MySheen

How to trim Brazilian wood to look good, diagram of Brazilian wood pruning method / cut from top to bottom

Published: 2024-11-21 Author: mysheen
Last Updated: 2024/11/21, Brazilian wood, the most popular foliage plant in recent years, is deeply loved by flower friends because of its beautiful shape, shiny leaves and fragrance. However, although the efficacy of Brazilian wood is good, for farmers, it needs careful care, especially pruning, and must not be careless.

Brazil wood, in recent years the most popular foliage plants, it is beautiful shape, leaves rich luster, and can emit fragrance, loved by flower friends. However, although the effect of Brazilian wood is good, but for farmers, it needs careful care, especially pruning, must not be sloppy. How does that Brazilian wood trim to look good? The following is a small series together to see the Brazilian wood pruning method diagram.

1. How to trim Brazilian wood is very important.

As a beautiful foliage plant, Brazil wood is raised at home by many flower friends, but it is not easy to raise it at home. It is understood that if sufficient nutrients, Brazil wood can grow up to 6 meters high! Such a height is definitely not good indoors, so flower friends need to control the height of Brazilian wood through construction. As for how to trim Brazilian wood, this requires us to master the correct pruning method.

2. Illustration of pruning method of Brazilian wood

Tools: scissors, knives, markers, alcohol, etc.

(1)How to trim Brazilian trees too high?

Brazil wood plant type fitness, its trunk is upright growth, once the nutrients are sufficient, it can give the roof to wear, so in indoor cultivation, proper pruning control Brazil wood height is very important. Specific pruning methods are as follows:

① Mark: pruning Brazil wood, first determine which section you want to trim, and make a mark on it.

② Disinfection: Before pruning, in order to ensure the safety of plants, everyone should disinfect scissors and knives with alcohol.

③ pruning: Brazilian wood pruning, generally a branch needs to be removed from the entire root node. Cut from top to bottom, then from bottom to top, pay attention to keep the incision flat, preferably close to the trunk.

(2)Trimmed leaves of Brazilian wood

In the growth process of Brazil wood, with the trunk tall, the branches and leaves will also grow tall, resulting in the lower part of the trunk appears empty, so it is necessary to trim the tall branches and leaves in time. However, because of the many leaves of Brazilian wood, it is necessary to mark the leaves to be cut off with a marker before pruning, so as not to cut the wrong leaves because there are too many leaves.

(3)Maintenance of Brazilian wood after pruning

Brazil wood breeding method is simple, pruning maintenance is not difficult, only need less watering, and put it in a cool environment below can be. However, it should be noted that less fertilizer should be applied after pruning, because too much fertilizer will make the plant grow rapidly because of sufficient nutrients, so that it loses the effect of truncating Brazilian wood.

Brazil wood how to trim just good-looking, read the above content, we should have more confidence in raising Brazil wood! In general, Brazil wood vitality is strong, if you raise Brazil wood, try to trim it, do not be afraid to cut bad oh ~ about Brazil wood pruning method, Xiaobian introduced this, I hope to bring help to everyone.

How to breed Brazilian wood, Brazilian wood propagation method diagram/cutting survival rate 100%

As a kind of foliage plant introduced from abroad, Brazil wood can be said to be loved by flower friends in recent years. It not only looks good, but also purifies the air and beautifies the home. Therefore, it is propagated in large quantities. And different plant reproduction method is different, how does that Brazil wood breed? Here's a look at the illustration of Brazilian wood reproduction methods along with Xiaobian.

1. How to breed Brazilian wood, cutting/layering/sowing

As a common foliage plant, the cultivation method of Brazilian wood can be said to be very simple, as long as careful can make it amazing. However, it would not be easy to reproduce Brazilian trees by yourself. According to inquiries, there are three methods of propagation of Brazilian wood: cuttage, ramets and sowing, among which the most commonly used is cuttage, let's take a look at the specific operation.

2. Illustration of propagation method of Brazilian wood

(1)Cuttage Propagation of Brazilian Wood

To say propagation Brazil wood, the most commonly used or cuttage propagation. According to Xiaobian inquiry, the cuttage propagation of Brazilian wood can also be divided into two types: columnar cuttage and twig cuttage.

1. Columnar cuttings of Brazilian wood

① Cutting: Choose thick trunk with diameter of 6-10 cm as cutting. However, more than 10 cm trunk can also be selected, but to keep the trunk fresh, a few skin color to light yellow is appropriate;

② Substrate: According to the growth habits of Brazilian wood, cutting substrate can choose river sand, vermiculite or moss. Substrate depth about 30 cm, remember to disinfect it before cutting;

3 Cutting: Insert the cuttings into the substrate at a depth of about 10-25 cm. Of course, the depth is mainly related to the degree of firmness. If the cutting height reaches more than 1 meter, in order to fix the cutting firmly, other main formulas can be used for its fixation.

④ Maintenance: After cutting, water in time to keep the soil moist, while avoiding the sun around noon, about a month or so can see the new buds. When the buds grow to 5 cm to 10 cm high, they can be planted.

2. The twigs of Brazilian wood

Brazilian wood twigs cuttage, and pruning want to combine, in order to control the height of Brazilian wood, cut branches (Yanshen: Brazilian wood pruning method) can be used for cuttage. Cuttings can choose horizontal insertion and vertical insertion, keep the room temperature at 25-30℃, about a month or so can grow new roots. Note: In order to avoid pests and diseases of Brazilian wood, all kinds of soil container tools should also be disinfected before cutting.

(2)Other propagation methods of Brazilian wood

In addition to cuttage, Brazilian wood propagation method can also be used high branch layering method of propagation (complex operation, low survival rate). Moreover, Brazil wood will bear fruit after flowering, and then there will be seeds left behind, so Brazil wood can also be sown and propagated. However, it is generally difficult to get mature seeds of Brazilian wood, so sowing and breeding are not used much.

In general, the propagation of Brazilian wood, whether it is cuttings or sub-plants, sowing, can survive, but suitable for family reproduction is also cuttings. Of course, the method is dead, people are alive, we can choose the method to reproduce according to the actual situation. About the breeding method of Brazilian wood, Xiaobian introduced this, hoping to bring help to everyone.

Brazil iron tree Brazil iron tree breeding methods and precautions

?`?.??.?′′ˉ`? Related recommendations:

? Peacock flower

? Ash tree prices

? Barbata skullcap pictures and efficacy

? The whole picture appreciation.

? When does osmanthus bloom?

?`?.??.?′′ˉ`? Decorate your home and enjoy every minute of your life! This article comes from Love has a nest!

..........................................................................................

Brazil iron tree sounds like a very distant feeling, in fact, it is often in our health side, but we may not know its name or how to notice it at that time. But don't underestimate it, its role is very big oh. Let's take a look at the Brazilian iron tree explained by Xiaobian, the breeding method and precautions of Brazilian iron tree.

A Brief Introduction to Brazilian Iron Tree

Brazil iron tree, also known as fragrant dragon blood tree, Brazil wood, dragon blood tree, etc., for lily family dragon blood tree evergreen trees, generally used for potted plants, there are branches, leaves clustered on the top of the stem, curved leaves, bright green leaf color, shiny, small flowers but fragrance. Beautiful plant type, neat, is known as the world's most famous new generation of indoor foliage plants. Is now more popular indoor large potted plants, suitable for living room, study, office and other display, elegant shape, indoor decoration also played a very good role.

Growth Habits of Brazilian Iron Tree

Brazilian iron tree native to tropical regions, northern Africa. Like sufficient light, high temperature, humid climate environment, but also resistant to shade, dry, strong vitality, only need sunlight, air and very little water, with its own potential energy, in the bright northern room in the drier environment, can also grow well. China's Yunnan, Hainan and other areas are planted. Common varieties are: in the spot fragrant dragon blood tree, Phnom Penh fragrant dragon blood tree, yellow edge fragrant dragon blood tree and other plants.

The cultivation methods and precautions of Brazilian iron tree

Soil: Brazil iron tree is generally planted as a household potted plant, should not buy too large. The selected soil contains humus, strong permeability, fertile and loose sandy soil can be cultivated.

Watering: After planting the Brazilian iron tree, pour water, then put it in the shade for half a month, and then put it in a sunny and ventilated place for maintenance. Keep the pot soil moist, but not too wet, let alone accumulated water. If it is placed outdoors, it should be drained in time after rain.

Insect disease: Brazil iron tree in the growth potential is vulnerable to scale insects harm, scale insects will generally hide in the back of the leaves, in a non-ventilated environment more prone to coal pollution disease, so Brazil iron tree must be in a ventilated place, and to timely medication treatment.

Pruning: Brazil iron tree in the growth to maturity, can be cut off the following old leaves, keep 2 to 3 rounds of leaves, do not often prune. If the leaves are yellow and dry after being damaged by pests, the leaves should be cut off in time.

Summary: Brazil iron tree elegant appearance, tall and straight, full of tropical style, if the home decoration is a tropical atmosphere, put one or two pots of Brazil iron tree is suitable, with it decorate the living room, looks like the whole room dignified elegant, full of natural taste oh. So friends who like it must not miss it.

☆═━┈ ┈推荐阅读

? Wedding supplies wholesale market? Happy ten thousand years long cross stitch? What brand of massage pillow is good? How about a little soft health pillow? How to grow lotus seeds

? How to breed calla lily? How to breed longevity flower? How to breed Phoenix tail bamboo? How to breed Clivia? Sleep without pillows, okay?

? The planting technique of Dendrobium? Cross stitch shop join? Can pregnant women use electric blankets? 1.5 Rice bed quilt cover size? Is the cactus radiation-proof?

 
0