There are four reasons why ginger flowers do not bloom: investigation / soil / fertilization / temperature / humidity

Under normal circumstances, the flowering period of ginger flowers is from July to August, but when some flower friends are planting, they encounter the situation that it does not blossom, and even there are only long buds that do not blossom, which makes these flower friends very distressed, so why do not ginger flowers bloom? The editor believes that there are mainly the following reasons.

Why don't ginger flowers blossom?

1. Improper fertilization

When a plant lacks nutrition, there will be problems in its growth, such as yellowing leaves, slow plant growth, dull stems and leaves, difficulty in flowering, and so on. Improper fertilization is one of the main reasons for not blooming when planting ginger flowers. in addition, only the application of available nitrogen fertilizer will also cause this problem.

Solution: pay attention to balanced nutrition in fertilization, and apply corresponding fertilizers at different stages, such as basic fertilizer at the pot stage of seedlings, rotten organic fertilizer at the growth stage, phosphorus and potassium fertilizer before flowering, etc., neither often do not apply fertilizer, nor apply only one kind of fertilizer.

2. Temperature discomfort

Ginger flower is not a kind of plant with strong cold tolerance, when the temperature is lower than 10 degrees, its exposed parts on the ground will wither quickly, and if the temperature is below 15 degrees, its growth will be relatively slow, and it will be difficult to blossom even when it comes to flowering. So we should pay attention to the ambient temperature.

Solution: put the ginger flowers indoors with a room temperature higher than 10 degrees in winter, and adjust the location according to the ambient temperature in other seasons. Do not put it in places where it is windy or too cool, otherwise it will grow poorly because of temperature discomfort and blossom more slowly than other ginger flowers.

3. Air drying

Ginger flowers are produced in tropical rain forests, where the humidity is usually relatively high, so when we plant it, we need to ensure that the humidity is above 50%. If the air is too dry, then the growth of ginger flowers will be inhibited, once the flowering is missed, it will be more difficult to blossom when the temperature drops.

Solution: air drying is one of the reasons why ginger flowers do not blossom. To solve this problem, we need to start with watering and environmental ventilation. When the humidity is low, we can spray water on the plants and leaves to increase the humidity. In addition, the environment can be ventilated to avoid air dryness.

4. Soil problems

The soil determines the speed of the growth of the ginger flower. if there is a problem in the soil, then the growth of the ginger flower will naturally have a problem, and not blooming is just one of the results of the problem. The more common soil problems are: too barren, hardening and drying up, too high alkalinity, being attacked by bacteria, and so on.

Solution: the problem of barren can be solved by rational fertilization; hardening and drying requires reasonable watering to avoid long-term water shortage; too high alkalinity needs to start with soil selection and basin change. when germs invade, disinfect the soil before planting in the pot.

How to do ginger leaf curl? four tricks can prevent leaf curl / light is crucial.

The leaf of ginger flower is quite special, its shape is oblong lanceolate, the length is about 20-40 cm, it can be said to be very broad and beautiful, so that the overall plant shape appears to be more stretched, but some flower friends encountered the curling of ginger leaves when planting, what should be done at this time? The editor is here to tell you some tips.

What about the curling of ginger leaves?

1. Enhance the lighting

When the ginger flower is in a relatively dark environment, its leaves will grow steeply because of the lack of photosynthesis, and then it will slowly wilt, and then it is easy to curl the leaves, so when planting ginger flowers, you can't put it in a place where there is no light.

What to do: ginger flowers prefer sunny places. In spring, autumn and winter, they should try their best to get sunshine. If they encounter curly leaves, they should first move them to a semi-shady environment, and then slowly increase the light.

2. Long-term fattening

The growth of ginger flower needs a variety of nutritional reasons, such as nitrogen, phosphorus, potassium, iron and so on. When potted, the nutrients in the soil are limited. If little fertilizer is applied, it will lead to a lack of necessary nutrients in the soil, and one of the results will be leaf curl. It may even cause poor plant growth.

What to do: what to do about the curl of ginger leaves caused by lack of fertilizer? According to the law of ginger flower growth reasonable fertilization, fertilizer is best to use microbial fertilizer, but also can use mature organic fertilizer, when found that the leaf growth is abnormal, it is necessary to check whether there is a fertilization problem.

3. Reduce watering

Although the ginger flower is a freshwater herb, it is not resistant to water and wet. once it is overwatered or poorly drained in the rainy season, the flowerpot will have stagnant water, the roots will rot easily in the water, and the plant will have problems with absorbing nutrients. Its leaves will curl.

What to do: in the cultivation method of ginger flowers, we have stressed that watering should be dry and wet, which means that the soil should be watered when the soil surface is white and dry, and each watering requires seeing water from the bottom drainage hole to show that it is watered through. all watering should pay more attention to the dryness and wetness of the soil.

4. Alkali in soil and water.

When cultivating ginger flowers, the water and soil used should be slightly acidic, if the alkalinity is too high, it will cause plant discomfort, ginger flowers will yellow and curl their leaves due to lack of iron, so the soil can not use black soil and so on. Watering also try to avoid too high alkalinity.

What to do: need to change the soil of ginger flower as soon as possible, let it transplant from the soil with too high alkalinity to the slightly acidic soil, and then water it mainly with tap water, river water and so on. If the alkalinity of tap water is high, you can rest for a few days and filter it before use.

Can ginger flowers be raised in water? how to raise ginger flowers in water / aquaculture / hydroponic techniques

Ginger flower is loved by people for its elegant flower posture and pungent aroma, and many flower friends wonder how ginger flower can be so beautiful, so can it be raised in water? How to raise ginger flowers in water if you can? And how do ginger flowers blossom in water? With these questions, let's find the answers.

Can ginger flowers be raised in water?

First of all, ginger flowers can be raised in water, and like most hydroponic plants, ginger flowers can be cultivated in hydroponic containers with fixed baskets, but there are some skills that need to be mastered during maintenance, such as changing water, pruning, adding nutrient solution, and so on, otherwise it will easily lead to plant death.

How to raise ginger flowers in water

1. Take off the pot: dig out the ginger flowers from the flowerpot, pay attention to taking the soil mass out of the flowerpot. When taking off the pot, it can be light around the pot, so that there is loosening between the soil and the pot, so that it is not easy to hurt the stems and leaves.

2. Remove the soil: wash the soil of the root with clean water, and then soak it in potassium permanganate or carbendazim solution, which can play the role of disinfection and sterilization, so that it is not easy to breed too many microorganisms after water culture, and it is not easy to produce diseases and insect pests of ginger flowers.

3. Planting: put the plant into the planting basket, fix the root with vermiculite, and then put the planting basket into the mouth of the water-fed container and add water to the container. The height of the water level is appropriate to cover 2/3 of the root, to ensure that 1/3 of the root is exposed to water. Root rot can be avoided.

4. Maintenance: if you complete the above three steps, then the water culture of ginger flowers has been achieved, but if you want it to grow smoothly, you need to do a good job of maintenance and management in the later stage, including changing water, adding nutrient solution, pruning and so on. Change the water once every 10 days when the water is raised, and change the water every 3-5 days after resuming growth. The nutrient solution can be added every 2 times. If the root is rotten, it needs to be pruned in time.

How do ginger flowers blossom in water

1. Adequate light: when raised in water, ginger flowers cannot be placed in dark places, especially in rooms that lack light and are relatively closed. If there is not enough light, they will not only grow slowly but not blossom, but also make the plants wither quickly.

2, temperature control: ginger flowers need a temperature of 25-30 degrees, if the temperature is low, it is difficult to blossom, so when raising water, we must ensure that the temperature is moderate, keep warm in winter, when changing water, the water temperature should be close to room temperature, do not use too cold water, otherwise the roots will be frostbitten.