How to water the Ping an tree? What is the watering time / amount of water (with answer)

Everyone likes the healthy growth and luxuriant branches of their own Ping an tree, and watering is the key to achieving this. In fact, watering is also an important part of the breeding method of Ping an tree, so how to water Ping an tree? Let's take a closer look at watering techniques.

How to water Ping an tree

Compared with other plants, Ping an tree watering has a certain attention, and before we understand how Ping an tree is watered, we need to know its water requirements. In general, the most suitable soil moisture is more than 80%. Due to the different climate of each season, the humidity will change constantly, so the watering will be adjusted with time.

I. basic requirements for watering Ping'an trees

According to the water requirements of Ping an Tree, we need to meet a certain standard when watering, that is, to keep the soil moist in the basin, although the humidity needs to reach 80% of the best, it is often impossible to measure without professional tools. and we can judge the soil moisture by visual observation, as long as there is no chance of slight moisture, we can basically meet the requirements.

Second, specific watering methods

Watering the safe tree not only meets the basic requirements, but also needs to be watered appropriately according to the changes of the seasons, when it needs to be watered, how much each time, and so on. Let's introduce how to water the safe tree in detail below.

When will it be watered

When we see that the surface of the soil is dry, we need to water the safe tree.

2. How much water should be watered each time

A. During the growing period

Water once a week to keep the soil moist, do not water too much at one time, do not let stagnant water appear in the basin soil, you can first water, wait for the soil to absorb a certain amount of water, and then water again in an hour, which can prevent the occurrence of half of the water.

B. Summer watering

As the summer temperature is high and the air is relatively dry, how to water the Ping an tree at this time? The answer is that the watering times can be changed to 2 times a week, and water can be sprayed around the leaves and plants of Ping an trees, so that the air will not be too dry.

C, autumn and winter

The temperature will drop in winter, the safe tree will grow more slowly than in other seasons, and it needs less water than before, so watering can be reduced appropriately, but do not let the soil be too dry.

Conclusion: if you ignore the watering problem of the safe tree, it will lead to many other problems, such as yellowing and mildew of the leaves, and even worms, so we must pay attention to watering, neither negligent watering nor too much watering at one time, so that the safe tree can thrive.

What if the leaves of Ping an tree turn yellow and fall? it can be solved from soil / watering / environment.

The yellowing of the leaves of Ping an tree is an annoyance that people often encounter, because some people lack experience, so they do not know how to solve this situation, and some people will even give up Ping an tree, which is obviously wrong. The yellowing and falling leaves of Ping an tree are caused by many factors, as long as we find the cause and take reasonable measures, we can improve the yellowing and falling situation.

What if the leaves of Ping an tree turn yellow and fall?

Yellowing and falling are common phenomena in planting safe trees. in order to avoid this problem, we need to know what causes the leaves to turn yellow. Botanists summed up several main reasons: watering problems, fertilization problems, environmental problems, soil problems and so on. The phenomenon of yellowing and falling leaves of Ping an trees can be solved from these aspects.

I. watering problem

1. Too little watering

Phenomenon: if the leaves start yellowing from the bottom up, especially the yellowing of the old leaves is serious, it is probably due to the lack of water and drought caused by too little watering.

Treatment: water the safe tree in time, the principle is to water it thoroughly every time, dry and wet alternately, do not wait until the basin soil is completely dry before watering, in addition, understand that the leaves of the safe tree turn yellow and fall.

2. Too much watering

Phenomenon: the root system was damaged and rotted, and there was no obvious change in the old leaves and plants, but the new leaves yellowed.

Treatment method: too much watering causes the leaves of Ping an tree to turn yellow and fall, but the treatment method is actually very simple, improve the drainage of the soil, reduce the amount of each watering, and avoid stagnant water in the basin.

II. Fertilization

1. Excessive fertilization

Phenomenon: new leaves are hypertrophic and uneven.

Treatment method: control the amount of fertilization, watering so that excess fertilizer discharged with water, the premise is that there is no water in the basin.

2. Fertilizing too little

Phenomenon: new leaves and tender stems turn yellow first.

Treatment: topdressing in time can increase the number of times, but can not apply a large number of fertilizers with high concentration.

III. Environmental issues

1. the light is too strong

Phenomenon: sunlit leaves turn yellow, while other leaves are normal.

Treatment: reduce the light intensity, often the leaves of Ping an tree yellowed and fell in summer, because the leaves are easy to yellowing and fall after being baked by the hot sun, so they should be maintained in a place with 50% shade in time.

2. The temperature is too low

Phenomenon: some of the leaves are frozen and the outer leaves turn yellow.

How to deal with it: move the safe tree indoors and keep it in an environment with a temperature of more than 10 degrees.

IV. Soil problems

The newly purchased Ping an tree will be yellowed because it is transplanted before the sale, and the Ping an tree will be adapted to the environment. In addition, businesses may also put less soil in the basin, which will also cause the leaves of the Ping an tree to yellowing and falling.

Treatment method: if the basin soil is too little, the basin soil needs to be replaced; if the basin soil is normal, it can be maintained in a cool and ventilated place, and the seedlings can return to normal after a period of time.

Conclusion: there are many reasons for the yellowing and falling leaves of Ping an tree. in addition to the above main reasons, it may also be caused by improper maintenance of diseases and insect pests, so we must adopt correct breeding methods of Ping an trees and do a good job in pest protection at the same time.

How to raise Ping an trees? the breeding methods and precautions / lighting of Ping an trees should be fastidious.

The Ping an tree, which originated in Taiwan, China, is very popular with people because of its unique flower language, so more and more people choose to plant it, but many people do not know how to raise it. Today, the editor will bring you detailed breeding methods and precautions for Ping an tree.

How to raise the safe tree

The favorite growing environment of Ping an tree is warm, humid and sunny. At the same time, it also has places where it can endure shade, like warm heat, no frost, snow and fog, and has poor drought resistance and weak ability to resist stagnant water, cold and dryness. Therefore, we must have the breeding methods and precautions of Ping an tree. Below, we will introduce how to raise Ping an tree from five aspects: light, temperature, moisture, soil and fertilizer.

1. Requirements of lighting

Ping an tree likes sunlight, but it is more shady. Its requirements for light will change greatly in different growth stages. For example, it can tolerate shade in young trees, but it needs more light when it grows to 6-10 years. Therefore, for Ping an trees in different periods, we should pay attention to different lighting requirements.

Breeding method: after entering the summer, the potted Ping an tree can be moved to the shade or indoors, if the leaves are yellowed because of the strong light outside. After the end of the summer to move outdoors need to pay attention to the first shaded environment maintenance, and then move to the outside, can not be too impatient.

2. Temperature requirements

The ideal temperature is 20-30 degrees, but it is difficult to meet this requirement in most places, so how to raise the safe tree at this time? First of all, we need to know that young trees are intolerant of low temperature, and it is easy to crack the bark or even freeze to death if they are left outdoors, so it is necessary to ensure that the ambient temperature is higher than 5 degrees in winter. Do not put it in a high temperature environment above 32 degrees in summer.

Breeding method: move the safe tree indoors in winter and maintain it where there is no cold wind, put it in a ventilated and shaded place in summer, and take appropriate cooling measures if the temperature is too high.

3. Requirements for watering

Ping an tree likes a humid environment, so in the cultivation methods and precautions of Ping an tree, we must pay attention to keeping the basin soil moist, but do not let it have stagnant water. 80% humidity is the best.

Breeding method: in the drier period in summer or other seasons, it should be moved indoors, and the foliage and basin soil are often sprayed with water, watering should be controlled after autumn, and less water should be watered in winter. Do not let the basin soil appear stagnant water.

4. Fertilizer requirements

Because the plant of Ping an tree is plump and its leaves are large, so the amount of fertilizer it needs is relatively large, so we need to pay attention to fertilizing it in time, but to avoid fertilization leading to its leaves yellowing and so on.

Breeding methods: from spring to autumn, thin cake fertilizer or alum can be applied once a month, and phosphorus and potassium fertilizer can be applied twice after autumn, which can promote its plant growth, while fertilizer should be stopped in winter.

5. Soil requirements

Ping an tree has good acid resistance, so when choosing soil, we should try to create a warm and humid environment for it.

Breeding methods: when choosing soil, you should try to choose loose, ventilated and well-drained soil, especially if it is acidic sandy soil rich in organic matter.