How to control the water of triangular plum, the method of water control and flower promotion / no watering to prolong the florescence

For triangular plum, many flower lovers should be very familiar with, it often appears in the streets of the south, is designated as the provincial flower of Hainan Province, is a highly ornamental plant. The natural purpose of planting triangular plum is to watch, but if you want to maximize its ornamental value, it is necessary to control water, so how can triangular plum control water? The following is a detailed description of the methods of water control and flower promotion of triangular plum by the editor.

1. Watering method of triangular plum

Before we solve the problem of how to control the water, let's take a look at the watering method of triangular plum. It is understood that there are many and large leaves of triangular plum, and water is easily consumed, so we should water frequently, especially in summer, we should increase the amount of water, and the specific watering times are as follows:

Spring and autumn: water triangulated plum once a day; summer: once in the morning and evening; after the growth period, reduce the amount of water at the end of summer, usually 4 times a week; after the emergence of flower buds, increase the number of watering times. Water once a day in the morning and evening. However, the amount of water should not be too much, otherwise symptoms such as rotten roots, yellow leaves and falling flowers of triangular plum will appear.

Finally, after October in early winter, due to the decrease in temperature, water evaporation becomes slower, and the watering times should also be reduced, once every three days. As the temperature drops, if the soil is not dry, do not water it, or wait until the soil is dry before watering. Generally speaking, watering triangular plum is best to grasp the principle of "do not dry, do not water, water thoroughly" principle.

Second, how to control the water of triangular plum and water less

In the triangle plum culture method, introduced a lot of places we should pay attention to, but if we want to raise well, there is another point that we should pay attention to, that is, the problem of water control! Why triangular plum does not blossom, why is the flowering period of triangular plum short, in fact, this is mainly related to water control. Then how to control the water of Triangle Plum? Let's move on.

Third, the methods of water control and flower promotion of triangular plum.

1. Water control time

How to control the water of triangular plum, first of all, we should pay attention to the time. The water control of triangular plum generally lasts about three weeks, preferably 40 days before flowering. When controlling water, we should irrigate less than usual, or only spray. Note: do not apply fertilizer during the water control period.

Editor hint: triangulated plum from the emergence of buds to flowering, the time is generally about 20 days, and water control is best carried out 40 days before flowering, so we should consciously grasp the time. If you want triangular plum to blossom in October, you need to start controlling water at the end of August.

2. Methods of water control

When it comes to the method of water control and flower promotion of triangular plum, it is actually very simple, according to everyone in the flowerpot, in the stage of water control, we do not water it. Wait until the triangular plum is about to wither when it is short of water, only irrigate the usual water, or spray a little water (hot weather can be poured more), in order to keep the plant withering for half a day and not withering for half a day.

In short, the purpose of water control is to make the plum leaves withered, so that it can not sprout and grow new leaves, so that all plant nutrients are supplied to the old leaves, promoting branch maturity and flower bud differentiation. However, during the period of water control, the plant is in a wilting state, the flower friends with poor bearing capacity had better not use water control, the heart is very tangled!

3. The method of promoting flowering of triangular plum.

Before controlling the water, after the fertilizer was topdressing with 1:1:1 compound fertilizer. After the leaves wilt, add a small amount of water or spray to the leaves. This is repeated until all the leaves fall off and pour water through. After doing so, the triangular plum will be full of beautiful flowers.

Practical experience of triangular plum controlling water and promoting flower how does triangular plum control water? How to prolong the flowering period of triangular plum?

When it comes to triangular plum, I believe everyone will be attracted by its beautiful color and attractive fragrance. Triangular plum is a common flower that blossoms this season. Deeply loved by many flower friends. So, do you know the practical experience of triangulated plum in controlling water and promoting flowers? Today, the editor will give you a detailed introduction.

First, determine the flowering time.

It must be calculated backwards according to the local temperature and the most suitable time for flowering. It can blossom from December to New Year's Day in Guangdong, even during the Spring Festival. Guilin here can only blossom in October-November, the temperature is more suitable, Xiaoyangchun weather, not too cold, the daily average temperature reached 12 degrees. It's not too hot, and the florescence is prolonged. If the weather is good, you can drive to New Year's Day. The florescence lasts as long as sixty days. If it blossoms on National Day, the temperature will be too high. The flowering period is only one month. According to this observation, I choose to bloom from the end of October to November. It can not only prolong the florescence, but also pass the winter safely. If it is Beijing, we can only consider blooming in October, which can not only add glory to the National Day, but also safely survive the winter. The farther to the north, the earlier it is, and the temperature is unforgiving.

Second, when did water control begin?

Water control usually takes three weeks, about 21 days. It takes about 20 days from bud to full bloom. Assuming that flowering is arranged on National Day, then around the 10th of September, water control must be completed, sufficient water supply must be provided, and fertilization should be carried out at the same time to let the flowers quickly show buds and enter the blooming flowers. The water control will begin around August 20 when it goes back to 20 days on September 10. My hanging garden is scheduled to bloom from the end of October to November, so I have to end the water control in mid-October and return for 20 days, so I began to control the water on September 25. This is my method of calculation. Considering my roof, it rained and even began to control the water in mid-September. The season can only be pushed forward, not backward. The time of water control can only be long, not shortened, to facilitate the full differentiation of flower buds. Flower friends of the triangle plum are mostly balcony or greenhouse, you can consider the local climate, flowering and water control time to design, not disturbed by the weather.

Third, how to control water?

My practice is that according to the size of the basin, the size of the plant is different, in the stage of water control, do not water at the beginning, let it wither without water, and then give only half the usual water, or spray some water, and keep withering for half a day and not withering for half a day. According to the climate, if the weather is too dry or too hot, appropriate more water or rain will not be watered. The goal is that leaves must wither every day, no more new buds, new leaves, nutrients to old leaves, old branches and flower buds to differentiate. During the period of water control, you can not apply fertilizer, dry state, fertilizer absorption is not good, but also cause root damage.

Fourth, the management of blooming.

After three weeks of water control, we should pour enough water, loosen the soil and cut the roots to promote new roots, and then apply fertilizer for more than three times. Promote bud germination, growth, inflorescence elongation, flowers in full bloom. Usually fertilize once a week, after blooming, fertilize again. It will be able to meet the needs of the whole florescence. When the old root is cut off, the new root has a strong ability to absorb fertilizer, and it only flourishes during flowering. This must be done.

That's all I know about triangular plum today. I hope it will be helpful for flower friends to read this article. If you want to know more about triangular plum, please continue to pay attention to the succulent flower bed, we will provide you with more related knowledge!

Methods of water control and flower promotion of triangular plum

Determination of flowering time of triangular plum

According to the flowering time of various places, you can calculate that Guangdong blossoms from December to New Year's Day, even during the Spring Festival, and Guilin blossoms from October to November. The flowering time and temperature in these areas are more suitable, the daily average temperature is 12 ℃, and the florescence can be as long as 60 days, but if the National Day blossoms, the temperature is higher and the florescence is short.

To sum up, it is suggested that the florescence should be from the end of October to November, which can not only prolong the flowering period, but also pass the winter safely. October can be considered in the northern region, but the farther north it is, the earlier it should be.

Water control method of triangulated plum

Water control time

Water control usually takes three weeks, and it takes about 20 days from budding to flowering. According to the calculated flowering time, water control begins 40 days in advance. If you want triangular plum to blossom in October, you need to start controlling water at the end of August.

How to control water

The method of water control is very simple, according to the size of the flowerpot, do not water in the water control stage, wait until the water shortage withered, only half of the usual water, or sprinkle some water. Every day to ensure that the plant withered for half a day, not withered for half a day. According to the climate, if the weather is muggy, pour more water appropriately, or do not water when it rains. In a word, the purpose of water control is to wither leaves every day, not to sprout and grow new leaves, to supply all plant nutrients to old leaves, to promote branch maturity and flower bud differentiation.

Pay attention to do not apply fertilizer during the period of water control, under the condition of drought, the absorption of fertilizer is not good, and it will hurt the root. However, during the period of water control, the plant is in a wilting state, the mental bearing capacity is poor, do not use the water control method, it is very tangled.

Blooming management

After three weeks of water control, water was fully watered, then the soil was loosened and roots were cut, and topdressing was applied three times, usually once a week, twice before flowering, and once again when the flower was in full bloom to promote bud germination.

In order to control the inflorescence too long during flowering, so that the flowers are concentrated and the plant type is compact, paclobutrazol is used once and the concentration is 2/10000 when resuming watering.

Editor's suggestion

Waiting for the triangular plum to blossom in the stage of water control, the leaves of the flowers are drooping, listless, lack of vitality, and the flower growers are in a bad mood, but they still have to be patient and must be observed carefully, otherwise the plants are easy to die during the water control period. Once the flowers bloom according to their own expectations, the sense of achievement is indescribable! The garden is full of flowers in full bloom, Xin Xin flowers are also in full bloom!