How to do the scorched edge of peacock bamboo taro leaves, 3 reasons and remedies / humidity should not be low

Peacock taro, named for the peacock feather pattern on the leaves, is a world-famous foliage plant, often placed indoors by flower friends. However, in indoor breeding, due to various reasons, there will be peacock taro leaves yellow, scorched edge situation, then peacock bamboo taro leaf scorched edge how to do? In this regard, the editor summed up three reasons, and attached remedies, let's go and have a look.

First, the peacock bamboo taro leaves scorched edge, find the reason

As a beautiful foliage plant, the beauty of peacock taro is mainly reflected in its evergreen leaves, so once the leaves appear scorched edge, it will seriously affect its ornamental value. As for the peacock bamboo taro leaf scorched edge how to do, find the reason, and then timely remedy. The following are the three reasons for the scorched edges of peacock bamboo taro leaves summarized by the editor. Let's move on.

Second, the reasons for the scorched edges of peacock bamboo taro leaves

1. The temperature is too low

According to the growth habits of peacock bamboo taro, we know that it likes high temperature environment, so in the maintenance process, attention should be paid to the regulation of temperature. Once in the maintenance, the temperature is too low, there will be peacock bamboo taro leaf scorched edge phenomenon.

Remedy: it is found that it is the cause of the low temperature. Move it to a place with a high temperature, and be careful not to move to a place where the temperature is too high.

2. Insufficient humidity

In addition to the high temperature, peacock taro also likes the growth environment of high humidity, and its basin soil and air should be kept at a high humidity. Once the humidity is not enough, can not meet the growth needs of peacock taro, it is bound to cause the phenomenon of leaf shrinkage.

Remedy: sprinkle water around the peacock taro in time to increase air humidity; in addition, when the air is dry, we must often spray water to the leaves to cool and moisturize.

3. Overwatering

Peacock bamboo taro likes a humid environment, so flower friends need to water frequently to keep the pot soil moist. But many flower friends are novice, and it is easy to have problems in the control of watering water, and there is often too much watering. Once there is too much water, there will be water in the peacock taro basin, which will lead to rotten roots, curly leaves and scorched edges.

Remedy: move the peacock taro to a ventilated astigmatism and let the water evaporate quickly.

Third, the solution to the scorched edge of peacock bamboo taro leaves

We all know the reason for the scorched edges of peacock bamboo taro leaves, and so do the temporary remedies. Next, let's take a look at the solution:

The focal edge is slight: first of all, we should ensure that the temperature and humidity are reasonable: the temperature should be kept at 16 and the humidity should reach 70% 80%. Pay attention to daily watering and do not allow water to accumulate in the basin.

The scorched edge is serious: flower friends can cover the plants with plastic bags and tie them tightly with a rope, leaving a little gap to moisturize and facilitate the recovery of the leaves.

What if the flowers wilt? Essence in our daily cultivation of potted flowers in the process of growth and development, it is often found that flowers wilt and other symptoms, due to environmental factors and flowers themselves, wilting phenomenon, so that the growth of flowers is inhibited, serious cases will make flowers die, measures must be taken for timely maintenance and rejuvenation. Flower wilting is a phenomenon often encountered by primary flower growers. There are many reasons for flower wilting, but in general, it is caused by lack of water. When the wilting of flowers is caused by too dry air, spraying water on the ground and leaves around the flowers three times a day will be enough to improve. When the wilting of flowers is caused by the lack of water in the basin soil, it is necessary to water the basin soil, but there is a particularly noteworthy problem here: watering the basin soil can only gradually increase the amount of water, not too much at once. This is because when the flower plant wilts, its root hair has shrunk and lost its function of absorbing water. At the same time, wilting has made the cells lose water, if the supply of water is suddenly too much. It separates the cell wall from the protoplast, so when plants suddenly inhale a large amount of water after drought, it can also lead to death. What if the flowers wilt? Potted flowers, due to less water in the basin, forget to water, especially in summer leakage watering, often cause leaf wilting, if not saved in time, the time will often lead to plant wilting. If it is not saved properly, it will sometimes cause plant death. The right thing to do is to immediately move the flowerpot to the shade when you find the leaves wilting, spray some water to the leaves, and pour a small amount of water. Later, as the stems and leaves gradually return to straight and straight, and then gradually increase the amount of water. If too much water is poured at this time, the plant may die. This is because a large number of root hairs of flowers are damaged after wilting, so the water absorption capacity is greatly reduced. Only after giving birth to new root hairs can the original water absorption capacity be restored. At the same time, wilting makes the cells lose water. After meeting the water, the cell wall absorbs water first and expands rapidly, and the protoplast absorbs water after it, and the expansion rate is slow. If a large amount of water is poured suddenly at this time, the plasmolemma will be separated and the protoplast will be damaged. Thus causing the death of flowers. What if the flowers wilt? The causes and remedial measures of pot wilting: 1. Dry wilting (dry weather, pot soil is too dry) flowers and trees can not be watered in time for a long time, wilting downwards from the top, and the cortical layer of branches shrinks until the whole plant dies. In this case, it is necessary to spray water on the leaves of arid flowers and trees and the surrounding environment to maintain high environmental humidity, and do not use a large amount of low-temperature water to irrigate the soil in a high-temperature environment. In the high temperature and dry season, the foliar water evaporation of flowers is larger, the basin soil dries early, there is no water supplement, and the plant is easy to wilt. At this time, the potted flowers should be moved to a cool place, and after the potted soil is slightly cool, the potted flowers should be watered thoroughly with water close to the soil temperature. Second, water wilting (overwatering, basin soil is too wet) the water content in the soil is too large, the respiration of plant roots is blocked or suffocated to death, branches and leaves can not get the water supply of roots, is bound to wilt or even wither. The damaged flowers and trees should avoid strong light and strong wind, cut off some twigs and leaves, and reduce water evaporation. The flowers and trees planted in the ground will loosen the soil in time. Potted flowers and trees, remove 1/3 of the over-wet pot soil, coupled with dry soil replanting, combined with foliar spray, spray thin liquid fertilizer every three days, such maintenance for 10 days, the injured flowers and trees can recover. Due to the excessive amount of watering, the basin soil is wet for a long time, or even stagnant water, the permeability of the basin soil is poor, the roots of flowers are injured, and the leaves of the whole plant wilt. At this time, we should stop watering and loosen the soil. If the situation is serious, take off the basin and change the soil, cut off the rotten roots, replant them, and keep them in a cool place. In fact, there is another situation related to water, that is, the water quality is too hard. When the flowers are watered with hard water for a long time, the soil is hardened due to alkalization, which hinders the water absorption of the roots and causes the plant to wilt. If you water the flowers with soft water, the situation will get better. Third, fertilizer wilting (excessive fertilization) the fertilizer concentration in the soil of flowers and trees is too high, which makes the water in flowers and trees permeate into the soil (that is, reverse osmosis), commonly known as root burning, resulting in wilting and even death of flowers and trees. The damaged flowers and trees planted in the ground can be irrigated to dilute the concentration of fertilizer in the soil and discharged in time. Potted flowers and trees, remove the topsoil in the pot, irrigate with water, so that too much fertilizer flows out of the lower part of the flowerpot with water, and then cover the basin with a layer of plain soil. At the same time, measures such as shading and foliar spraying were taken to maintain the life of the branches and leaves of the damaged flowers and trees, which could return to normal after 10 to 20 days. Potted flowers are overfertilized. Suffering from fertilizer damage, causing plant wilting. When this happens, you should immediately pour water into the basin, dilute the fat liquid, and raise the basin, so that the water can be discharged quickly from the basin hole. Potted flowers seriously affected by fertilizer should change pots to wash their roots. What if the flowers wilt? Fourth, insect wilting (disease and insect damage) when the harm of longicorn beetles and bugs is serious, the transport tissue of the trunk or main branches of flowers and trees is destroyed, resulting in local or whole plant wilting or death, and the wilting caused by insect pests is difficult to recover. Precious flowers and trees can be cut off for cutting or grafting. Underground pests bite the roots of plants, affect the water absorption of roots, and lead to the wilting of potted flowers. Potted flowers are invaded by Fusarium oxysporum, and their roots and stem bases are damaged and wilted. For diseases and insect pests, we should give priority to prevention, such as regular spraying, soil disinfection and so on. Once potted flowers wilt due to diseases and insect pests, it is generally difficult to cure. Fifth, wind wilting flowers and trees occur in new shoots, especially when spring shoots grow in large numbers, when they encounter strong light and strong wind (especially dry wind), flowers and trees often wilt. At this time, shading, wind shelter and foliar spray should be taken to prevent new shoots from losing water and wilting. Sixth, hot wilting (excessive light) flowers that like a cool environment in summer, if placed in a place with strong light and high temperature, the leaves will wilt and curl, or even wither and fall off. It should be put in a wet, ventilated and cool place immediately. If the flowers like shade or semi-shade, if the sun is not good or is directed by strong light, the leaves of the plant will wilt and curl, or even wither and fall off. At this time, the potted flowers should be put in a cool, ventilated and moist place. Seventh, cold wilting (temperature drop) autumn, the air temperature changes greatly, when the night temperature is lower than 10 ℃, like warm southern flowers, such as Magnolia, leaf flower, jasmine, Fusang, evergreen, peacock taro, etc., in the early morning leaves will wilt, noon temperature rise, and can gradually recover, at this time, potted flowers should pay attention to cold protection. The temperature fluctuates greatly in the north, and the temperature suddenly drops below 10 ℃ at night. Some southern flowers, such as Fusang, jasmine and rhododendron, wilt and lose their luster in the early morning, and gradually recover when the temperature rises at noon. Short-term cold wilting has little effect on flowers, but attention should be paid to keeping warm. What if the flowers wilt? How to rescue the wilting phenomenon of flowers and plants is the most headache for flower growers. There are many reasons for flower wilting, such as lack of water, fertilizer, light and temperature. They are not adapted to the acidity and alkalinity contained in the soil, excessive application of chemical fertilizer, infection of viruses, insect pests, damage by toxic gases in the air, and so on. The situation is very complicated, but most of them are caused by insufficient water. The way to make up for the wilting caused by the dry air is to spray water on the ground and leaves around the flowers 2 or 3 times a day. Some pots are short of water because flower growers water too little at a time, so they think it is enough to water the soil on the surface. as a result, the roots of the flowers do not absorb water. In fact, this is a big taboo of watering flowers, so for a long time, flowers will wilt because of lack of water. The remedy, of course, is to water the basin soil, but there is a particularly noteworthy problem: at this time, watering the basin soil can only gradually increase the amount of water, not too much at once. Because when the flower plant wilts, its root hair has shrunk, losing the function of absorbing water, at the same time, wilting has made the cell dehydrated, if the supply of water is suddenly too much, it will separate the cell wall from the protoplast wall, so when the plant suddenly inhales a large amount of water after drought, it can also lead to death. What if the flowers wilt? How to save flower wilting (how to do hot flower wilting)? During the Spring Festival, many people go out to visit relatives and go on holiday. When they return home, they often find their flowers wilting due to lack of water and other reasons. What should I do in such a situation? It's not a good idea to water a lot of flowers right away. It not only won't bring the flowers back to life, but may also harm them. The right thing to do is to immediately move the flowerpot to a cool place when you find the leaves wilting, spray some water to the leaves, and pour a small amount of water. Later, as the stems and leaves gradually return to straight and straight, and then gradually increase the amount of water. If too much water is poured at this time, the plant may die. This is because after the wilting of flowers, a large number of root hairs are damaged, so the water absorption capacity is greatly reduced. Only after giving birth to new root hairs can the original water absorption capacity be restored. At the same time, wilting makes the cells lose water. After meeting the water, the cell wall absorbs water first and expands rapidly, and the protoplast absorbs water after it, and the expansion rate is slow. If a large amount of water is poured suddenly at this time, the plasmolemma will be separated and the protoplast will be damaged, resulting in the death of flowers. It is hot in summer, and domestic flowers often wilt. The causes of flower wilting are various, such as lack of water, fertilizer, light, temperature and pH in the soil, excessive application of chemical fertilizer, infection of virus, insect pests, damage by toxic gases in the air, and so on. But in reality, most of them are caused by insufficient water. Due to the lack of water in the basin soil, it is often due to the fact that the amount of watering on the surface of the pot soil is too little, so that it is enough to water the surface of the basin soil. As a result, the roots of flowers can not absorb water, which is a big taboo for watering flowers. Flower growers call it "watering half a section of water". After a long time, flowers naturally wilt because they can't get water. The remedy, of course, is to water the basin soil, but pay special attention to: at this time, watering the basin soil can only gradually increase the amount of water, do not suddenly water too much, because when the flower plant wilts, its root hair has shrunk and lost the function of absorbing water. At the same time, wilting has made the cells lose water, if the supply of water is suddenly too much, it will separate the cell wall from the protoplast, so when plants suddenly inhale a large amount of water after drought, it will also lead to death. In addition, flowers will wilt because the air is too dry. The way to make up for it is to spray water on the ground and leaves around the flowers 2 or 3 times a day. What if the family potted flowers wilt?

What if the flowers wilt? How to save it? After many flowers bloom, they always wilt inexplicably. There are many reasons for the wilting of flowers, and the remedies are also different. So, what if the flowers wilt? How to save it? What if the editor of the succulent flower bed wilts below? How to save it? I'd like to introduce you!

What if the flowers wilt? How to save it?

Due to the wilting phenomenon due to environmental factors and flowers themselves, the growth of flowers is restrained, and in serious cases, flowers will die, so measures must be taken to maintain and rejuvenate them in time.

In general, first make sure that it is not dry, and do not water the petals when watering; then consider whether the water permeability of the matrix in the basin is good, the water permeability is not good, and long-term watering will cause rotten roots and cause withering; and then it is to ensure that the environmental ventilation conditions are good, so as not to cause the plant growth environment to be too wet and cause the plant to wither.

In this case, the loose culture medium should be replaced as soon as possible and placed in the ventilated place for observation, so that the foliar surface can be sprayed with appropriate amount of water. When the flowers fade, cut off the branches that have bloomed so as not to compete for nutrients.

1. Drought wilting

The flowers failed to be watered in time for a long period of drought, wilted downward from the top, and the cortex of the branches shrank until the whole plant withered. At this time, it is necessary to spray water on the leaves of flowers and the surrounding environment, maintain high environmental humidity, and do not use a large amount of low-temperature water to irrigate the soil in a high-temperature environment.

In addition, flower wilting is a common phenomenon when the weather is dry and the pot soil is too dry. in the high temperature and dry season, the foliar water evaporation of flowers is larger, the basin soil dries early, and there is no water supplement, the plant is easy to wilt. At this time, the potted flowers should be moved to a cool place, and after the potted soil is slightly cool, the potted flowers should be watered thoroughly with water close to the soil temperature.

2. Water wilting

When the water content in the soil is too large, the respiration of the plant roots is blocked and suffocated to death, and the branches and leaves can not get the water supply of the roots, resulting in wilting and dying. For injured flowers, it is necessary to avoid strong light and strong wind, cut off some twigs and leaves, and reduce water evaporation. Get rid of the over-wet basin soil, add dry soil and replant, combined with foliar spray, spray thin liquid fertilizer every 3 days. After 10 days of maintenance, the injured flowers can recover.

Usually in the process of novice flower cultivation, it is easy to water too much and the pot soil is too wet to cause the flowers to wilt. Due to the excessive amount of watering, the basin soil is in a wet state for a long time, even stagnant water, poor permeability of the basin soil, and injury to the roots of flowers. The whole plant leaves wilted together. At this time, we should stop watering and loosen the soil. If the situation is serious, take off the basin and change the soil, cut off the rotten roots, replant them, and keep them in a cool place.

When the flowers are watered with hard water for a long time, the soil is hardened due to alkalization, which hinders the water absorption of the roots and causes the plant to wilt. If you water the flowers with soft water, the situation will get better.

3. Wind wilting

New shoots of flowers, especially spring shoots, often wilt when they encounter strong light and strong wind. At this time, shading, wind shelter and foliar spraying should be taken to prevent the new shoots from wilting.

4. Hot wilting

Summer likes the cool environment of flowers, if placed in strong light, high temperature place, the leaves will appear wilting inner curl, or even withered and yellow shedding. It should be put in a wet, ventilated and cool place immediately.

5. Cold wilting

The temperature fluctuates greatly in winter, and the temperature suddenly drops below 10 ℃ at night. The leaves of flowers such as Fusang, jasmine and rhododendron wilt and lose their luster in the early morning, and gradually recover when the temperature rises at noon. Short-term cold wilting has little effect on flowers, but attention should be paid to keeping warm.

In autumn, the temperature changes greatly, when the night temperature is lower than 10 ℃, the warm southern flowers, such as Magnolia, leaf flower, jasmine, mulberry, evergreen, peacock taro, etc., will wilt in the early morning, and can gradually recover after the temperature rises at noon. At this time, potted flowers should pay attention to cold protection.

Underground pests bite the roots of plants, affect the water absorption of roots, and lead to the wilting of potted flowers. Potted flowers are invaded by Fusarium oxysporum, and their roots and stem bases are damaged and wilted. For diseases and insect pests, we should give priority to prevention, such as regular spraying, soil disinfection and so on. Once potted flowers wilt due to diseases and insect pests, it is generally difficult to cure. I hope this article can bring some help to you! Welcome to pay attention to the succulent flower bed for several times and learn more about family flower cultivation!