It is very important how to plant one-leaf orchid in different pots and how to make one-leaf orchid burst pot / matrix well.
In the process of planting one-leaf orchid, as long as the breeding method of one-leaf orchid is scientific, it will grow very rapidly, and it can flourish after a period of time, so how can it be planted in different pots at this time? I'm afraid it will become a problem that flower friends need to think about. The following editor will tell you a simple method.
How to plant one-leaf orchid in pots
1. Time of basin division
Due to the low temperature in winter and high temperature in summer, the time to divide the basin is generally chosen in spring, that is, from February to March, which is the time to change the basin, and the two can be combined together.
2. The method of dividing the basin
Take the mother plant of a leaf orchid from the flowerpot and cut it longitudinally from the root with a tool to divide it into several clumps, each with 3 plants, and ensure that there are 3-5 strong leaves on the plant.
The roots of the sub-plants were soaked in 1500 times chlorothalonil solution for 5 minutes. This process is root disinfection, which can kill eggs and germs and reduce the occurrence of diseases and insect pests after planting.
3. Upper basin
Plant the dried seed plants in the new basin soil, pay attention to put 3 cm thick base fertilizer at the bottom of the basin, and put some foam or tiles at the drainage hole to increase drainage. After planting, you need to water once. You must make sure that the whole soil is thoroughly watered, and then leave it in a semi-shady and ventilated place for maintenance.
Does a leaf orchid use a large basin or a small basin?
When dividing the pot, the size of the flowerpot selected depends on the height and growth of the plant. Generally, small pots are the main ones, and large pots require a lot of soil, so the amount needed in watering and fertilization will be more, and it is more difficult to maintain than small pots. It is also not conducive to growth, so do not choose large pots to raise small plants.
How to make a leaf orchid burst into a pot
1. The matrix should be selected.
If the next leaf orchid burst basin, the matrix needs to be made of relatively high quality soil, which can be made of peat, perlite and ceramsite in the proportion of 40%, 40% and 20%, or pond mud and rotten leaf soil. good soil conditions are the basis for the explosion of a leaf orchid.
2. Proper lighting
Neither let the light be too strong, nor let the leaf orchid lack the light, it is best to plant it in a bright place, so everyone needs to put the leaf orchid in the right place according to the situation of his own home.
How to plant one-leaf orchid in different pots
Split time of one-leaf orchid
The ramets of Cymbidium can be divided in combination with changing pots after the temperature warms up in spring and before new buds germinate. It is usually carried out after the soil is thawed in February to March.
Isolating method of one-leaf orchid
Take the mother plant out of the flowerpot, shake off the excess soil, and separate the roots as much as possible.
Separate the plants with a sharp knife to ensure that each plant has a certain root system. Then it is to trim the leaves to ensure that each clump has 3 to 5 leaves, which is conducive to survival.
One-leaf orchid basin disinfection
Soak the split plants in 1500 times chlorothalonil for five minutes, then take them out and dry them, and then replant them, but the soil should also be disinfected before planting.
One-leaf orchid on the pot
Before planting, put a coarse substrate 2cm thick as a filter layer at the bottom of the basin, and then put in the plant. Pour water once after the basin, and then put it in a shaded place for maintenance.
Maintenance of one-leaf orchid after split
After ramet, the root system is damaged to a certain extent, and the absorption capacity is also weakened, and it takes about 3-4 weeks to recover, so watering should be controlled before this so as not to cause rotting roots. However, after ramet, the growth of leaves did not have a great effect. In order to maintain the water balance of leaves, it was necessary to spray the leaves one or three times a day. There is no need to apply fertilizer after the split, so be careful not to get too strong in the sun.
How to raise a leaf orchid? Culture methods and matters needing attention of Cymbidium chinense
Picture: one-leaf orchid culture
[FAQ] how to raise one-leaf orchid? Culture methods and matters needing attention of Cymbidium chinense
[expert answers]
Mode of reproduction: the method of plant division is used, which can be carried out in March in spring. Dig the big clump of plants out of the soil, gently shake off the soil, and cut it with a sharp knife according to the trend of the rhizome. Each clump of rhizome should have 8 buds and 9 buds. The split one-leaf orchid plant can be planted after half a day of air-drying in the shade.
Production cycle: it takes about 6 months from the planting of the new plant to the harvest of the finished product. In the future, the finished products can be harvested one after another, and the old plants should be renewed after 3 years or so, when the clumps of orchids can be replanted.
Cultivation location: it should be planted in greenhouse in the north of our country and open to heaven and earth in the south. The cultivation site should receive direct sunlight for not less than 2 hours a day.
Matrix: Sandy loam rich in humus should be selected.
Planting: the planting density is 912 plants per square meter, and the seedlings are planted at equal intervals.
Watering: one-leaf orchid likes to moist the soil, but should be careful not to make the soil waterlogged, otherwise the rhizome of one-leaf orchid is easy to rot.
Fertilization: before planting, rotten leaves can be used as base fertilizer, the dosage is 2 kg per square meter, and the base fertilizer should be turned evenly into the soil. In the vigorous growth stage of spring, summer and autumn, the plant should be topdressing with thin fertilizer and water once a week, and fertilizer should be stopped in winter.
Illumination: the orchid grows well in the bright place where there is no direct sunlight, and the shading net can be used for its shading. in the period of high temperature in summer and autumn, do not make the plant accept direct sunlight, otherwise unfading yellow patches will appear on its leaves, which slows down its growth rate and decreases its ornamental value.
Ventilation: keep the environment properly ventilated when the growth is exuberant. Because the orchid grows slowly in winter, this operation can be avoided at that time.
Temperature: one leaf orchid likes to be warm, avoid severe cold. The ambient temperature should be kept between 15 and 25 ℃, and the overwintering temperature should not be lower than 5 ℃.
Note:
1. The orchid should be fully watered during the growing season, keep the basin soil moist, and often spray water to the leaves to facilitate sprouting and growing new leaves, and the amount of water can be reduced appropriately after the end of autumn.
2. Liquid fertilizer was applied once or twice a month during the peak growth period in spring and summer to ensure that the leaves were beautiful and bright. It can be cultivated in bright indoor areas all the year round, but it can not be placed in direct sunlight, either indoors or outdoors; short-term sunlight exposure may also cause leaf burns and reduce ornamental value.
[editor's comments] many people are asking how to raise a leaf orchid. These are the breeding methods and points for attention that the first Agricultural Classic editor shared with you. Now you know how to raise one leaf orchid, and interested friends can also do it. Raise a pot on your own, change the mood is also good!
- Prev
How to raise pitcher plants, the breeding methods and matters needing attention / light must be sufficient
For pitcher plant, we should have heard that it is a plant that preys on mosquitoes, flies and other insects. With the careful cultivation of breeding experts, pitcher plants gradually come into human life and become a kind of indoor potted plants. how to raise pitcher plants? The following are the breeding methods and matters needing attention of the pitcher plant carefully arranged by the editor.
- Next
How does Nepenthes overwinter, Nepenthes overwinter method detailed explanation/away from the window to increase the temperature
Nepenthes, a very special plant, it grew a lot of pig cages, there are mosquito, fly capture function. Nepenthes is also the effect of life, many people will raise it, but because Nepenthes grow in tropical areas, it likes high temperature, not cold, so winter maintenance must pay attention to
Related
- Fuxing push coffee new agricultural production and marketing class: lack of small-scale processing plants
- Jujube rice field leisure farm deep ploughing Yilan for five years to create a space for organic food and play
- Nongyu Farm-A trial of organic papaya for brave women with advanced technology
- Four points for attention in the prevention and control of diseases and insect pests of edible fungi
- How to add nutrient solution to Edible Fungi
- Is there any good way to control edible fungus mites?
- Open Inoculation Technology of Edible Fungi
- Is there any clever way to use fertilizer for edible fungus in winter?
- What agents are used to kill the pathogens of edible fungi in the mushroom shed?
- Rapid drying of Edible Fungi