How to propagate the plum blossom, the propagation method / cutting propagation has a high survival rate.

Plum blossom is a kind of plant with high ornamental value, and it is also a necessary plant in the home of many aquaculture lovers, so its reproduction method is also a matter of concern to many people. About how to reproduce the plum blossom and what are the breeding methods of the plum blossom? Next, the editor will take you to learn about it.

How to reproduce the plum blossom

On the question of how to reproduce the plum blossom, we can generally choose to carry out cutting propagation, and the survival rate of this propagation method is also relatively high. In the following, there is a detailed explanation of the propagation method of the plum blossom. Interested friends can learn about it.

2. Propagation methods of Prunus mume

Cuttage propagation

1. Cutting time

When cutting plum blossom, it is generally best to choose this event point from April to June, because the temperature at this time is the most suitable for the growth of plum blossom, and the survival rate of cutting propagation at this time will be greatly improved.

two。 Soil selection

When cutting the plum blossom, we must first choose the soil, we can choose the soil with good drainage, which is more conducive to its absorption of nutrients, which we can refer to the culture method of the plum blossom, which is not introduced too much in this editor.

3. Cuttings selection

The selection of cuttings is also an important step in the propagation of plum blossoms. We had better choose branches with strong growth and no diseases and insect pests, so that the success of cutting will be greatly increased.

4. Cutting methods of Prunus mume

In cutting, it is best to keep the ambient temperature at about 15-28 °C, so the success rate is higher, it is best not to carry out in the case of too high temperature. When cutting, we should first wet the soil, because cutting when the soil is too dry is easy to cause damage to the cuttings.

5. Subsequent management

After the cuttage is finished, we should control it and maintain it in a well-ventilated environment, usually watering once every 3-4 days. If the summer temperature is relatively high and the water evaporates quickly, we can also choose to water once a day.

On the question of how to reproduce the plum blossom, it is generally carried out by cutting, as long as we remember the above method of cutting, the success rate is still very high. This is the end of the introduction to the breeding method of plum blossoms. If you have time, you can try it yourself.

How to reproduce Prunus mume blossom? the propagation method / grafting of Prunus mume flower is the easiest to survive.

It is well known that the efficacy and function of the plum blossom is very many, so more and more people grow it, and when the plum blossom blossoms, it often involves the problem of reproduction, as a different plant, how to reproduce better? Today we will take a look at the breeding methods of plum blossoms.

How to reproduce Prunus mume

The propagation methods of plum blossom include grafting, planting, sowing, cutting and striping, of which the most commonly used is grafting, which is more convenient to operate, and other ways are also more commonly used, it can be said that each has its own characteristics, let's take a look at the specific methods.

First, how to graft the wax plum blossom

1. Grafting time

The time is generally chosen from March to April, that is, after the flower fade, when the bud germinates with wheat grain size, the grafting is the easiest to survive and is more conducive to flower branch germination. If the bud is too large, the success rate of grafting will be lower.

2. Methods

One month before grafting, the sturdy and longer annual branches were selected from the strong mother tree, and then the top tip was cut off to concentrate nutrients to the middle part of the branch, which could provide sufficient nutrients for grafting.

Cut the leaf bud into a scion of about 6 cm, and then prepare 5-year-old Chimonanthus seedlings as rootstock, the cut of the rootstock should be slightly longer, join the scion with the rootstock, and then smear it with mud.

Seal the treated grafted plants with soil, and after a month, you can pick up the soil and cultivate the surviving ones. The grafted seedlings should be heart-picked in time after cultivation, which can promote the proliferation and germination of the seedlings.

Note: if you use the grafting in the breeding method of Lamei blossom, you should first cut off the scion under the interface after survival, and then cut off the branches and tips of the rootstock above the cut.

2. Sowing and propagation

1. Sowing time

The time of harvest is from June to July of that year. After picking the fruit, peel out the seeds, then store them in wet sand and store them for reproduction in March of the second year.

2. Specific methods

When using sowing method, how to reproduce the plum blossom? First take out the stored seeds, then clear them in the water together with the sand, wash the wax off, and then spread them evenly on the sand bed. Attention should be paid to fertilization and weeding at the seedling stage, and it can be transplanted after 2 years of cultivation.

3. Ramet propagation

1. Ramet time

Ramet is usually carried out in February-March, if the florescence is delayed, it is necessary to wait for the flower to fade before ramet.

2. Specific methods

When the leaf bud just sends out, can carry on the ramet propagation, how does the wax plum blossom reproduce at this time? First dig out the sturdy mother plant and split the stem with a knife so that each one retains at least three or more stems.

The divided stalks are planted in a fertile basin of prepared soil, then a small amount of water is watered, and when the plants begin to grow normally, they are managed in accordance with the culture method of plum blossoms.

IV. Cutting propagation

The cuttage propagation of Prunus mume is usually carried out in November, rather than other plants in spring, the cold tolerance of Prunus mume is strong, so the cutting in November is still easy to survive. Generally, the summer twig is the best, and the branches with strong growth are selected as cuttings. After soaking 1min with 1 × 10-4 α-naphthylacetic acid, it is easier to root in the shaded plastic shed.

How does purple bamboo plum reproduce? the reproduction method diagram / cutting survival rate of purple bamboo plum is 100%.

Purple bamboo plum, named because the whole plant is purple and shaped like plum blossom, is a kind of ornamental and medicinal plant, which is deeply loved by flower friends. But does a pot of purple bamboo plum feel monotonous? It's time to breed a few more pots, so how does purple bamboo plum reproduce? Here are three propagation methods of purple bamboo plum, of which the survival rate of cuttings is the highest, which will be described in detail by the editor today.

1. How to propagate purple bamboo plum, cuttage / ramet / sowing

As a common indoor potted plant, the breeding method of purple bamboo plum is not difficult, you only need to pay some attention to it. But if you want to master the breeding method of purple bamboo plum, you have to pay more attention to it. As for how to reproduce purple bamboo plum, there are three main methods: cutting, ramet and sowing.

Ps: although there are many propagation methods of purple bamboo plum, it is troublesome to dig up the whole purple bamboo plum plant; after the purple bamboo plum blossoms, the seeds are more difficult to get, and sowing and reproduction is not suitable for indoor operation, so the most suitable operation is cutting, and then the editor will focus on the purple bamboo plum cutting method.

2. Diagram of cutting method of purple bamboo and plum.

1. Cutting time

It is understood that the optimum temperature for rooting of purple bamboo plum cuttings is 18-25 ℃, so the best time for purple bamboo plum cutting is spring and autumn.

2. Cuttings selection

Purple bamboo plum cutting, naturally without cuttings, that is, cutting purple bamboo plum branches. On the potted plant of purple bamboo and plum, the healthy and pest-free branches were cut into 5-8 cm long segments, each with more than three leaf nodes. These branches are cuttings.

3. Cutting substrate

The cutting substrate for purple bamboo plum can be made of river sand, peat soil and other materials. In addition, use medium and coarse river sand, but rinse with clean water several times before use. However, before use, we had better disinfect it first, which can improve the survival rate of purple bamboo plum cuttage.

4. Cuttings start

With the above preparation, the purple bamboo plum cuttage can be officially started: wet the cutting substrate a little bit, and then insert the dried cuttings into it, the depth of the cuttings can be as deep as 1max 2-2max 3.

5. Cutting management

One of the most important things after cutting is to maintain relative humidity, so it is best to spray water 1-3 times a day to keep the cuttings moisturized. if the temperature is relatively high in sunny days, spray twice more. In addition, the sun must be shaded by 50% and 80% after cutting. Generally speaking, it is not difficult to cut purple bamboo plum, and the survival rate can reach 100% if you are more careful.

Generally speaking, the propagation of purple bamboo and plum is not difficult, cutting, ramet and sowing can all take root and survive, but in terms of survival rate, cutting is the best. Of course, the method is dead, people are alive, we can according to the actual situation, choose the method to breed. With regard to the breeding method of purple bamboo plum, the editor has introduced this, hoping to give you some help.