fertile moist and deep sandy loam. Spring and summer of the year can be two times hair tip.

* Honeysuckle picture appreciation 2 because honeysuckle roots dense and developed, sprout strong, stem vine landing that can take root. Likes sunlight and mild, moist environment, strong vitality, adaptability, cold, drought, in the shade, poor growth. Born in hillside scrub or sparse forest, rubble, mountain foot roadside and village fence edge, up to 1500 meters above sea level.

The medicinal value of honeysuckle has been extensive and famous since ancient times. Its main effects are clearing heat and detoxifying and treating fever. After honeysuckle vine is boiled in water, it has a certain therapeutic effect on skin itching such as eczema in children. It has an inhibitory effect on various pathogenic bacteria and viruses of livestock and poultry. If a certain dose of honeysuckle vine leaf (honeysuckle vine) powder or boiled water can be added in the process of animal feeding, it can prevent and treat animal fever, wind-heat cold, Throat inflammation, pneumonia, dysentery, swollen ulcer, erysipelas, cellulitis and other diseases have a very good role.

* honeysuckle bonsai how to make stumps plus shape should be based on the material six Italy, based on the material of the arts. Honeysuckle is generally suitable for root-lifting bonsai, which can be planted with exposed roots at the time of pot planting; or 3~6cm of roots can be lifted year by year when turning over pots; stumps planted in deep pots for many years can also be removed from pot soil at the same time. Do not break soil lumps and hurt root systems. Change to shallow pots slightly larger than deep pots for planting. Fill nutrient soil in the gaps around them. After the piers are solid, wash off the soil between the root systems above the pot surface with taps, and cut off excess hairy roots after exposing the root systems. Honeysuckle bonsai modeling to cliff-based or pendant-based, so that its natural dynamic posture vividly displayed. Because of its stem tendrils with left entanglement, its branches can also be curved dry shape, using the method of pruning, but should avoid too many times of pruning within a year, otherwise it will affect the formation of buds. For branches that are not in place, appropriate iron wire can be used to tie and pull them. After the branches turn lignification and set shape, the iron wire should be removed in time. The modeling adopts natural style, so that the branches on the pile follow its nature, droop smoothly, and the density of branches and leaves is caused; and the blank is reasonably used to make it rich in painting meaning and increase artistic beauty.