Water insertion Propagation of Colored Leaf Grass
Colourful leaf grass is an herbaceous flower, and its reproductive energy is very strong, especially in the water method, the success rate is even higher. The following are the steps of water insertion propagation of colourful leaf grass:
1. Prepare the container:
The cuttage container for colored leaf grass can be a wide □ bottle, or you can cut off the upper part with a beverage bottle and fill the lower part with fresh water. The container must be clean, the water must be clean, and it is best to store water in a large cola bottle for more than a day for cutting and follow-up management. the tap water released at that time must not be used.
2. Cut the cuttings:
When the main branch or side branch of colourleaf grass has 4 nodes or about 10 cm in length, select the thick stem, leaving only 1 to 2 nodes of opposite leaves at the base, cut off the upper part, and cut the □ smoothly without squeezing and tearing □. Then, cut off the lowermost pair of leaves of the cuttings, and concentrate on the base of every 3 to 5 cuttings, bundle them with white thread pine and wait for water insertion.
3. Water plug management:
It is best to put cuttings in water from 3 cm to 4 cm from □ bottle. After that, put it in the place of scattered light, pay attention to change the clear water (reserve water) every 2 to 3 days, and pay attention to replenish the falling water level in the bottle due to evaporation every day. The white root can be seen in 7 to 10 days under the condition of 18 degrees Celsius to 25 degrees Celsius.
4. Put on the basin:
After 7 to 10 days, you can move the plant with white roots to a beautiful glass bottle or you can pot it. When it is seen that there are several adventitious roots ranging from 1 cm to 2 cm at the base of the cuttings, they can be put on the pot or planted in time. Pay attention to careful operation, do not damage the root system, and then maintain in the shade of flowers for about 10 days, you can enter the normal management.
How to insert Colored Leaf Grass with Water and the method of Water insertion Propagation of Colorleaf Grass
Colored leaf grass is an herbaceous flower with strong reproductive ability, especially in water method, the success rate is even higher. The following are the steps of water insertion propagation of colourful leaf grass:
1. Containers to be prepared for colourful leaf grass:
The cuttage container for colored leaf grass can be a jar, or you can cut off the upper part with a beverage bottle and fill the lower part with fresh water. The container must be clean, the water quality must be clean, and it is best to take a large cola bottle to store water for more than one day for cutting and follow-up management, and the tap water released at that time must not be used.
2. Cutting cuttings of Colored Leaf Grass:
When the main branch of coloured leaf grass or the side branch that passes through the heart has 4 nodes or about 10 cm in length, select the thick stem, leaving only 1 to 2 opposite leaves at the base, cut off the upper part, the cut should be smooth, and there is no wound of extrusion and tear. Then, cut off the lowermost pair of leaves of the cuttings, concentrate on the base of every 3 to 5 cuttings, bundle them together with white thread pine, and wait for water insertion.
3. Water planting management of colourful leaf grass:
Generally, it is best to insert cuttings into water from 3 cm to 4 cm from the mouth of the bottle. After that, put it in the scattered light place, pay attention to change the clear water (reserve water storage) every 2 to 3 days, and pay attention to make up for the falling water level in the bottle due to evaporation every day. The white root can be seen in 7 to 10 days under the condition of 18 ℃ to 25 ℃.
4. The pot of colourful leaf grass:
After 7 to 10 days, you can move the plant with white roots to a beautiful glass bottle or you can pot it. When it is seen that there are several 1 cm to 2 cm adventitious roots at the base of the cuttings, they can be put on the pot or planted in time. Pay attention to careful operation, do not damage the root system, generally in the shade of flowers for about 10 days, you can enter the normal management.
The above is a simple summary of the methods of water insertion and propagation of colored leaf grass. The suitable temperature for the growth of colourful leaf grass is about 20 ℃. Colourful leaf grass is more hardy, but it should be moved indoors before and after Cold Dew, and the room temperature should not be lower than 10 ℃ in winter. Coloured leaf grass does not have high requirements for soil, but it is necessary to keep good drainage as far as possible to avoid rotting roots.
- Prev
The propagation method of dragon spitting pearl
Longtuzhu is commonly used in cutting, ramet, sowing and propagation. Cuttage propagation: often by branch cutting, bud cutting and root cutting. The branches can be inserted into the top twigs of the strong and disease-free branches, or the lower old branches can be cut into 8-10 cm stem segments as cuttings. Bud grafting is to take the lateral buds on the branches and take part of them as cuttings.
- Next
How to breed Oxalis
Oxalis is mainly propagated by bulbs and individual plants, and some are propagated by seeds. The conjoined stems of Oxalis can be divided into three types: mother corm, bud corm and leaf corm. Among the three kinds of bulbs, the female corms have the energy of direct meristematic corms, with a diameter of 2 to 2.5 cm and residual leaf scars.
Related
- Fuxing push coffee new agricultural production and marketing class: lack of small-scale processing plants
- Jujube rice field leisure farm deep ploughing Yilan for five years to create a space for organic food and play
- Nongyu Farm-A trial of organic papaya for brave women with advanced technology
- Four points for attention in the prevention and control of diseases and insect pests of edible fungi
- How to add nutrient solution to Edible Fungi
- Is there any good way to control edible fungus mites?
- Open Inoculation Technology of Edible Fungi
- Is there any clever way to use fertilizer for edible fungus in winter?
- What agents are used to kill the pathogens of edible fungi in the mushroom shed?
- Rapid drying of Edible Fungi