MySheen

What to do when the leaves of the orchids turn yellow, apply thin fertilizer/control the amount of watering/avoid strong light

Published: 2024-11-09 Author: mysheen
Last Updated: 2024/11/09, Crucifera is a kind of ornamental flower plant, which can be potted or planted in large areas. However, ornamental plants will also affect their overall beauty if their leaves are yellow. So what if the leaves turn yellow? The following small series takes everyone to understand

Wenshu orchid is a kind of highly ornamental flower plant, which can not only be potted, but also can be planted in a large area. However, no matter how high the ornamental plant, if the leaves turn yellow, it will also affect its overall beauty. What if the Manjusri leaves turn yellow? Next, the editor will take you to learn about it.

First, what if the leaves of Wenshulan turn yellow? find the reason.

If we want to know what to do when the leaves of Wenshu orchid turn yellow, we must first understand what causes it. Only by finding the cause can we solve the problem pertinently. Such as improper watering and fertilization, too strong light may cause this phenomenon, as for the specific solutions are described in detail below, let's take a look.

2. The treatment of yellowing of Wenshu orchid leaves.

1. Improper fertilization and frequent application of thin fertilizer

Fertilizer is one of the main nutrients of Wenshu orchid, but it is more fastidious when applying fertilizer, if it is applied too little, it will make the leaves yellow because of insufficient nutrients, and it is easy to burn plants if thick fertilizer is applied directly.

Solution: after entering the growing period, Wenshu orchid has a high demand for fertilizer, which basically needs to be fertilized every two weeks, and we should follow the principle of applying thin fertilizer frequently when fertilizing it, and the fertilizer must be diluted before fertilization.

two。 Improper watering, control the amount of water.

In the process of cultivating Wenshu orchids, watering is also a point that needs to be paid attention to. If too much watering causes stagnant water, it is easy to cause rotting roots, and if too little watering, it will also cause Manjusri leaves to turn yellow, so the frequency of different seasons is very important.

Solution: the water demand of Wenshulan is different in each period. Before sprouting, we need to keep the soil as moist as possible. After its budding, we need to gradually reduce the amount of water and keep the soil surface as dry as possible. This can prevent diseases and insect pests to a certain extent.

3. The light is so strong that it is kept in the semi-shade in summer.

Wenshu orchids prefer light, but they are not tolerant to strong light, especially when the summer light is relatively strong, if we cultivate it directly in the sun, it will burn the plants because the light is too strong, thus causing the leaves of Manjushri to turn yellow.

Solution: when the light is more suitable in spring and autumn, we can keep it outside and let it receive light all day. However, when the summer sun is too strong, it is best to move it to the indoor semi-shade for breeding.

4. Do not delay timely prevention and control of diseases and insect pests

The emergence of diseases and insect pests is also one of the reasons for the yellowing of Manjusri leaves, many diseases and insect pests will cause this phenomenon, and in serious cases, it will also lead to the phenomenon of plant death.

Solution: if this phenomenon is caused by diseases and insect pests, then we must deal with it in time, because the longer the time drags on, the more difficult it is to prevent and cure. As for the specific treatment methods, the editor has introduced the pest control of Wenshulan, which we can learn about.

Culture method of Anthurium andraeanum (summary of successful experience)

Red palm flowers in full bloom, scarlet dazzling, fresh green leaves, aquaculture in the glass bottle looks clear and clear, pleasing to the eye, who would not like such flowers? The flower shape of Anthurium andraeanum is similar to that of goose palm, it is often called goose palm red, and some people call it Anzu flower. The following will focus on the culture methods of hydroponic andrographis andraeanum, the culture methods of family Anthurium andraeanum and some common points for attention of Anthurium andraeanum.

Click on the picture to see how to grow potted Anthurium andraeanum

Open Anthurium andraeanum

I. the culture method of hydroponic Anthurium andraeanum

The blooming Anthurium andraeanum stands quietly in the water, below is the pure root system, above is the lively flower, looks makes the person feel full of joy, relaxed and happy. Among the foliage hydroponic plants, the hydroponic culture of Anthurium andraeanum is relatively difficult. The phenomenon of rotting root is easy to occur. This is related to the characteristics of Anthurium andraeanum itself. The root of Anthurium andraeanum belongs to aerial root, which is more sensitive to the ventilation of the environment. If you want to raise Anthurium andraeanum well, you must control the number of times of changing water and the capacity of filling water. The amount of dissolved oxygen in water and so on.

The editor reminded: hydroponic Anthurium andraeanum must choose the nutrient solution suitable for the growth of Anthurium andraeanum, have appropriate light and temperature, and maintain it carefully.

Http://m.to8to.com/yezhu/1. Nutrient solution suitable for Anthurium andraeanum survival

It is recommended to choose foliage plant nutrient solution. The http://m.to8to.com/yezhu/1 must be replaced every 7-http://m.to8to.com/yezhu/10 days. Regularly changing the water of Anthurium andraeanum can remove the mucus and some algae secreted from the roots of Anthurium andraeanum. When the temperature is high in summer, it is more frequent to change water than in winter. It is recommended to change the water of Anthurium andraeanum every 2-3 days. The water should not be too full to prevent Anthurium andraeanum from rotting. It is best to keep about half of the roots of Anthurium andraeanum out of the water. It can ensure that the root system absorbs oxygen.

two。 Light and temperature needed for hydroponic Anthurium andraeanum

Anthurium andraeanum likes semi-overcast, warm and humid environment is also one of the requirements of Anthurium andraeanum growth environment. It is afraid of sun exposure, so it should pay special attention to the location in the process of breeding, preferably in a place where it is ventilated and can avoid strong light. In summer, hydroponic Anthurium andraeanum should pay attention to the temperature of the surrounding environment should not be higher than 28 degrees. The relative air humidity should be maintained at 80%, and sprinkle some water on the leaves of Anthurium andraeanum when the weather is dry. The temperature of Anthurium andraeanum in water culture in winter can not be lower than http://m.to8to.com/yezhu/14 degrees, when it is lower than this temperature, Anthurium andraeanum is prone to frost injury. Be careful to keep it warm and warm. And control the air humidity at about 80%, and must not put Anthurium andraeanum outdoors, otherwise it is easy to cause anthurium frostbite.

3. The way of increasing oxygen in hydroponic Anthurium andraeanum

The problem faced by hydroponic Anthurium andraeanum is that it will cause rotten roots of Anthurium andraeanum if there is little dissolved oxygen in water, so it is necessary to increase the oxygen content in water in time. The easiest way is to vibrate, fix the flower plant with one hand, and gently shake the http://m.to8to.com/yezhu/10 with the other hand. After shaking, the dissolved oxygen content of the nutrient solution can be increased by about 30%. Or add http://m.to8to.com/yezhu/1% hydrogen peroxide (3% hydrogen peroxide) to the nutrient solution, or use a miniature submersible pump or oxygenation pump to add oxygen to the nutrient solution if possible.

Editor reminded: when carrying on the hydroponic culture Anthurium andraeanum, can remove part of the original root, slightly remove the root. If you want to enhance the aquatic adaptability of the root system, you can seriously remove the root.

> > Click on the picture to view the treatment of rotten roots of Anthurium andraeanum in water culture.

Passionate red palm flowers bloom magnificently

2. Common problems in hydroponic culture of Anthurium andraeanum

What if the leaves of Anthurium andraeanum raised by http://m.to8to.com/yezhu/1 turn yellow in the water?

Answer: it is necessary to disinfect Anthurium andraeanum. It is recommended to buy hydroponic domestication solution in flower market to promote rooting. It is safe to grow flowers with it after dilution, the water temperature should be close to room temperature, tap water should not be used directly, and yellowed leaves should be trimmed off. Generally speaking, flowers have yellow leaves. Just trim them. When the flowers have new leaves, they are healthy.

2 hydroponic Anthurium andraeanum now the leaves and flowers are dry to death, how to do?

A: putting too much nutrient solution will cause leaves and flowers to change water, but don't put the nutrient solution yet.

(3) the water of Anthurium andraeanum which is often changed but hydroponically cultured smells, and some leaves turn yellow?

Answer: yellowing leaves can be identified as lack of nutrition. The stench of the water is caused by root rot. It is suggested to disinfect the roots and then add a special nutrient solution for hydroponics to improve it.

4 how to apply fertilizer for hydroponic Anthurium andraeanum?

Answer: hydroponic Anthurium andraeanum had better choose special liquid fertilizer of Anthurium andraeanum, because Anthurium andraeanum has a large demand for magnesium, so the general compound fertilizer is not only alkaline, but also has less magnesium content! After each change of water, drop 3 drops of http://m.to8to.com/yezhu/1 into the water, depending on the size of the container.

(5) the reason for the blackening of the root of Anthurium andraeanum in water culture.

Answer: hydroponic Anthurium andraeanum should be placed in a bright place in front of the window with diffuse light. Unlike soil flowers, hydroponic flowers cannot have direct light to illuminate their roots, otherwise they will inhibit the roots or cause photooxidation injury of the roots, resulting in blackening of the roots and loss of activity due to severe decay. You need to cut off the rotten roots and let them all soak in the nutrient solution.

Click on the picture to view the flower language of Anthurium andraeanum.

Spit fragrance in the sun

3. Culture methods of potted Anthurium andraeanum

Http://m.to8to.com/yezhu/1. Soil substrate of cultured Anthurium andraeanum

The soil matrix for planting Anthurium andraeanum must keep good permeability and no stagnant water. For family farming, you can choose to buy prepared culture soil in a horticultural store and add a mixture of ceramsite and dry bark (ceramsite: dry bark = 2: http://m.to8to.com/yezhu/1) as substrate. The substrate needs to be disinfected before planting to prevent Anthurium andraeanum from being affected by insect pests in the later stage of growth.

two。 Temperature requirements for cultivation of Anthurium andraeanum

The most suitable growth environment temperature of Anthurium andraeanum should be controlled between http://m.to8to.com/yezhu/14-35 degrees. In winter, when the temperature is lower than http://m.to8to.com/yezhu/10 degree, it is easy to cause red frost injury. Pay attention to keeping the anthurium warm and warming. In summer, when the temperature is higher than 35 degrees, you should humidify Anthurium andraeanum and spray water around it. Do this even if it is high temperature, but if the humidity is high, Anthurium andraeanum is not easy to be hurt.

3. How to fatten Anthurium andraeanum

Anthurium andraeanum has a higher demand for magnesium fertilizer than other foliage plants. When family farming fertilizes Anthurium andraeanum, it is recommended to buy Magic Kang fertilizer and apply it together with foliar fertilizer in the horticultural shop. Or the fully water-soluble compound fertilizer such as Huaduoduo universal fertilizer was diluted into 800-http://m.to8to.com/yezhu/1000 double liquid fertilizer and applied regularly (not less than http://m.to8to.com/yezhu/1 times a week). The principle of Anthurium andraeanum fertilization is to apply less thick fertilizer and frequently apply thin fertilizer.

4. Watering cycle

Water Anthurium andraeanum according to the dryness of the substrate in the basin. If the temperature is high in summer, it is recommended to water once every two days, and spray water to the leaves at noon to increase the relative humidity of the room. In winter, watering every 5-7 days is recommended. Watering in the cold season should be carried out between 9 am and 4 pm to avoid frostbite to the roots. Generally speaking, water can be watered every 3 days in spring and autumn. Avoid adding water when the plant is seriously short of water, which will affect the growth and development of Anthurium andraeanum. In the process of watering, dry and wet must be carried out alternately, do not water in the case of serious water shortage, this will affect its normal growth and development.

Click to view the moisture requirements of Anthurium andraeanum in different growth periods.

 
0