How to cultivate hydroponic happiness tree, the breeding methods and matters needing attention of hydroponic happiness tree

In life, when it comes to indoor plants with beautiful names, everyone will think of happiness trees, wealth trees, rich trees and so on. In theory, any plant can be hydroponically cultured, and this is also true for the happiness tree, so how to raise the hydroponic happiness tree? The following are the cultivation methods and matters needing attention of the hydroponic happiness tree carefully arranged by the editor, come in and have a look!

1. Nutrient solution is the key to the cultivation of hydroponic happiness trees.

To raise a happiness tree indoors, besides being beautiful, the most important thing is to be clean. When it comes to this, people will think of hydroponics, such as hydroponic happiness trees. As for how to raise the hydroponic happiness tree, compared with the potted happiness tree, we only need to dissolve the nutrients it needs in the water, and the plant can grow normally. Let's take a look at the cultivation methods and matters needing attention of the hydroponic happiness tree.

2. Culture methods and matters needing attention of hydroponic happiness tree

Materials: glass container, plastic seedling grid, clear water, nutrient solution

1. Select plants

If you want to cultivate a happiness tree in water, you need to choose a suitable happiness tree. In this regard, the editor recommends: a small happiness tree, and is a strong and luxuriant plant, free from diseases and insect pests.

2. Root washing

How to cultivate the hydroponic happiness tree? after selecting the plant, begin to wash the roots. Take the little happiness tree out of the flowerpot, remove all the soil from the roots, and then clean the roots of the plant, which can be washed several times.

Note: the roots of the happiness tree are fragile, so you must be careful not to hurt the roots when washing the roots. In this regard, we can use carbendazim and other drugs to kill bacteria for once to prevent the emergence of rotten roots of happiness trees.

3. Hydroponic culture begins

With the above preparation, the hydroponic happiness tree can begin. Put the root of the little happiness tree through a prepared hydroponic glass container, preferably with a plastic seedling grid. Then fill the container with clean water of 2 stroke 3, and then soak the root 1 stroke 3 into the water.

4. Change water

With regard to the cultivation method of hydroponic happiness tree, after completing the above steps, the most important thing is to change the water. To cultivate a happiness tree in water, you must be willing to change the water once a week until it has enough new roots.

Note: when changing water, wash the container and replace it with a special nutrient solution, hold 2/3 of the same volume, and update the nutrient solution regularly. In addition, when the temperature is high in summer, you should stop adding nutrient solution to prevent rotting roots.

5. Lighting

Happiness tree likes light, although it is hydroponic, but in the light, it is also needed. Although the happiness tree is shade-tolerant, sufficient light can make the happiness tree greener leaves and grow more luxuriantly. Note: the light should not be too strong, otherwise it will easily lead to yellowing of the leaves of the happiness tree.

Generally speaking, hydroponic happiness tree is still very simple, as long as we pay attention to disinfection, and then timely change of water, to ensure nutrition. With regard to the cultivation methods and matters needing attention of hydroponic happiness trees, the editor will introduce them here. If you like to raise happiness trees cleanly and are not afraid of trouble, the editor recommends water cultivation.

Can the happiness tree be raised by water? Methods of hydroponic Culture and key points of Culture Management of Happiness Tree

Happiness tree is a common ornamental plant, we must be very curious about whether happiness tree can be cultured in water, in fact, in theory, all plants can be cultured in water, because the nutrients plants need are nutrients dissolved in water. As long as the nutrient solution of happiness tree is good, let's take a look at the hydroponic culture method of happiness tree.

Hydroponic Culture method of Happiness Tree

1. Aquaculture: if Happiness trees want to be cultured in hydroponics, they must first choose healthy plants without disease. Then remove the soil from the root, wash it with clean water, wash it several times, and try not to hurt the root. Before that, you can use carbendazim and other drugs to kill the bacteria, which is not easy to rot. The root is passed through the plastic seedling grid attached to the hydroponic glass container. If it is too small, the grid can be cut larger, and the container contains 2/3 volume of water, and the root is divided into three parts and immersed in water.

2. Change water in time: hydroponic culture of Happiness Tree must pay attention to changing water once a week until it grows enough new roots, wash the container, replace it with a special nutrient solution, hold 2/3 of the same volume, and update the nutrient solution regularly.

The reason for the loss of leaves in the happiness tree

1. Water reason: one of the most common reasons in life is how much water is watered. We know that Happiness Tree is still a kind of plant that likes water, but too much and how much will cause Happiness Tree to lose its leaves. If you are lazy, it always takes a week to think of watering. At this time, the soil is too dry and the root system is fragile. If you water too much, it will damage the root system and hinder the growth of leaves, thus falling. But usually do not overwater to avoid rotting roots.

2. lighting reason: all plants need light to ensure their growth. if you put the happiness tree in the shade for a long time, it will make it unhappy, especially in winter, especially in winter. of course, you can't always bask in the sun in hot summer to prevent leaf burns.

3. Temperature reason: happiness tree likes warm and warm environment, and the suitable temperature for growth is 20 ℃ to 30 ℃. In the hot summer, we need to pay attention to moisturizing, to give appropriate shade, to increase the environment and foliar spray, in the north we should pay attention to the temperature, put the happiness tree in the house with suitable temperature.

4. fertilizer reasons: potted bean trees should not only be required to add an appropriate amount of rotten cake fertilizer and 3% multi-component compound fertilizer to the culture soil, but also should be given topdressing continuously. Quick-acting liquid fertilizer can be applied once a month during the growing season, and rotten cake fertilizer and water can usually be used. A small number of potted plants in the family, or large potted plants displayed in public places for a long time, can be buried regularly with a small amount of multi-component slow-release compound fertilizer particles, or 0.2% urea and 0.1% potassium dihydrogen phosphate mixed solution.

The cultivation method of Happiness Tree

1. Temperature: the happiness tree likes a warm and humid environment, and temperature is the most important. The temperature during the day is controlled between 19 ℃-21 ℃ and at night between 18 ℃-20 ℃, which is the most suitable temperature for growth. Too high or too low will affect its growth. Try to keep the temperature below 27 ℃ in hot summer. When the ambient temperature is very high, it is necessary to use a shed for shade. Increase the humidity of the environment, thus increasing the humidity of the leaf surface. When in winter, the temperature should not be less than 8 degrees and the humidity should not be less than 5 degrees, otherwise the temperature will be frostbitten.

2. Humidity: the happiness tree likes to be moist to the soil environment and indoor environment. The humidity in the room is controlled between 70 and 80%. The humidity can not be controlled in the large banquet hall, we spray the leaves once in the morning and evening, if the humidity is too low or in a dry environment for a long time, the leaves will curl and turn yellow, affecting the ornamental.

3. Illumination: the Happiness Tree is a kind of plant that likes sunshine and can endure shade. It is very important in light. Happiness Tree likes to grow in a semi-shady environment. In the north, we usually keep it indoors, so there is no problem of direct sunlight. I am afraid that if I keep it in a dark place for a long time, where both direct and scattered light can not be illuminated, when the time is long, the leaves will fall off. So winter should be placed on the balcony or sunny window to enrich the light.

4. Watering: when it comes to summer, potted happiness trees should be watered every 3 to 4 days, but it also depends on individual conditions. In winter, the happiness tree almost stops growing indoors in the north, and watering should be controlled in the basin soil. Water it thoroughly. If you don't water it, you can't pour a drop of water into the basin. This is the principle, please remember.

5. Pruning: the purpose of cultivating Happy trees is to watch and set off the indoor environment. If the tree does not look like it, it is not beautiful, so it should be pruned attentively, generally in the shape of mushrooms or round piles. Cut off some old leaves and yellow leaves.

6. Soil: when a happiness tree is growing, soil is equally important. Choose soil that is loose, breathable, well drained and nutritious. It is usually prepared with the ratio of garden soil: rotten leaf soil: rotten organic fertilizer: River sand = 5 to keep the soil loosened once a month during the growing season to ensure that its roots are always in a good state of permeability. If it is found that there is stagnant water in the basin, it should be removed as soon as possible, and the basin soil should be turned over and changed after the basin soil is dry, so as to keep the happiness tree growing better.

7. Fertilization: fertilize the happiness tree frequently during the growing period to ensure the exuberant growth of the happiness tree. Compound fertilizer or nitrogen, phosphorus and potassium 20:10:10 or farm fertilizer can be stopped in winter.

8. Disease prevention: to deal with the pests on the happy tree, there are generally shell insects, mites, aphids, scale must-die, parathion, paracetamol, zinc parathion, omethoate, and dimethoate. As long as it is ventilated and ventilated frequently, there will be no pests in general. The disease resistance of the happiness tree is still very strong. If the pest is not serious, it can be removed by hand.

Can Happiness Tree be cultured in Water? methods of hydroponic Culture of Happiness Tree

Everyone must be particularly curious about whether the happiness tree can be cultured in water. In fact, in theory, all plants can be cultured in water, because the nutrients needed by plants are nutrients dissolved in water, as long as the nutrient solution of the happiness tree is well prepared. And many flower lovers have also successfully hydroponized the cactus and cactus. At present, the common hydroponic flowers are red cactus, hanging orchid, green pineapple and so on, so can the happiness tree be hydroponically cultured? The method of hydroponic culture of Happiness Tree is introduced in detail in this paper.

The method of hydroponic Culture of Happiness Tree

In order to cultivate happiness trees in hydroponics, we must first choose healthy plants without disease. Then remove the soil from the root, wash it with clean water, wash it several times, and try not to hurt the root. (before that, you can kill the bacteria once with carbendazim and other drugs, and it is not easy to rot the root.) pass the root through the plastic seedling grid attached to the hydroponic glass container. If it is too small, you can cut the grid a little bigger, hold 2/3 volume of water in the container, and soak the root into three parts.

The hydroponic culture of Happiness Tree must pay attention to changing the water once a week until it grows enough new roots (aquatic roots), wash the container, replace it with a special nutrient solution (the concentration must be as required), hold 2/3 of the same volume, and update the nutrient solution regularly.