How to trim the triangular plum, the pruning method of the triangular plum is illustrated / 5 the trimming is beautiful.

Triangular plum, a very beautiful plant, has a long flowering period, bright colors and strong ornamentality. it is deeply loved by flower friends and is potted indoors by many people. It is easy to raise triangulated plum, but if you want to make it beautiful, you need to trim it properly. How to trim it? The following is the triangle plum pruning method diagram, follow the editor to understand and have a look.

First, how to trim triangular plum, 5 tricks

Triangular plum grows fast, if not properly pruned, there will be a variety of problems, such as branches are too dense, triangular plum does not blossom, and so on, will seriously affect the ornamental effect of triangular plum. As for how to trim the triangular plum, the editor summed up five tips: heavy cutting, short cutting, light cutting, thinning and shrinking, which is very practical. Let's move on.

2. Diagram of pruning method of triangular plum

According to the inquiry, there are many pruning methods of triangular plum, but all of them are to make it grow better and grow more beautiful. Trim trimmed plum, the editor summed up 5 tricks, specifically as follows:

1. Heavy cutting

This trick is aimed at veterans, but new flower friends seldom use it. If you are not satisfied with the triangular plum and want to greatly change its shape, you need to re-cut it at this time. Specific cutting method: cut off all the branches and keep a few main branches. In addition, the main branch should also be greatly trimmed, and the re-pruning looks very thorough.

2. Short cut / medium cut

This trick applies to all flower friends and is relatively light to trim. Specific cutting method: cut off some withered branches and unnecessary branches on the triangular plum plant, and cut the rest a little short. Short cutting can weaken the thickening trend of the mother branch and will not change the shape of the plant.

3. Light shears

In the trimming method of triangular plum, light cutting is easy to master, and the range of pruning is very small, which can be used by beginners. Specific pruning method: a little pruning of weak, diseased and withered branches, usually for seedlings.

4. Thinning cut

This trick is generally used in the triangle plum blossom, flower friends should learn to cut, which is conducive to next year's blossom. Specific pruning method: cut the annual or perennial branches from the base, which can promote the germination of new buds, branches and growth.

5. Shearing

In the trimming method of triangular plum, everyone should also master the method of shearing. Specific pruning method: pruning the branches that have been growing for many years, and if the plant volume is too large, it can be shrunk several times. The shrunk method is beneficial to promote the growth of the alternate branch and the germination of the latent bud, and weaken the growth rate of the mother branch, and the haircut is mainly to rejuvenate the old branch.

Note: through the graphic understanding of the pruning method of triangular plum, we will find that the pruning of triangular plum is mainly short, heavy and sparse. However, we need to pay attention to that the place that needs to be trimmed must be trimmed, in order to ensure the beauty of the plant type, do not be reluctant to prune, you must know how to give up!

How to trim the triangular plum and the pruning method of the triangular plum

If the triangular plum farmed at home wants to be beautiful, it must be trimmed twice a year. So how to trim trimmed plum, what are the methods of trimming plum? Today, the editor will take you to know:

Pruning method of triangular plum

First, the soil and nutrition of potted plants are very limited, and the growth space is also limited, so it must be retracted to make potted plants maintain a certain size of plant type, so as to avoid falling behind in nutrition, poor plant growth and unbeautiful flowering.

Second, people want to make the potted flowers not only bloom more, but also want the flowering plant shape to look good. Pruning is to achieve the organic combination of potted flowers and bonsai, so that the potted flowers of triangular plum have a sense of bonsai, and you can appreciate the plant type at ordinary times.

Third, cut off the weak branches, withered branches and some useless branches, cut out the layers, so that the branches are exposed to light, so that the healthy and sturdy branches they need can get more nutrition, grow stronger, accumulate more nutrients, and bloom more beautifully.

Fourth, the above three items only talk about the first pruning, the growth process has to slowly appreciate the slow pruning, but also continue to pinch and wipe the buds, remove some unnecessary buds and branches. If there are too many buds and too many branches and leaves, the nutrition of potted plants is always not enough.

After reading the introduction of the editor above, now you know how to trim and how to trim trimmed plum. I hope the above sharing of the editor will be helpful to you!

Pruning method diagram of triangular plum, trimming map of triangular plum bonsai

Spring is coming, trees and flowers are sprouting! It's time for trim pruning again. In order to let the triangle plum enthusiasts have a reference and reference, the author will take photos of their own pruning process before and after a comparison, in order to provide dinner for readers. This can only serve as a reference. Because everyone's aesthetic values are different, I beg your pardon, and please brick.

Trimmed plums must be fully pruned twice a year if they are raised beautifully. How to trim the triangular plum? When pruning triangular plums, three principles must be grasped: short, heavy and sparse. Cut short horizontal branches; re-cut new branches; remove dense branches and weak branches.

Pruning method diagram of triangular plum

Understanding of the types of pruned branches of triangular plum:

1. Erect branch: a branch that grows upright and upward in the crown.

2. Drooping branch: a branch that hangs down at the end of a branch.

Parallel branches: branches in which two branches extend parallel to each other on the same horizontal plane.

4. Overlapping branches: branches that overlap above and below two branches in the same vertical plane.

5. Withered branches: lifeless branches.

6. Growing branches: branches protruding from the periphery of the crown.

7. Bore branch: a short twig sandwiched between the main branches.

8. Reverse branch: a branch whose growth direction extends to the center of the crown and intersects with the trunk or main branch.

9. Whorled branches: several branches come from the same node or very close to each other and grow and extend radially around at the same time. Such branches are called whorled branches.

10. Root tiller: [branch] the bud strip at the root of flowers and trees.

All the above branches belong to the branches that should be cut off first in the process of pruning.

Pruning method diagram of triangular plum

Trim plum pruning common language reference

Cut mouth and cut bud:

After the branch is cut, the wound left behind is called the cut, and the bud closest to the cut is called the cut bud.

Cut type: when the branch is cut short, the cut mouth can be cut flat or oblique.

Flat cut mouth: located at about 5 mm above the cut bud, showing a horizontal state, the flat shear surface is small, easy to heal, and is commonly used in branchlet short shears.

Oblique cut: cut upward from the opposite side of the cut bud. Cut obliquely into an oblique plane of 45 °, making it slightly higher than the bud tip by about 5 mm. The lowest part of the slope is flat with the base of the bud. In this state, the wound is not too large, it is easy to heal, and the cut buds grow better.

Cutting buds: the direction and quality of cutting buds determine the growth direction of new shoots and the growth potential of branches. Considering the distribution of branches in the crown and the strength of the expected growth of new branches, when the crown needs to be expanded outward, the shearing buds should stay on the outside of the branches; if you want to fill the inner cavity, the direction of cutting buds should be inward; for overgrowing branches, in order to restrain its growth, use weak buds as cutting buds; when supporting weak branches, choose to keep full buds.

The pruning method of triangular plum comparison of triangular plum pruning

1. Heavy cutting: the branches are basically cut off, leaving the tree stump and several major branches, and the remaining major branches should also be cut very short. In particular, the branches that are not needed and those that destroy the plant type should be completely cut off. Re-cutting is generally used when the shape is changed.

2. Medium shearing: the specific gravity shearing should be lighter, only cutting off some dead branches and unnecessary branches, and the branches with good growth position will only be shortened, and the whole tree shape will not change too much. Medium scissors are generally used on shaped bonsai.

3. Light pruning: just cut short some weak branches, cut off diseased branches, cut healthy branches slightly, generally use them in seedlings, seedlings and young trees, and try to preserve more branches to form a strong tree potential, so as to facilitate photosynthesis and make the seedlings grow fast.

4. Retract: cut all the branches short so that the shape of this year's tree is about the same as that of last spring, so as to make room for the plant to grow and blossom, make the new branches stronger and bloom more beautiful and spectacular.