How to sow and propagate crabapple in four seasons, sowing in spring and autumn is the best / container disinfection / seed quickening.

Among the propagation methods of four seasons crabapple, sowing and reproduction is a more commonly used method. This method has been tested countless times, so the survival rate is still relatively high. Of course, the premise is that you have to master the correct sowing method. So how to sow and reproduce four seasons begonia? Next, the editor will take you to learn about it.

How to sow and propagate crabapple in four seasons

1. Sowing time

When sowing crabapple in four seasons, it is very important to choose a correct time. Generally speaking, it is best to choose to sow in spring or autumn, because the climate of these two seasons is more suitable, which is very suitable for the growth of begonia. If you sow seeds in these two seasons, the survival rate will be greatly improved.

two。 Soil selection

The selection of soil is also an important part of the sowing process of four seasons begonia. Choosing the correct soil is of great help to the germination of seeds. Generally speaking, it is best to choose sandy soil with high looseness. This kind of soil has relatively good air permeability and drainage, which can make seeds better absorb nutrients to promote germination.

3. Container disinfection

The flowerpots selected by the four seasons crabapple must be cleaned and sterilized before sowing, so as not to spread bacteria to the four seasons crabapple. In addition, we have to lay the drainage holes at the bottom of the basin with tiles, which can also ensure the smooth drainage of the basin soil when watering.

4. Seed germination

In addition to the above three points, before sowing, we also need to accelerate the germination of the seeds of Begonia. During the germination, we can soak the seeds of Begonia with warm water for about 12-24 hours. Wait until the seeds begin to absorb water and expand, and then take them out and sow them, so that the seeds of Begonia can germinate faster.

5. Sowing method

About how to sow the four seasons crabapple, in fact, the method is very simple. First of all, we can mix the seeds with fine sand, then sow them evenly on the soil surface, and then cover the soil with 1-2cm or so after sowing, and then water them thoroughly, but do not have stagnant water. After watering, the seeds can germinate in about a week.

How to propagate, the method of propagation / sowing propagation / cutting propagation of Begonia angustifolia

Antler Begonia is a succulent plant of the family Prunaceae, which comes from South Africa. Nowadays, it is cultivated all over China. As more and more people breed it all over the country, the question about its reproduction has also aroused people's concern. How does the antler begonia reproduce? What are the breeding methods of antler Begonia? Next, the editor will take you to learn about it.

1. How to reproduce, sow / cut Begonia angustifolia

When it comes to how to reproduce staghorn begonia, it is mainly divided into two methods: sowing reproduction and cutting propagation, in which sowing reproduction is more suitable for indoor potted plants, generally carried out in spring, while cutting propagation is generally used in mass planting, which can be carried out in both spring and autumn. As long as we operate properly, both methods have a higher survival rate, details below, let's take a look.

Second, the propagation method of Malus angustifolia.

First of all, whether it is sowing propagation or cutting propagation, we need to choose soil first, which is a good foundation, which is very important. Generally, it is best to choose loose and fertile sandy loam, which has good drainage and strong air permeability, which can make plants better absorb nutrients and is not prone to the phenomenon of stagnant water in basin soil.

Sowing and reproduction

Seed prompting: before we sow and reproduce the staghorn crabapple, we first need to urge its seeds. We can soak its seeds in warm water for about a day, and take them out when the seeds begin to absorb water and swell. This allows the seeds to germinate more quickly.

Sowing method: in the breeding method of staghorn begonia, sowing and reproduction is a commonly used method. First of all, we need to apply appropriate amount of base fertilizer in the basin soil, and then sow the seeds evenly on the soil surface. After sowing, we can cover the soil with 1-2cm for watering, pay attention to watering thoroughly when watering, and then germinate in about 10 days.

Cuttage propagation

Cuttage selection: before we cuttage, we need to choose cuttings first, generally, it is best to choose branches with stronger growth, so that the survival rate will be higher, if we choose branches that look very slender, then it is basically difficult to survive. After selecting the cuttings, we have to prune the leaves at the bottom and keep the upper 2-3 leaves.

Cutting method: in the propagation method of staghorn begonia, cutting propagation is a relatively simple method. First of all, we can use chopsticks to cut out a hole in the thickness of cuttings in the soil, and then pour water into the cuttings. This operation can avoid damage to the cuttings during insertion, which is very practical. We can take root in 15-20 days after the cuttings are finished.

How to propagate begonia, the propagation method / sowing / cutting of begonia

Begonia is a common plant in Asia, and there are many people who cultivate begonia in our country. As more people breed, people are more concerned about its reproduction, so how do begonias reproduce? What are the breeding methods of begonia? Next, the editor will take you to learn about it.

How to propagate, sow / cuttage begonia

When it comes to how to reproduce begonia, in fact, it is mainly divided into two methods: sowing reproduction and cutting propagation. As long as they are operated properly, the survival rate of these two propagation methods is relatively high, so how do these two methods need to be operated? It's described in more detail below, and we'll move on.

2.Propagation methods of begonia

Sowing and reproduction

1. Seed harvesting

The fruit of begonia usually ripens around August every year. When it is ripe, we can harvest it. After harvest, we can wash the seeds and dry them. Then we can store them and sow them next spring.

two。 Seed initiation

Before we sow begonia, we also need to urge the seed. We can soak the seed in warm water for about 12-24 hours, and when it begins to absorb water and expand, we can take it out and sow it, which can improve the germination rate of the seed.

3. Sowing method

When sowing, we can sow the seeds evenly on the soil surface, after sowing, we do not need to cover the soil, use a board to gently press it, then soak it from the basin, wet it and take it out, at the same time, we should cover the mouth of the basin with translucent glass to maintain a high humidity in the basin, and put it in the semi-shade of 18-22 ℃ at room temperature for spray in the morning and evening. Generally, it can sprout about 7-30 days after sowing.

Cuttage propagation

The propagation method of begonia is mainly based on cutting propagation, this method of propagation has been tested for numerous times, and the survival rate is still quite high. Begonia cutting propagation is mainly divided into stem cutting, leaf cutting and rhizome cutting three methods, the specific operation methods in the following, let's take a look at it.

1. Stem cuttings

Stem cuttings are generally carried out in April-May with the best results, first of all, to select the top of the robust stem to do cuttings, 10-15cm long, with 2-3 buds, soil with loose, drainage number of fine river sand, perlite or bran ash, cuttings should not be buried too deep, generally insert 1/2 on it, after the cutting is completed, we have to keep the room temperature at 20-22 ℃, and then 9-27 days can take root.

two。 Leaf cuttings

The effect of leaf insertion is generally the best in summer and autumn, and the materials for leaf insertion should choose fully developed mature leaves. For larger species of leaves, the leaves can be placed flat on the sand bed, and the 1cm incisions can be made with a knife at the main vein in the center of the leaves. Each leaf can be cut 4-5 incisions, and then the leaves can be fastened to the sand surface with iron wire, that is, small plants can be cut from the length of the vein. It should be noted that in the process of cutting, rooting will be delayed if the soil temperature is lower than 15 ℃, but it will be difficult to take root when it is lower than 10 ℃.

3. Rhizome insertion

This kind of propagation method of rhizome insertion is more suitable for begonia with dense rhizome, which is generally best in spring and autumn. First of all, we should cut the lower rhizome into 3-5 cm a section and insert it obliquely or horizontally on the sand bed to produce adventitious roots and adventitious buds. Generally, adventitious roots can be produced 15-20 days after insertion, and adventitious buds can sprout in 30-40 days. When a few leaflets are formed, they can be moved into a small basin for maintenance.