How does the happiness tree reproduce? the propagation method / cuttage survival rate of the happiness tree is as high as 100%.

As a common indoor potted plant, the happiness tree not only grows good-looking, but also places people's pursuit of happiness. In life, many flower friends who like the happiness tree will keep it at home. If they don't go to the florist to buy it, it is definitely not as good as to breed it by themselves. How does the happiness tree breed? Here are three breeding methods of Happiness Tree, of which cutting is the most convenient. Follow the editor to have a look.

First, how to propagate the happiness tree, cutting / sowing / pressing

With regard to the breeding method of the happiness tree, I believe we all know, but how many people know the breeding method of the happiness tree? It is understood that happiness trees will blossom and bear fruit, so they can sow and reproduce. In addition, the happiness tree can also be propagated by cutting and pressing, in which cutting is the most convenient and the survival rate is the highest. Let's move on to the specific operation.

2. three breeding methods of Happiness Tree

(1) Cuttage propagation of happiness tree.

1. Cutting time

How the happiness tree propagates, choosing a reasonable time is very important. Considering the growth temperature of the root of the happiness tree, the editor recommends that when you propagate the happiness tree by cutting, it is best to choose between March and April, when the external temperature is about 15 ℃, and the survival rate of cutting propagation is high.

2. Cuttings selection

Pick a good time, the next is to choose the cuttings, its quality will directly determine the survival rate of the whole reproduction. In March, we can choose 1-2-year-old woody branches, cut off 15-20 cm in length as cuttings. Then all the leaves on the cuttings are cut off, and the distance between the cut and the stem node is about 0.5 cm.

3. Cuttage starts

After the cuttings are selected, they are directly inserted into the sandy soil (with good air permeability), and the best insertion depth is 1 stick 3 or 1 bank 2 of the branches, because if the cuttings are too shallow, it is difficult to fix the cuttings, and the result is that it is difficult to take root after cutting.

4. Maintenance after insertion

The cuttage propagation of the happiness tree is basically over as the above step, and the rest is maintenance. After cutting, water properly to keep the soil moist. After 20 days, it has basically taken root. After that, the branches are dug up with soil balls, planted in pots, and then maintained normally. If you do the above steps, the survival rate of cutting propagation can reach 100%!

Rooting judgment: 20 days later, everyone gently pull the branches of the happiness tree with their hands to check the growth of the root system. If it is hard and difficult to pull up, it means it has already taken root, and vice versa.

(2) striping propagation of Happiness Tree

In addition to cuttings, the propagation method of the happiness tree also has striping, which is a very labor-saving method. However, there are many disadvantages of striping, because once the operation is improper, it will not be able to reproduce new plants, and it will be very difficult for the branches to grow. The specific operations are as follows:

1. Crimping time

Choose striping to propagate the happiness tree, and it is best to choose spring, which is the growing season of the happiness tree. Striping can improve the survival rate. Not only that, there is another advantage of striping, that is, if the crimping is not successful, the branches can be cut short in time and the branches can grow again.

2. Crimping method

On a sunny day in spring, choose the branch of the two-year-old happiness tree and peel it at the lower end of the branch with a width of 2-3 times the diameter. Then, wrap it with soil at the ring peel, and knead it into a lump of soil, and then wrap it with plastic film, exposing a small opening at the upper end to facilitate water supply. After autumn, a relatively complete root system will grow at the ring peeling place, which can be removed and planted in a pot.

(3) sowing and propagation of happiness tree

The flowering period of the happiness tree is from May to September, and after it blossoms, it will bear fruit, after which there will be seeds, and if there are seeds, it can be sown and propagated. So one of the ways to reproduce the happiness tree is to sow seeds. The specific operations are as follows:

1. Seed selection and budding

The happiness tree blossoms from May to September, and the seeds are usually ripe in December, when the seeds are taken and preserved. Then in March of the following year, take out the seeds, soak them in water for 3-4 hours, remove them and dry them. The skin of happiness tree seeds is not very hard, do not soak for too long, so as not to soak the seeds to rot.

2. Sowing method

After completing the above steps, the treated seeds are evenly planted in the basin soil, each at a certain distance, covered with a thin layer of soil. Then cover the flowerpot with a protective film to ensure enough humidity for the seeds to germinate. After the seeds germinate, take off the film and shade it properly. When there are 4-5 leaves in the account book, you can plant them in the pot.

Generally speaking, it is not difficult to breed happiness trees, and all three breeding methods are easy to survive, but cutting is the best in terms of survival rate. Of course, the method is dead, people are alive, we can according to the actual situation, choose the method to breed. With regard to the breeding method of the happiness tree, the editor has introduced this, hoping to give you some help.

The method of Cuttage Propagation of Ping an Tree how to cultivate potted Ping an Tree

The best season for Ping an tree cutting is summer, and of course spring is OK, but the survival rate is higher in summer (the best time for Ping an tree cutting is 22 ℃ to 28 ℃). If there are conditions, it is best to dip in some rooting powder, because this will also increase the survival rate.

The method of cutting Propagation of Ping an Tree

The branch selection of Ping an tree: choose the semi-lignified branches which are relatively strong in the same year, at this time the branches are in the period of transformation to mature branches, the meristematic ability of cells is strong, it is easy to produce healing tissue, and the survival rate is high.

Cutting medium: perlite and vermiculite can be mixed at 1:1, then disinfected with carbendazim solution, and can be used the next day.

The specific operation methods of Ping an tree cutting are as follows:

1. Cut the branches of Ping an tree into 10 cm to 15 cm long and leave 2 to 3 leaves to reduce water loss. Leave 3 cm to 5 cm at the lower end of the cuttings and cut them into an oblique mouth and wait for the cuttings in a wet place.

two。 Insert the safe branch into the soil 2can3 (the step of dipping rooting agent or powder can be done conditionally, and skip if there is no condition), then compaction, put it in a shaded place, wrap the whole cuttings in a plastic bag, maintain 100% humidity, keep it in a cool place, avoid direct sunlight, during rooting, the soil is not too wet, when the substrate humidity is high, do not water, but should keep the substrate moist, the environment relative humidity is about 80%. Less watering, cutting seedlings died of drought, watering too much, will cause wound tissue mildew.

Remove the plastic bag in about 20 days. After taking off the plastic, the weak sunlight time can be increased sooner or later, and it will begin to take root 25 days later, and a new root of 1 cm to 2 cm length can be grown in about a month. Roots can grow from 5 cm to 6 cm in 2 months. The old leaves do not fall off and new roots are produced, indicating that the cuttings survive.

How to cultivate potted plants of Ping an trees

Ping an tree is a kind of foliage plant, whose flower language is to pray for peace, family happiness and all the best. It is widely loved by the public because of its name "Ping an", and its body is rich in cinnamon oil, which can emit the fragrance of correcting peculiar smell and purifying air, so it is very suitable for indoor breeding.

With moderate light, the safe tree not only likes the sun but also is very shady, but it can not be exposed to the sun, especially when it is placed in the sun in summer, it is appropriate to cover about 50% of its area, otherwise the sun may burn the leaves. It can be exposed to the sun directly in winter without the need for shelter.

At the right temperature, Ping an tree likes to be warm and hot, and is not resistant to cold, so it is most suitable to grow at a temperature of 20 to 30 degrees. It is best to move into the house in winter so that the growth environment is not less than 5 degrees. Summer high temperature above 30 degrees should also do some protection, can spray water on its leaves to lower the temperature.

Watering correctly, Ping an tree likes a humid environment and is not resistant to drought, its basin soil should be kept relatively moist, leaves should be sprayed with water in dry weather, leaves should be sprayed once a day in summer, and indoor relative air humidity should be kept above 60%. When watering, you can first water once, and then water again in half an hour, so as to avoid the appearance of half of the water. The number of times of watering varies according to the season, and it can be watered when the topsoil is a little dry.

Soil and flowerpot, Ping an tree is suitable to grow in loose and breathable, rich acid rotten leaf soil or culture soil, need to loosen the soil every other month, and change the pot soil every two years. The bottom of the flowerpot should be breathable, and it should not be too small, because Ping an tree grows faster, and too small will hinder its growth.

Fertilization and pest control, fertilization every other month except winter, winter fertilization may hurt the rhizome. The safe tree will produce anthracnose, which will make the leaf surface, leaf tip and leaf edge brown. When it is found, in addition to removing the diseased leaves in time, it is also necessary to apply more phosphorus and potassium fertilizer to improve the plant's ability to resist diseases and insect pests. In addition, aphids and leaf curlers will also endanger the growth of safe trees, so they should be killed in time when they are found.

After reading the above introduction on the cutting propagation methods of potted Ping an trees, do you know more about the cutting propagation of Ping an trees? if you want to know more about Ping an trees, please continue to pay attention.

The introduction of several common breeding methods of the happiness tree, as well as the maintenance of the happiness tree after breeding, upon hearing this name, do flower friends feel very happy? Although the plant of Happiness Tree is not particularly tall, it has luxuriant branches and leaves and is a good foliage plant. The leaves of the happiness tree sway with the wind and make a rustling sound. Today, I will take you to learn about the breeding method of Happiness Tree.

I. Cuttage propagation

1. Cutting time

Considering the growth temperature of the root of Happiness Tree, the general cutting time is between March and April, and the temperature is about 15 ℃. The root can grow faster and have a high survival rate.

2. Selection of branches

Choose 1-2-year-old woody branches, about 15-20 cm in length, cut off all the leaves, and the distance between the cut and the stem node is about 0.5 cm.

The cut branches are cut directly into the sandy soil, and the depth is 1 stick 3 or 1 stick 2 of the branches. It is too shallow, the branches are not fixed, and it is difficult to take root.

3. Maintenance after cutting

Keep the soil moist after cutting. After 20 days, gently pull the branches with your hands to check the growth of the root system. If it is hard, it is difficult to pull it up, which means it has taken root. Dig out the branches with soil balls and plant them in the pot. After that, according to the maintenance method of the happiness tree, you can maintain it normally!

2. Sowing and propagation

1. Select seeds

The seeds of the happiness tree generally mature in December every year, it is recommended not to buy seeds at this time, beginners do not know how to save, it is difficult to plant a happiness tree.

2. Soaking seeds to accelerate germination

In early March, choose and buy full, dry seeds. Soak the seeds in water for 3 to 4 hours, remove them and dry them. The skin of happiness tree seeds is not very hard, do not soak for too long, so as not to soak the seeds to rot.

3. Sowing seeds

The treated seeds will be evenly planted in the soil, each at a certain distance, covered with a thin layer of soil. Then cover the flowerpot with a protective film to ensure enough humidity for the seeds to germinate.

After the seeds germinate, take off the film and shade it properly. When there are 4 or 5 leaves in the account book, you can plant them in the pot.

3. Striping propagation

Striping propagation is the most labor-saving method, but the disadvantage is that improper striping can not produce new plants and it is difficult for the branches to grow.

1. Crimping time

Spring is the growing season of the happiness tree every year, and pressing at this time can improve the survival rate. In addition, if the striping is not successful, cut the branch in time, and the branch can grow again.

2. Crimping method

Select the two-year-old branch and peel it at the lower end of the branch, the width of which is 2 to 3 times of the diameter.

Then the ring is wrapped in soil and squeezed into a lump of soil with a diameter of 8cm to 10cm. Then wrap the clod with plastic film and expose a small opening at the upper end to facilitate water supply. Then tie the girdled branches to the stout branches so as not to break the branches and affect their growth.

After three seasons, a relatively complete root system will grow in the autumn, which can be removed and planted in a pot.

The above are several common breeding methods of the happiness tree that I have sorted out. I hope it can be helpful to the majority of flower friends. Please continue to pay attention to the succulent flower bed and learn more about flower conservation.