What if the leaves of the happiness tree fall off as soon as they touch it? how can the leaves of the happiness tree be saved / changed?

The happiness tree feels good just by its name. After seeing its beautiful plant type and green leaves, I want to raise it even more. In life, the people who raise the happiness tree are very big, but in the process of breeding, many flower friends will encounter the situation of losing their leaves, so what about the leaves of the happiness tree as soon as they touch it? How can the leaves of the happiness tree be saved? In this regard, it is up to the editor to solve everyone's doubts.

First, the leaves of the happiness tree will fall off as soon as you touch them, looking for the cause.

As a beautiful plant, the happiness tree is kept at home by many friends, but many of them often encounter some headache problems, such as the leaves of the happiness tree turn yellow and fall off as soon as they touch it. What's going on? In this regard, we should first examine the reasons for the loss of leaves in the happiness tree.

As far as the editor knows, there are six kinds of situations that will cause the leaves of the happiness tree to fall: improper watering of ①, improper fertilization of ②, temperature of ③, light of ④, humidity of ⑤, and ⑥ worm. Next, the editor will tell you how to save the leaves of the happiness tree.

Second, how to save the leaves of the happiness tree

1. Improper watering

Watering is essential in the cultivation of happiness trees, but it is troublesome for many beginners. Because the happiness tree likes the wet environment, but the novice often loses its leaves because it is out of control. There are two situations about improper watering: one is too much watering, the other is too little watering.

Too much watering: the soil is in a moist state for a long time, when the oxygen content of the soil will decrease, and in serious cases, the roots of the tree will not be able to absorb oxygen and nutrients normally, and then the leaves of the tree will fall off as soon as it is touched. Solution: immediately reduce watering and often loosen the soil to make the soil well ventilated.

Too little watering: the root of the happiness tree is not fully absorbed, which can easily cause the leaves to be dull and dull and fall off as soon as they are touched. Its performance is as follows: the lower old leaves are aging, and gradually wither and yellow and fall off from the bottom up. Solution: need a small amount of watering, make it gradually recover and then transfer to normal watering.

2. Improper fertilization

In addition to improper watering, improper fertilization will also lead to the loss of happiness tree leaves. With regard to improper fertilization, there are also two situations: one is excessive fertilization, the other is too little fertilization.

Excessive fertilization: the new leaves absorb enough nutrients, grow thick, and the surface is uneven, while the old leaves are difficult to absorb nutrients, resulting in dry tip scorched yellow shedding. Solution: stop fertilizing immediately, and increase the amount of water, dilute the fertilizer in the basin, or simply change the pot soil directly to make the rich trees refreshing again.

Too little fertilization: if it is not fertilized or changed for a long time, the soil will lack nutrients, causing the happiness tree leaves to fall off as soon as they are touched. Solution: replace it with new loose and fertile culture soil and apply thin compound flower fertilizer.

3. Temperature reason

The happiness tree likes the warm environment, and the best growth temperature is 22-28 ℃. In the hot season, once the temperature exceeds 30 ℃, the growth of the happiness tree will be affected, and its leaves will fall off as soon as the time is long, while in winter, once the temperature is below 5 ℃, the happiness tree will lose its leaves as soon as it is touched.

Solution: how to save the leaves of the happiness tree? If the temperature is too high, we should spray water on the leaves as much as possible, lower the temperature, or move it to a cool and ventilated place with shade for the summer; if the temperature is too low, you can move the plant to a room with air conditioner or electric heater to ensure that the room temperature is not less than 8 ℃, so that it can survive the winter safely.

4. Lighting reasons

The leaves of the happiness tree fall off as soon as they are touched, in addition to water and fertilizer, the light can not be ignored. If the loss of leaves is caused by light, there are also two situations: one is that the light is too strong, and the other is that there is too little light.

The light is too strong: the happiness tree is a light-loving plant, and it can also tolerate shade slightly, either in full sunshine or in semi-overcast environment. But once let it bask in the sun, it is very easy to cause young leaf tip and leaf edge scorched, or leaf yellow shedding. Solution: move the happiness tree to a well-ventilated shady place in time and pour a small amount of water.

Too little light: the light is too strong, but if you leave the happiness tree in a dimly lit room for a long time, the chlorophyll in the leaves will decrease, and over time, the leaves will turn yellow and detach. Solution: it's simple, just increase the lighting time.

5. Humidity problem

During the cultivation of the happiness tree, it is also important to maintain the humidity of the air around the plant. Once the air is dry, the leaf tip of the happiness tree often dries up and falls off.

Solution: how to save the leaves of the happiness tree? At this time, we should pay attention to water spraying, plastic film cover and other methods to increase air humidity to keep it at 70-80%.

6. The cause of the worm

In the process of maintaining the happiness tree, it will be disturbed by diseases and insect pests if it is not operated properly. When it suffers from leaf spot disease, its leaves will be locally necrotic, yellow spots or patches will appear, and in severe cases, the whole leaves will wither and fall off. In addition, when the happiness tree is harmed by shell insects, its leaves are also in danger of falling.

Solution: find out which kind of diseases and insect pests, and then spray the corresponding agents, as for what to spray, there is a detailed introduction in the prevention and control of diseases and insect pests in the happiness tree, so I won't say much here.

The leaves of the happiness tree will fall off as soon as they are touched. After reading the above content, we should know what to do after we meet again. In fact, the loss of leaves is caused by one reason, but it is often caused by a variety of factors, so when we encounter this situation, we must make a correct diagnosis, so that we can prescribe the right medicine to the case.

What about the curling and drooping leaves of the happiness tree, supplementary light / controlled fertilization / proper watering

Happiness tree, a kind of plant with beautiful meaning, beautiful plant type and green leaves, is very suitable for indoor breeding and is welcomed and loved by the majority of flower friends. But in the process of breeding, once we are careless, the happiness tree may have curly leaves, or even droop, then the happiness tree leaves curl and droop how to do? Here are several reasons and solutions, come and have a look!

First, the leaves of the happiness tree curl and droop to find the cause

When raising the Happiness Tree at home, many flower lovers may encounter some problems, such as the leaves of the Happiness Tree curl and droop, the leaves of the Happiness Tree turn yellow, and the leaves of the Happiness Tree fall off as soon as they are touched. At this time, we should not be in such a hurry. The most important thing is to find out the causes of these diseases. Here are the reasons for the curling and drooping leaves of the six happiness trees sorted out by the editor, and how to deal with them. Let's move on.

Second, the causes and solutions of curling and sagging leaves of Happiness Tree.

1. Not adapting to the new environment

Due to changes in the living environment, there will be curling and drooping leaves of the happiness tree, which generally occurs in the flower friends who buy the happiness tree online. If you buy a happiness tree online, it is easy to have a large geographical span, and the environment will change too much, which will cause the happiness tree not to adapt, resulting in curling and sagging leaves.

Solution: at this time, we can communicate with the shop owner to understand the growth environment of the happiness tree before we buy it, but we make corresponding adjustments at home to keep the environment unchanged. Then slowly change until the plant is fully adapted to the current environment, after a period of time, the happiness tree will return to health. In short, when raising a happiness tree, don't change its growing environment at once.

2. Poor ventilation

Raising happiness trees indoors has a very big disadvantage, that is, poor ventilation. Once the happiness tree is placed in an unventilated place for a long time, the growth of the plant will be affected, resulting in curling and drooping leaves.

Solution: what if the leaves of the happiness tree curl and droop? At this point, it is necessary for us to often open windows for ventilation. In winter, we should also choose a warm noon and move it outside to bask in the sun to prevent plants from freezing damage.

3. Too little watering

In the cultivation method of Happiness Tree, we have said that Happiness Tree likes a humid environment, so if we water it less, the plant will not absorb enough water. When the leaf transpiration, it will consume a lot of water, at this time the lack of water, it will cause leaf curl.

Solution: if the happiness tree leaves are curled and drooping caused by too little watering, it is easy to solve, replenish water in time, but do not water too much, just keep the basin soil moist.

4. Overwatering

Happiness trees need plenty of water, so watering can not be less, but not more! Once the happiness tree is watered too much, it will easily lead to stagnant water in the basin, resulting in damage to the root system of the plant. The result is that the growth of the happiness tree is limited, the first to be affected is the leaves, yellowing, blackening, curling, sagging and other phenomena will appear.

Solution: what if the leaves of the happiness tree curl and droop? If it is caused by too much watering, you should move it to a ventilated and illuminated place (preferably a balcony) to allow the water in the basin to evaporate quickly, or more directly, change the soil to make the happiness tree fresh again.

5. Lack of light

In addition to the above points, the lack of light is also one of the reasons for the curling and drooping leaves of the happiness tree. Because although the happiness tree can tolerate shade, it cannot stand concealment for a long time. Once the light is insufficient, its leaves will curl and sag.

Solution: the happiness tree grows normally and must have enough sunlight. If the indoor light is too weak, the happiness tree can be moved to a sunny place every few days to receive sunlight.

6. Excessive fertilization

Happiness tree likes fertilizer, in order to make it grow well, proper fertilization is very important. But we can not fertilize too much or too often, this can easily lead to too much nutrition in the basin soil, too much nutrition will also lead to leaf curl.

Solution: when the condition is not serious, we can dilute the agricultural fertilizer by watering; if the situation is serious and there is no way, we can only change the soil, and after a period of time, the plant will return to health.

With regard to the curling and drooping leaves of the happiness tree, the editor has introduced this. I believe that if you encounter a similar situation again, you should know how to do it! Generally speaking, the happiness tree is relatively easy to raise, but we had better keep it in accordance with the requirements, do not be too negligent, do these two points, your happiness tree will grow very beautiful.

How to trim bonsai of fruit trees in winter

At present, people pay more and more attention to the quality of living environment. Fruit tree bonsai has become a work of art for some families to decorate household space because of its high ornamental value and economic value, but fruit tree bonsai has its special features and needs our careful care, especially to do a good job of pruning. The construction of fruit tree bonsai is generally divided into two times a year, once in summer and once in winter. The editor focuses on how to trim the bonsai of fruit trees in winter.

The method of pruning bonsai of fruit trees

The main task of winter pruning is to grasp the modeling of bonsai. The time is from the falling leaves of fruit trees to the beginning of sprouting the following spring. There is a saying in the industry that "winter pruning trees are prosperous". Because at this time most of the nutrition has been transferred from the fallen leaves and branches to the trunk and roots of fruit trees, the construction of fruit trees during this period will hardly cause any loss to its nutrition. At the same time, without the barrier of the leaves to the line of sight, we can more easily observe the structure of the crown, which brings convenience to our analysis and growth prediction of the crown, and makes it easier for us to grasp its shape. Therefore, winter pruning is very important for bonsai fruit trees.

The first step of construction is called shearing, which is to cut off some branches that have grown for many years, so as to play a role of rejuvenation or inhibition. The key to this step is to determine the reduced parts according to the thickness and strength of the branches, and then through different splicing methods to determine which parts branch and which parts need to be suppressed.

The second step is pruning and thinning, which requires the removal of almost all annual or perennial underdeveloped branches, such as dried branches, disease and insect branches, as well as some periphery developed, overstraight and unusable worthless branches. The purpose of pruning and thinning is to improve the ventilation and light transmission conditions of the crown, which can enhance the absorption of light by bonsai and maximize photosynthesis. Accumulate enough nutrients in winter.

The third step is to grow, that is, to let some annual branches continue to grow without pruning. Mastering the growth of long branches is the key to doing a good job of this step. if the backbone branches are weaker than the auxiliary branches, it is necessary to grow the backbone branches and control the auxiliary branches; if there are a large number of long branches and strong branches, you can also grow a small number of long branches and strong branches during pruning and leave them to be controlled during summer pruning. When it is found that the growth of the backbone branch is still very prosperous in the following year, other treatments are needed.

The last step is to cut short. We can decide how to prune the branch according to its own characteristics. If we want to be conducive to the formation of flower buds, we should cut the branches a little lighter, leaving the branches longer, which will ensure that there are more bud eyes. Then it is difficult to concentrate nutrients, and it is easy to send out some medium branches and short branches, which is naturally conducive to the production of flower buds. If you want to send out some strong middle branches, or cultivate big branches and rejuvenate weak branches, then you can make medium and short cuts, and keep the remaining part at about 2/3 or half; if you want to cultivate branches or renew branches, you can use heavy short cuts; when you want to update the crown and make it more compact, you can use very heavy short cuts to deal with those erect branches and competitive branches.

Points for attention in pruning bonsai of fruit trees

During the pruning period, the most suitable pruning period for family farming or bonsai enterprises with small production in cold areas is from the release of dormancy in early spring to before germination. Because the branches and buds are bruised in the process of preventing cold in winter, the extra branches can play a protective role. After fine pruning, the branches and buds have been determined, and once damaged, it is difficult to make up for it. Due to the rapid rise of basin soil temperature in early spring, potted trees root earlier, such as too late pruning, it is easy to produce bleeding.

All kinds of pruning methods should be applied reasonably. When pruning, it is necessary to identify the flower buds, branches and the expected part of the flower, and try to make the fruiting part close to the trunk and main branch, so as to make the whole tree plump and compact. The number of flower buds of trees with initial fruit is often small, so they should be preserved and utilized as far as possible. After a year of fruit, the tree potential can be relaxed, and the number of flowers will increase. When the number of flowers is large, some flower buds can be removed so that they can be distributed reasonably according to the needs of modeling.

Pruning should be closely coordinated with styling and shaping, and each shearing should take into account its blossom, fruit and shape. It should be pointed out that the shape of bonsai of fruit trees changes greatly every year or even every season, including fruit, branches and fruiting parts of the year, and once its basic shape is determined, it should be continued and improved year by year. In order to avoid unreasonable pruning contrary to modeling, pruning can first bend and pull branches according to the needs of modeling, determine the backbone branches or must remain branches, remove disturbed branches, and finally deal with other branches. "first whole, then local; set first, then determine fruit" should be the principle that must be followed in the process of bonsai pruning of fruit trees (including summer pruning).

Dormant pruning is often combined with basin change. Because there are more root injuries during the pruning of the root system in the process of changing the basin, the aboveground pruning also needs to be aggravated accordingly, that is, the growth point (the number of germinating branches in the next year) and the amount of fruit should be appropriately reduced. The period of operation should not be too late, it is best to be carried out after defoliation in autumn, in order to restore the roots earlier, a large number of new roots have occurred when sprouting in spring, and the growth and development of that year is completely normal.

All in all, fruit tree bonsai can be regarded as an important component of Chinese traditional culture. A good bonsai takes a long time to take shape, and we need to spend a lot of energy to take care of it. When we learn the knowledge of fruit tree bonsai pruning and successfully apply it to practice, and buy a successful work of art for our own family, the sense of happiness and achievement is difficult to express in words.