MySheen

How to reproduce potted honeysuckle, diagram of cutting propagation method of honeysuckle / 100% survival

Published: 2024-11-22 Author: mysheen
Last Updated: 2024/11/22, Speaking of honeysuckle, I believe we are no stranger, honeysuckle's unique fragrance is loved by people. In nature, any plant has a method of reproduction, and honeysuckle is no exception. How do honeysuckle reproduce? There are many propagation methods of honeysuckle, the most common of which are cutting, sowing, striping propagation and so on.

Speaking of honeysuckle, I believe we are no stranger, honeysuckle's unique fragrance is loved by people. In nature, any plant has a method of reproduction, and honeysuckle is no exception. How do honeysuckle reproduce? There are many propagation methods of honeysuckle, the most common one is cutting, sowing, pressing propagation and so on. The simplest and practical one is the cutting method. Let's take a look at the diagram of the cutting propagation method of honeysuckle with the editor.

First, how to propagate potted honeysuckle and sow seeds by cutting

Honeysuckle is often seen on country roads, and many people plant honeysuckle at home. If you want to change honeysuckle into more than one pot, you must learn how to reproduce honeysuckle. The most common survival rate is the highest sowing and cutting methods, let's talk about these two methods in detail, first take a look at the Honeysuckle cutting propagation method diagram.

II. Illustration of cutting propagation methods of Flos Lonicerae

1. Select branches

Cutting propagation of honeysuckle branches must choose more robust, so that it is easier to survive. You can choose the sturdy branches of the year, preferably straight, and this kind of good cuttage is also good for growth. Cut cuttings of 15cm to 30cm, in order to improve the survival rate of cuttings, it is recommended to pick a few more branches, not too tender branches.

2. Remove the leaves at the bottom of the branch

Remove the bottom leaves and prepare the flowerpot (or the pot that has been planted). The pot soil is random, as long as it is not all nutritious soil. now many flower friends directly use the nutritious soil bought to grow vegetables. In fact, you should add some ordinary soil or sand.

3. Cuttage

Insert the cut branch obliquely into the soil, the depth of the branch is 1 beat 2, and press the fruit slightly. Pour water after insertion, keep the soil moist later, put it in a ventilated place without direct sunlight, it can take root after about half a month; after rooting, put it outside in time for normal management, and transplant it according to the situation.

4. Cutting time

In order to reduce the risk of failure, you can cut a few more branches. Cutting propagation can be carried out all the year round, but it is best in spring or autumn. Especially in spring, it is very easy to survive.

5. Fertilization

When new leaves are grown, fertilizer can be applied. If the flowerpot is too small, you can change to a large one. I believe that after less than two years of planting, the soil is fertile enough, and if the basin is big enough, it is not difficult to climb the whole railing. But also can produce fragrant and beautiful flowers.

6. Points for attention

If the cuttings are cut in spring, new buds will soon sprout among the leaves, but they will not take root, so the management can not be relaxed at this time. Some friends like to often pull out the cutting branches to watch, if they find that there is a nodule in the lower part of the cutting branches (similar to the appearance of rhizobium, although there is no root, but such branches have survived.) Through the above illustration of honeysuckle cutting propagation methods, I believe we already know how honeysuckle propagates. Let's take a look at the sowing and breeding methods.

3. Methods of sowing and propagation

Before and after Frosts Descent, when the honeysuckle berries turn black, collect the ripe fruit in time, rub it in clean water, bleach the peel and impurities, remove the full seeds sunk to the bottom, dry and store them, and sow them as they are picked.

If sowing in spring the following year, take out the seeds 40 days before sowing, soak them in 40 ℃ warm water for 24 hours, remove and 3 times the wet sand layer to accelerate germination, when 50% of the seeds are white, the seeds can be screened for strip sowing. The above is the diagram of the cutting propagation method of honeysuckle and the whole content of how to reproduce honeysuckle, hoping to help you.

How does purple bamboo plum reproduce? the reproduction method diagram / cutting survival rate of purple bamboo plum is 100%.

Purple bamboo plum, named because the whole plant is purple and shaped like plum blossom, is a kind of ornamental and medicinal plant, which is deeply loved by flower friends. But does a pot of purple bamboo plum feel monotonous? It's time to breed a few more pots, so how does purple bamboo plum reproduce? Here are three propagation methods of purple bamboo plum, of which the survival rate of cuttings is the highest, which will be described in detail by the editor today.

1. How to propagate purple bamboo plum, cuttage / ramet / sowing

As a common indoor potted plant, the breeding method of purple bamboo plum is not difficult, you only need to pay some attention to it. But if you want to master the breeding method of purple bamboo plum, you have to pay more attention to it. As for how to reproduce purple bamboo plum, there are three main methods: cutting, ramet and sowing.

Ps: although there are many propagation methods of purple bamboo plum, it is troublesome to dig up the whole purple bamboo plum plant; after the purple bamboo plum blossoms, the seeds are more difficult to get, and sowing and reproduction is not suitable for indoor operation, so the most suitable operation is cutting, and then the editor will focus on the purple bamboo plum cutting method.

2. Diagram of cutting method of purple bamboo and plum.

1. Cutting time

It is understood that the optimum temperature for rooting of purple bamboo plum cuttings is 18-25 ℃, so the best time for purple bamboo plum cutting is spring and autumn.

2. Cuttings selection

Purple bamboo plum cutting, naturally without cuttings, that is, cutting purple bamboo plum branches. On the potted plant of purple bamboo and plum, the healthy and pest-free branches were cut into 5-8 cm long segments, each with more than three leaf nodes. These branches are cuttings.

3. Cutting substrate

The cutting substrate for purple bamboo plum can be made of river sand, peat soil and other materials. In addition, use medium and coarse river sand, but rinse with clean water several times before use. However, before use, we had better disinfect it first, which can improve the survival rate of purple bamboo plum cuttage.

4. Cuttings start

With the above preparation, the purple bamboo plum cuttage can be officially started: wet the cutting substrate a little bit, and then insert the dried cuttings into it, the depth of the cuttings can be as deep as 1max 2-2max 3.

5. Cutting management

One of the most important things after cutting is to maintain relative humidity, so it is best to spray water 1-3 times a day to keep the cuttings moisturized. if the temperature is relatively high in sunny days, spray twice more. In addition, the sun must be shaded by 50% and 80% after cutting. Generally speaking, it is not difficult to cut purple bamboo plum, and the survival rate can reach 100% if you are more careful.

Generally speaking, the propagation of purple bamboo and plum is not difficult, cutting, ramet and sowing can all take root and survive, but in terms of survival rate, cutting is the best. Of course, the method is dead, people are alive, we can according to the actual situation, choose the method to breed. With regard to the breeding method of purple bamboo plum, the editor has introduced this, hoping to give you some help.

How to propagate bamboo and cypress, the method of cutting propagation / the survival rate of cuttings in early spring is 100%.

Raise plants indoors, many people will choose bamboo and cypress, it is evergreen all the year round, no matter where it is placed, it has excellent ornamental. But is a pot of bamboo and cypress too monotonous? More pots of bamboo and cypress together will be more beautiful! If you don't want to buy it, you need to breed it yourself. how can bamboo and cypress breed? Let's take a look at the cuttage propagation methods of bamboo and cypress with Xiaobian.

First, how to propagate and cut bamboo and cypress.

When it comes to the propagation methods of bamboo and cypress, cuttings and strips are fine, but they are most suitable for indoor operations, and cuttings are the ones with a higher survival rate. The operation is also simple, cut a bamboo and cypress branch as cuttings, insert it into the culture soil, provide a good environment for careful maintenance, and wait for it to take root and transplant it in a pot.

2. Cutting propagation methods of bamboo and cypress.

1. Cutting time

If you want to cut bamboo and cypress, you must first choose a good time. Generally speaking, bamboo and cypress can be cut all the year round, but if you want the survival rate to be as high as 100%, you'd better choose the first and middle of March, followed by mid-September.

2. Cuttings selection

In the cuttage propagation method of bamboo and cypress, the selection of cuttings is undoubtedly the most important step, it has been selected, and the whole propagation is basically half completed. On the potted plant of bamboo and cypress, the branches that were born in the same year, grew sturdy and were free from diseases and insect pests were selected as cuttings.

3. Cuttings treatment

Cut the selected branches into segments of about 5-15 cm, each with more than 3 leaf nodes. As for the leaves, keep one. After the cuttings were treated, they were soaked in potassium permanganate solution for about 3 minutes, and then the base was soaked in LBA solution for 4-5 hours to wait for cutting.

4. Cuttings start

Before preparing for cuttage, it is best to choose bamboo sticks to make holes about 3-5 cm deep on the substrate, then insert the cuttings into the holes, and finally compact the base with your hands.

Note: the leaves on each cuttage can finally be compacted by hand to avoid covering the leaves of the adjacent cuttings.

5. Maintenance after insertion

After the cuttage of bamboo and cypress is completed, it should be watered in time so that the cuttings can be in close contact with the substrate. After doing a good job of shading, it is best to keep the shading at about 50%, 80%, and then gradually remove the shading net after the bamboo and cypress take root. Wait for bamboo and cypress seedlings to grow to 25-30 cm or so, you can change pots and transplant, and then according to the breeding methods of bamboo and cypress to maintain it.

After reading the full text, I believe that many flower friends can breed bamboo and cypress. Generally speaking, the vitality of bamboo and cypress is tenacious, and the survival rate of cuttings is also high, so even beginners are easy to operate successfully. If there is a pot of bamboo and cypress around you, try cutting. the joy after success is a rare experience.

 
0