How to cut wood fragrant flower, the cutting method / substrate drainage of wood fragrant flower is better.
Among the propagation methods of wood fragrant flowers, there are five methods: sowing, cutting, ramet, striping and grafting propagation, of which cutting propagation is a more commonly used method, and the survival rate is also relatively high. So how to cut wood fragrant flowers? What is the cutting method of wood fragrant flowers? Next, the editor will take you to learn about it.
First, how to cut wood fragrant flowers
The propagation method of wood fragrant flower is generally based on cutting propagation, about how to cut wood fragrant flower, there are many places that need to pay attention to, such as the time of cutting, the choice of substrate and cuttings, which are all places that people need to pay attention to. The details are introduced below, let's take a look.
2. Cutting methods of wood fragrant flowers.
1. The best cutting time is in spring and autumn.
Muxiang flower is a kind of plant with strong environmental adaptability, as long as the temperature is properly controlled, it can be cut all the year round. However, relatively speaking, if cutting is carried out in spring and autumn, the survival rate is relatively high, because the climate of these two seasons is more suitable for its growth.
two。 The selection of matrix and good drainage
Before cutting propagation, we first need to select the substrate, which is suitable for its growth can improve the survival rate. Generally speaking, it is best to choose a relatively loose and fertile humus soil as the substrate, because this kind of soil has good drainage and air permeability, which can better absorb nutrients and is not easy to accumulate water.
3. Matrix disinfection, high temperature disinfection
After we have selected the soil, we also need to disinfect it so as not to infect the plant with bacteria. During disinfection, we can break it up and lay it out in the sun. In addition, you can also put it in a pan and stir-fry, so that even if it contains bacteria, it will be wiped out because of the high temperature.
4. Selection of cuttings and branches with strong growth
The selection of cuttings also has a great impact on the survival rate of wood flower cuttings. in general, it is better to choose branches with relatively robust growth and no diseases and insect pests as cuttings. If the branches we choose look very slender, then we can basically judge that the cuttage failed, so the selection of cuttings is a very important step.
5. The cutting method can take root in about one and a half months.
The cutting method of wood fragrant flowers is relatively simple to operate. first of all, we can use chopsticks to cut a hole in the basin soil, and then insert the cuttings into it for watering. When watering, we should pay attention to watering thoroughly, and then we can take root in about a month and a half. This operation can avoid damage to cuttings, which is very practical.
How to cut wood fragrant flowers
First, the time of cutting
The time of cutting is generally chosen in early December, choosing the sturdy hardwood with the best development, but for new branches, it is usually carried out in June and July. But if the temperature can be controlled well, it can be cut all the year round.
2. Selection of branches by cutting methods
Select new branches or mature and healthy old branches, cut off the length of 12 cm to 15 cm in the middle of the branch, leave three or four buds and 2 leaves on the branch, and the other leaves can be removed.
Disinfection
For the selected branches, the incisions must be disinfected first, then stained with some plant ash to prevent decay, and need to be cut immediately after treatment to prevent the branches from wilting.
Temperature control
Put the branches that need to be cut into 2/3 of the soil and put them in a cool place. The temperature needs to be controlled between 20 degrees Celsius and 25 degrees Celsius, which is conducive to rooting. If the temperature is too low, it will take root very slowly, and if the temperature is too high, it will make the cuttings rot, so it is generally necessary to artificially control the temperature.
Moisturizing
After cutting, we also need to pay attention to ensure the wettability of the culture soil, need to spray water once or twice a day, not too dry nor too wet. In addition, pay attention to the ventilation of the environment must be good. Under normal circumstances, within a month and a half, it will take root and sprout, and it will be ready for transplanting.
III. Maintenance after cuttage
Muxiang flower especially likes the warm climate, the environment must be sunny and the air is moist, it can withstand cold and semi-cool climate conditions, but can not be flooded. The demand for soil is not high, but it grows fastest and best in deep, fertile and well-drained soil.
How to reproduce the wood fragrant flower, the propagation method / sowing / cutting / ramet / striping
Muxiang flower is a common flower plant in people's life, and it is cultivated in many areas of our country. However, with more and more people raising Muxiang flowers, people are more concerned about their reproduction. About how to reproduce wood fragrant flowers? What are the breeding methods of wood fragrant flowers? Next, the editor will take you to learn about it.
First, how to reproduce wood fragrant flowers, five breeding methods
When it comes to how to reproduce wood flowers, in fact, there are still many methods, mainly divided into sowing, cutting, ramet, striping and grafting propagation five methods, as long as the proper operation, the survival rate of this species reproduction method is very high. Their specific methods of operation are introduced in the following, the following editor to take you to understand.
Second, the propagation method of wood fragrant flower, sowing / cutting / ramet / striping / grafting
1. Sowing and reproduction
The seeds of Muxiang can be raised, but their seeds are difficult to survive, so this method is generally not recommended. Among the propagation methods of wood fragrant flowers, cutting propagation is a more commonly used method, and the survival rate is also higher, we can refer to this method.
two。 Cuttage propagation
Cutting propagation is a more commonly used propagation method, first of all, we need to select the branches of wood flowers with strong growth as cuttings, after selection, we should deal with them in time and then cut them immediately, so as not to wilt and affect survival. After the cuttage is finished, we should keep the temperature at 20-25 ℃, which can speed up its rooting time.
3. Ramet propagation
The ramet propagation of Muxiang flowers can generally be carried out in combination with changing pots, mainly by cutting off the small branches of the plant and the place where the mother plant is connected, and then planting them separately. the operation of this method is relatively simple, the survival rate is also relatively high, you can try.
4. Striping propagation
Striping is a method of pressing the branches and vines of a plant into the wet soil and separating it from the mother plant after it takes root to form a new plant. the survival rate of this method is also relatively high. However, its reproduction coefficient is small, and it is generally used when it is difficult to reproduce by other methods, or when it is necessary to reproduce larger new plants.
5. Grafting propagation
Grafting propagation is a less used method in the breeding methods of wood fragrant flowers, but it does not mean that its survival rate is low, as long as it is operated properly, the survival rate is also very high. The use of grafting propagation can generally blossom in the same year, and this method of propagation is more suitable for pot planting of wood flowers.
- Prev
How to reproduce the wood fragrant flower, the propagation method / sowing / cutting / ramet / striping
Muxiang flower is a common flower plant in people's life, and it is cultivated in many areas of our country. However, with more and more people raising Muxiang flowers, people are more concerned about their reproduction. About how to reproduce wood fragrant flowers? What are the propagation methods of wood fragrant flowers?
- Next
Parthenocissus parthenocissus pest control methods, 3 diseases 1 pest / prevention should start from daily maintenance
Although the breeding method of Parthenocissus is very simple, and its ability to adapt to the environment is also very strong, sometimes it will encounter the invasion of diseases and insect pests, once there is no good prevention and treatment, it is easy to cause plant wilt and death, then years of planting efforts will be wasted.
Related
- Fuxing push coffee new agricultural production and marketing class: lack of small-scale processing plants
- Jujube rice field leisure farm deep ploughing Yilan for five years to create a space for organic food and play
- Nongyu Farm-A trial of organic papaya for brave women with advanced technology
- Four points for attention in the prevention and control of diseases and insect pests of edible fungi
- How to add nutrient solution to Edible Fungi
- Is there any good way to control edible fungus mites?
- Open Inoculation Technology of Edible Fungi
- Is there any clever way to use fertilizer for edible fungus in winter?
- What agents are used to kill the pathogens of edible fungi in the mushroom shed?
- Rapid drying of Edible Fungi