Tiger tail orchid leaves rotten how to do, six reasons make the leaves yellow rot / with a solution

We know that one of the functions and functions of the tiger tail orchid is to watch the leaves, and it is also named for the tiger pattern on the leaves, but in breeding, it will cause the leaves to wither, yellowing or even rot for various reasons, so that its ornamental quality will be greatly reduced. What if the leaves of the tiger tail orchid rot? The editor sorted out several common causes and solutions.

What if the leaves of Tiger tail Orchid are rotten?

1. Watering reason

Most of the varieties of tiger tail orchid are relatively resistant to drought and avoid waterlogging, so it is recommended to dry rather than wet when watering at ordinary times, and sometimes the soil is too moist because of the rainy season, poor soil drainage and too much watering. As a result, the absorption of water and nutrients by the roots is blocked, first the leaves wither and turn yellow, and then they may rot.

Solution: reduce the number of watering, usually watering pay attention to observe the soil moist condition, generally when the soil surface is dry, do not repeat frequent watering, and the method has been described in detail in the tiger tail orchid how to water, flower friends can be used as a reference.

2. Lighting problem

Cymbidium is a shade-tolerant plant, which can survive in the dark for a long time, but if it is lack of light for a long time, it will cause some leaves to wither and rot due to lack of photosynthesis. In addition, if the light is too strong, such as the sun exposure in the middle of summer, it may also cause the leaves to burn and rot.

Solution: what if the leaves of the tiger tail orchid caused by the lighting problem are rotten? Usually need to ensure that the tiger tail orchid in the environment of moderate light, neither let it be direct sunlight in the summer, nor let it stay in the dark environment for a long time, as long as there is a certain scattered light can avoid the phenomenon of leaf rot.

3. Temperature problem

Tiger tail orchid has many advantages, such as drought tolerance, shade tolerance and so on, but it also has some weaknesses, that is, it is weak in cold tolerance, it will stop growing when the temperature is below 10 degrees, and often below 5 degrees may be frostbitten, then some leaves may fall off and rot.

Solution: the temperature in spring, summer and autumn generally does not cause leaf decay, and frostbite occurs only when the temperature is low in winter and there is no heat preservation, so it is best to keep it indoors in winter. but avoid the air outlet of air conditioning and heating.

4. Soil problems

In fact, tiger tail orchid has the lowest requirements for soil, but it also has the most basic requirements, that is, air permeability, good drainage, no germs and insect eggs, and so on. If the soil is hardened or contains germs, it will make the roots of tiger tail orchid grow poorly and the leaves will rot.

Solution: remove the orchid from the basin and plant it with healthy and loose soil. in addition, pay attention to disinfecting the soil, at least to ensure that the soil is dried in the sun and then used. If possible, rotten leaf soil, garden soil and sand can be used to make culture soil.

5. Fertilization

When fertilizing, the best way is to put the fertilizer into the water, and then irrigate the soil along the edge of the flowerpot, do not pour the fertilizer and water from the leaves, once a large amount of fertilizer and water is scattered in the leaf clusters, the leaves will rot because of fertilizer damage. In addition, too high concentration of fertilizer and water will also cause this problem.

Solution: correct and reasonable fertilization, do not apply a large number of frequent fertilizers even during the growing season, do not touch the foliage when applying fertilizer, and water immediately if excessive fertilizer is applied, so that the excess fertilizer can flow out of the drain hole as soon as possible.

6. the problem of diseases and insect pests

Tiger-tailed orchid is vulnerable to soft rot, spot disease, anthrax, sagittal scale and so on. Once these diseases and insect pests appear, its leaves will have disease spots, and some diseases will also lead to leaf rot. The causes of these diseases and insect pests include growth environment, breeding methods and so on, which need to be controlled in time.

Solution: usually do a good job of maintenance and management, ensure good environmental ventilation, moderate temperature and humidity, pay attention to observe the changes of leaf color, if disease spots need timely spraying, commonly used drugs are dimethoate EC, malathion EC and so on.

What about the tiger Pilan leaves? the solution to the yellowing and softening of the tiger Pilan leaves

Tiger skin orchid is a very common potted plant, although no other flowers and plants can have beautiful flowers, but its leaves are tough and unique, which can improve the environment and purify the air at the same time, so people especially like to plant tiger skin orchid. However, some friends raised tiger Pilan for a few days and had the problem of yellowing and softening of leaves. Let's discuss with the editor what caused it.

What if the leaves of Tiger Pilan are gone?

The leaves of tiger orchid become soft, the leaves of tiger tail orchid turn yellow, the leaves of tiger tail orchid rot, the leaves of tiger tail orchid wither, the leaves of tiger tail orchid are dry and curled, and the above conditions such as drought resistance and disease resistance are basically related to dampness or excessive watering. First of all, check whether the basin soil is too wet, we should use a loose and breathable sand map to prevent the basin soil from stagnant water, which can easily lead to root rot in the case of high temperature and excessive humidity. Causing the patch to soften.

Secondly, we must pay attention to watering not to let the water get wet on the leaves, and do not spray water on the page to prevent stagnant water in the center of the leaves. If there is such a situation, you should put it in a ventilated place to let the leaves dry as soon as possible, and cut off the rotten and yellowing leaves.

In addition, pay attention to the application of thin fertilizer, if a dark green, yellow arts and science is not obvious, basically excessive fertilization leads to leaf burning curl and often dry black. The treatment method is to pour a large amount of water at one time under the condition of ensuring the good permeability of the basin soil, let the water dilute the fertilizer of the basin soil, and immediately put it in the ventilated place to let the basin soil dry as soon as possible. If the permeability of the basin soil is not very good, the basin soil should be changed and some of the basin soil should be removed and replaced with a new loose basin soil.

The solution to the yellowing and softening of tiger skin orchid leaves

1. Pay attention to the growth temperature

The growth temperature of tiger skin orchid should be controlled between 16 and 30 ℃, and the corresponding heat preservation measures should be given in winter. Generally, frost injury will occur when the temperature is less than 5 ℃, and the leaves will be soft. You can put the plant in the sun, appropriately increase the plant temperature, and gradually recover.

Tiger Pilan likes warmth and is suitable to grow at a temperature of 16-30 degrees Celsius. Some anti-freezing measures should be given in winter. Generally, freezing injury occurs when the temperature is less than 5 degrees, which can be placed in the sun to increase the plant temperature.

2. Control the amount of water pouring

The basin soil should be kept moist in spring and summer, but not stagnant water, and should be watered after the basin soil is completely dry in autumn and winter. Daily water can be used to clean the leaves to keep the plant beautiful and make the plant grow better. Do not water when the winter temperature is lower than 10 ℃, so as to avoid freezing damage. Watering should be in the morning or in the evening.

3. Prevention of diseases and insect pests

When watering, you should avoid splashing on the leaves, find diseased leaves, remove them and destroy them in time. When you get sick, you can spray 12% green copper 600x solution or 72% agricultural streptomycin 4000 times solution. Spray once every 7 days and 3 times in a row.

The reason why the tiger skin orchid does not grow tall

Tiger skin orchid is not tall may be the reason for the variety, because some species of tiger skin orchid can not grow very tall, some tiger skin orchid is a dwarf variety, the highest is less than 20cm, so it itself can not grow tall. But sometimes, the growth of tiger skin orchid is a matter of conservation, not of breed.

First of all, it may be the problem of temperature. When the temperature is too high or too low, such as keeping it below 10 ℃ or more than 30 ℃ for a long time, it will lead to poor growth and will not grow tall naturally.

The second may be the impact of care, most people are indoor breeding tiger skin orchid, see little light, some even almost no sunlight, which will have an adverse impact on the growth of tiger skin orchid, so that it does not grow tall.

Another reason is that there is something wrong with the root of Tiger Pilan, which mainly means that the root of Tiger Pilan is rotten. The root rot of Tiger Pilan is mostly caused by improper watering. If it is watered too much, it will lead to too much water in the soil of Tiger Pilan, resulting in root rot and affecting its growth.

The last reason is that tiger skin orchid fertilizes too little during the growth period, so that it does not have sufficient nutrients, does not grow vigorously, and does not grow tall.

The functional value of Tiger Pilan

1. Tiger skin orchid can decorate the home

Put a small basin of tiger Pilan on the coffee table, if it is a large basin, you can put it on the edge of the sofa, or in front of the floor-to-ceiling window, it makes people feel very harmonious and alive. If in the corner of the living room with a basin of chic tiger skin orchid, it will also make your living room more simple and unadorned. Of course, put Tiger Pilan on the dining table, kitchen, bathroom, you, more concise style of home.

2. Tiger Pilan can purify the air

The stomata on the fleshy stem of Tiger Pilan are closed during the day and open at night, which can release a large number of negative ions while absorbing carbon dioxide, increasing the concentration of negative ions in the indoor air. Moreover, Tiger Pilan also has an important role in radiation protection, which is suitable for display next to computers and televisions.

3. Tiger Pilan can be used as medicine.

Tiger Pilan also has high medicinal value and has been recorded in many medical books. Tiger skin orchid as a medicine, can clear heat and detoxification, the treatment of cold and cough, bronchitis, injury and other conditions.

Through the above content, I believe you have a more in-depth understanding of tiger skin orchid culture technology. In fact, plant culture for a long time, there will be all kinds of problems, as long as understand the reasons, and then prescribe the right medicine, basically there will be no problem.

The reason for the softening of tiger Pilan leaves what should I do?

The tiger tail orchid is a common family potted plant, and it is a perennial evergreen herb of the genus Liliaceae. The leaves often become soft in the process of breeding. In fact, the softening of the leaves of the tiger tail orchid is mainly caused by strong light, too much watering, low temperature and bacterial soft rot. Let's take a look at what to do if the leaves become soft.

Strong light in direct sunlight

[reason] Tiger skin orchid is a relatively shade-tolerant plant, which can be cultured under astigmatism, or in places where the light is not very strong, if the sun is exposed to the sun, it will lead to sunburn, softening leaves, and so on.

[method] Tiger Pilan likes the light, so it must be kept in contact with the sun, preferably in a place where it can be directly irradiated. If the conditions do not permit, it should also be placed in a place close to the sun and placed in a dark place for a long time. It will cause the leaves to turn yellow.

Frequent watering

[reason] the root system of tiger skin orchid is underdeveloped, and watering too frequently can easily lead to lack of oxygen and rot of the root system, and then cause the leaves to become soft.

[methods] Tiger Pilan watering should grasp the principle of dry rather than wet, properly watering new plants at the root neck in spring to keep the basin soil moist, and do not let water accumulate in the basin in the rainy season. Usually, clean water can be used to scrub the foliar dust to keep the leaves clean and bright. Generally speaking, if the soil is relatively loose, it is watered twice a week, and the weather is colder in winter. It only needs to be watered once.

The temperature is too low

[reason] Tiger Pilan likes a warm environment. If the temperature is too low, Tiger Pilan will grow and appear.

[methods] Hupilan has a high requirement for temperature. The suitable temperature for its growth is 20-30 ℃. If it is below 13 ℃, it will stop growing. The lowest temperature in winter should not be lower than 10 ℃, otherwise the base of the plant will rot and the whole plant will die.

Bacterial soft rot

[reason] after the leaves were damaged by bacterial soft rot, the leaves were light yellowish green or grayish yellow, and water-stained soft rot spots appeared on the stems on the ground, which were easy to break. The rhizome is yellow and soft rotten, and the root is dead.

[methods] when watering, you should avoid splashing on the leaves, find the diseased leaves, remove them and destroy them in time. When you get sick, you can spray 12% green copper 600x solution or 72% agricultural streptomycin 4000 times solution. Spray once every 7 days and 3 times in a row.