How to raise the root of snow pot planting in June, learn 5 tricks to make June snow beautiful / idea is the key

June snow, also known as Gypsophila paniculata, although its small plants and leaves are sparse, is a good target for bonsai, especially the most suitable for root-raising tree species. What is root? That is, the roots of the plants are exposed to increase the ornamental effect. How can the June Snow potted plant be rooted? The following is a summary of the five strokes, very simple, you can learn to see oh ~

1. How to raise the root of June snow potted plants, intention is the key

June snow root, easy to say, but it is quite difficult to do. Of course, the difficulty was not the method, but the difficulty of making June Snow bonsai look good! So June snow potted plant how to root, intention is the key, to think of a good shape in the heart first, then root. However, before understanding the root extraction method of June Snow Bonsai, let's first look at a common root extraction method in life:

Deep pot and high planting soil and root extraction method

Prepare a deep pot and plant stumps in it so that the taproots and lateral roots rise above the pot surface. Then, the soil around the root is formed into a steamed bun shape, so that the root is not exposed. After a year, topsoil is removed, and then another layer is removed every six months to a year until the roots gradually emerge from the soil. After 2-3 years, combined with pot turning, the roots are lifted upward year by year to make the roots bare.

Second, June snow bonsai root extraction method

Material: Surviving stumps

1. Turn over the basin

In spring and autumn, take out the June snow plant. Method: Put the flowerpot on the side and pat it properly, so that the whole plant can be easily taken out. Then clean up the soil, exposing the roots, need to pay attention to is, stick to the root part of the soil retained, do not remove, conducive to root extraction.

2, idea, sketch

June snow potted plants how to root, intention is very important. First of all, we have to carefully observe the growth characteristics of the roots of June snow, and then in the mind of the idea, determine the shape and then do processing.

Xiaobian Tip: In order to improve efficiency, you can draw a good sketch first, and then follow the map, which will get twice the result with half the effort.

3. Root pruning

When the overall shape is well conceived, it is time to start pruning the roots. First of all, keep thick roots, dead roots or weak roots to be removed in time. Then according to the sketch, use brown wire to bind, or bind or combine or connect or divide, and then block with stones appropriately to achieve satisfactory results. June snow bonsai root extraction method China, root pruning to be simple and clear, can highlight the main body is wonderful.

4. Upper basin

Flower pot: In June snow bonsai root extraction method, select flower pot is also very necessary. Everyone had better use purple sand basin, the color should not be too bright, to avoid overtaking the host.

Basin soil: According to the breeding method of June snow, we should choose sandy loam rich in organic matter, loose and fertile, and good drainage and permeability.

Upper basin: Use plastic net or tile pad hole, which is conducive to drainage, and then pour the new soil into the basin body 1/3 as the subsoil, and add the new soil. Next, put the prepared June snow in, add the original soil and pat it, pay attention to make sure that the soil and roots are closely combined.

5. Root system under tie

June snow potted plants how to root, finish the above steps, basically completed. After pouring root water, it can be placed and managed. When new leaves appear and the roots are deep enough, they can be watered with running water. This step by step, about three months or so, the upper soil will gradually wash down, the roots will be exposed day by day, and the roots will be exposed.

Note: Do not fertilize

After June snow roots, must remember, do not fertilize, to fertilize, also have to wait three months, because too much fertilizer easy to grow branches and leaves, damage the shape! During this period, we can properly prune the upper leaves, literacy is conducive to rooting. As for how to trim June snow, there is a detailed introduction in front, here is not much to say.

The above are the detailed steps of snow in June. I wonder if you have learned them? In general, June snow vitality is quite tenacious, so we just need to be careful when operating, and then sketch well, basically you can make a beautiful June snow bonsai ~ so what are you waiting for? Let's move quickly!

How do you get snow in June?

I. Turn over the basin

When taking out the whole plant of June Snow, remember to put it on the side and pat it properly. Note that the soil sticking to the roots must be retained. Some people think it's best to keep the original earth ball, but it's still necessary to check the roots properly. Then, to be on the safe side, only a portion of the original earth ball can be retained.

II. purposive

Carefully observe the growth characteristics of the roots of June snow plants to determine the specific morphology. The best nature is to do everything. However, the growth of natural plants can not be satisfactory. Therefore, if you can't do the best of both worlds, you can pay attention to the front and take care of the side. The determination of the front is also a skill, and the root to determine the best viewing surface is the front. To improve efficiency, ideas can be made by sketching or thinking in advance.

III. root pruning

After having a more detailed understanding of the roots of June Snow, you can start pruning. Strong roots can be preserved, dead or weak roots should be removed in time. According to the intention to use brown silk bundling, then appropriate stone blocking to achieve the best effect. This step is simple and clear, and can highlight the main body.

IV. upper pot

Purple sand pots and organic, fertile sandy loam are recommended. When putting on the basin, remember to pad the holes with tiles to facilitate drainage. Next, pour the new soil into one-third of the basin as the subsoil, then add the new soil, and then put the completed June snow into it, add the original soil and pat it, paying attention to make sure that the soil and roots are tightly combined.

v. root system

After June snow is poured with root water, it can be placed for management. When new leaves appear and the roots are deep enough, they can be watered with rapid water. About three months or so, the upper soil will gradually wash down, the roots will be exposed day by day, and the effect will begin to appear when the roots are exposed.

These are the detailed steps. It should also be noted that because June snow grows vigorously, applying fertilizer will lead to excessive growth of branches and leaves, destroying the shape. Therefore, remember not to fertilize June Snow within three months, and appropriate fertilization can be carried out after three months.

June snow bonsai root lifting

The characteristics of June snow, is the root system developed, extensive management, should make an issue of root, than the general June snow bonsai is more interesting. I have a flower friend, last year will be born in June, July, June snow, sent me a few plants, all survived after loading pots. In order to lift the roots, this spring, take out the plants and soil balls, take out the tiles under the soil balls, fill the empty basin bottom again (replace the new basin can also be used), fill about 2/3 of the new soil basin, put the original plants and soil balls in the soil basin, fill and compact, which is conducive to the growth of roots. The original soil ball has been higher than the basin surface, for watering convenience, basin edge new soil to remove some, leave deep water can, watering to pour several times, so that the soil ball poured thoroughly. With the passage of time, the old roots gradually stick into the new soil, after about four months of washing, the old roots of the original soil ball gradually exposed, until the basin soil falls to the position of the water retention. As a result of the above management, the roots have all been deeply exposed, and the hanging roots are exposed, which is interesting. Before making, rotate the pot first, observe the surroundings, pay attention to the relationship between root shape and trunk branch, and select the best viewing surface. "Intention to write first", carry out comprehensive conception and determine the shape. Retain thick roots, cut off small roots, can be appropriate with single brown wire or thin iron wire, tie, even, dismantle, shear art processing, to achieve the shape you can imagine, the less the number of roots left, the simpler the better, that is, can reduce root water consumption, conducive to nutrient concentration, promote root stem thick, leaves lush, but also easy to observe, highlighting the root type. The processing of the roots is complete. After the root is finalized, start the modeling of the trunk branch, pay attention to the total height of the trunk only accounts for 1/2 or 2/3 of the root height, and make it according to this ratio to highlight the role of the root type. The trunk is like a human body. Therefore, the main branch planting is the sublimation of the artistic conception of bonsai, showing simple vigor and exuberant vitality. The manufacturing method comprises the following steps of: determining the tree shape trend change according to the root type, and integrating the trunk branch and the root type into a whole. According to the Yang School's principle of "bending along the curve, creating momentum with potential and following its nature", the trunk is bent and shaped with palm rope first, then the "top piece"(round) and then the "negative piece"(palm shape). The other pieces were produced in sequence. "Cloud slice" should be well-arranged, slice with wire pan tie, between the thin and dense alternate, smooth spectacular, in one go. (See photo). After artistic conception and elaborate production, the natural style is reproduced in the basin, and people are inspired to work hard and devote themselves to the construction of the four modernizations. Conservation is the key to maintaining the ornamental value of bonsai. In the management and conservation, patience and meticulous, strengthen pruning and shaping, make it vibrant, full of spring, place windowsill, desk, it is very elegant.