How do Brazilian iron trees reproduce? the propagation methods of Brazilian iron trees / two kinds of cuttings survive easily.

As a kind of foliage plant introduced from abroad, Brazilian iron tree can be said to be loved by flower friends in recent years. It is not only good-looking, but also has amazing effect in purifying air and beautifying home, so it has been propagated in large numbers. Different plants have different methods of reproduction, so how do Brazilian iron trees reproduce? Next, let's go with the editor to take a look at the illustration of the breeding method of Brazilian iron tree.

First, how to propagate the Brazilian iron tree, mainly by cutting

When it comes to breeding Brazilian iron tree, there are generally three methods: cutting, striping and sowing. Among them, the cutting is on the Brazilian iron tree, choosing the trunk or branches as cuttings to insert into the soil; the pressing operation is complex and the survival rate is low, so it is not considered; as for sowing, it is not commonly used because it is difficult to get mature seeds after flowering. Next, the editor will introduce the cuttage propagation of Brazilian iron tree in detail.

II. Cutting Propagation of Brazilian Iron Tree

How do Brazilian iron trees breed? As a common foliage plant, Brazilian iron tree is generally propagated by cutting. According to the editor's inquiry, Brazilian iron tree cutting propagation can also be divided into two kinds: trunk cutting and twig cutting. The specific operations are as follows:

(1) Brazilian iron tree trunk cutting

1. Cuttings selection

Brazilian iron tree cuttings, the most important step is to select cuttings. You can choose a thick trunk with a diameter of 6-10 cm as cuttings on a potted Brazilian iron tree; of course, a trunk of more than 10 cm is fine, but to keep the trunk fresh, the color of the skin should be light yellow.

2. Cutting substrate

According to the growth habits of Brazilian iron tree, the cutting substrate can choose river sand, vermiculite or moss. The depth of the substrate is about 30 centimeters. Remember to disinfect it before cutting, which can avoid the emergence of Brazilian iron tree diseases and insect pests.

3. Cuttage starts

With the above preparation, the Brazilian iron tree cuttage can officially begin: insert the cuttings into the prepared substrate, with a depth of about 10-25 cm. Of course, the depth is mainly related to the degree of firmness. If the height of the cuttings reaches more than 1 meter, other main forms can be used to fix them in order to make the cuttings firm.

4. Maintenance after insertion

Because the Brazilian iron tree likes the humid environment, so after the cutting is finished, it should be watered in time to keep the soil moist. At the same time, the pot should be inserted to avoid the sun around noon, and new buds can be seen in about a month. When the new buds grow to 5 cm to 10 cm high, they can be planted, and then they can be maintained according to the breeding method of the Brazilian iron tree.

(2) Fine wood cuttings of Brazilian iron tree.

In addition to trunk cutting, cuttings of Brazilian iron tree cuttings can also choose twigs that grow healthily and are free of diseases and insect pests. When cutting, you can choose horizontal and vertical cuttings, keep the room temperature at 25-30 ℃, and new roots can grow in about a month. Note that all kinds of soil container tools should also be sterilized before cutting.

Generally speaking, cutting is the best way to breed Brazilian iron tree in the family. If a pot of Brazilian iron tree is a bit monotonous, you might as well try cutting with your own hands, which can not only increase the fun of breeding, but also make people happy when the cuttings survive. With regard to the breeding method of Brazilian iron tree, the editor has introduced this, hoping to give you some help.

What are the breeding methods and matters needing attention of Brazilian iron tree?

Content Abstract: Brazilian iron, recorded in the tequila family, is mostly used for greening. Plants are usually preserved in pots, alias as fragrant dragon blood tree, dragon blood tree, medium-spotted dragon blood tree, and so on. Brazilian iron tree culture methods and matters needing attention.

[culture method of Brazilian iron tree]

Breeding method

The survival ability of Brazilian iron tree plant is poor, and the propagation method can be directly based on cutting, and the best time is from May to June.

In early spring, the sturdy stem of the budding mature Tieshu gang can be cut off with a length of about 5-10 cm, and a sand bed is prepared at the same time, and the cut stem can be cut upright or straight.

In the process of breeding, it is necessary to ensure that the indoor temperature is above 25 degrees Celsius and below 30 degrees Celsius, which can be planted in the greenhouse directly to facilitate the control of temperature and humidity. After about a month, the plant will take root, and the plant can be maintained directly in the pot.

Secondly, you can also directly choose the water-based method, the cut stem, directly into the water, and its upper part covered with oil wax, can achieve the role of moisturizing, while the lower part of the water invasion part is about 3 cm. Keep the indoor temperature above 25 degrees Celsius, which can be potted after about a month.

Culture method

① pot selection: the growth of Brazilian iron tree is considered as a large plant, but because the plant is mainly growing upward, you can choose round flowerpots, material, color and so on.

② upper soil: the soil choice of Brazilian iron tree is mainly sandy soil, secondly, it can also be mixed with rotten leaf soil and nutrient soil, or the pot soil of adult Brazilian iron tree can be directly mixed with fresh soil, which is more beneficial to improve the survival rate.

③ on the basin: hold the rhizome of the Brazilian iron tree with one hand, pause about 3 cm from the bottom of the basin, and sprinkle it into the prepared soil. After covering the bottom of the basin with soil, take out the hand, continue to add soil, bury the root system of the plant, and compact the loose sand with both hands at the same time.

④ watering: after successful pot transplanting, it is necessary to irrigate enough fixed root water, spray it with liquid nitrogen fertilizer, and move it to the sunny place, mostly for outdoor maintenance. [matters needing attention in the cultivation of Brazilian iron trees]

Temperature and light

The best temperature for the growth of the Brazilian iron tree is 20-30 degrees Celsius, and when the temperature is below 13 degrees Celsius, the plant will enter a dormant period. When the temperature is below 5 degrees Celsius, the plant will appear frostbite, and chloasma will first grow at the leaf tip. In severe cases, the root system will rot directly.

When the temperature is too low, the plastic bag can be wrapped at the top of the plant to achieve the temperature control effect, but when the daytime temperature is restored, the plastic bag should be removed in time to absorb light, while when the temperature is above 40 degrees Celsius, shading treatment is needed to avoid burns.

Placement position

The Brazilian iron tree is mainly placed in the southeast, which can ensure that the plant can fully enjoy the light throughout the year, but once it enters the late October, it is necessary to move the plant indoors to avoid exposure to early frost.

Fertilizer and water management

Brazilian iron tree is a fertilizer-loving plant, without professional nutrient solution maintenance, only need to find plant fertilizer, once a month can be fertilized, watering time is 3-5 days. When the summer climate is hot, you need to spray water to the page every day to cool down and shade.

Illustration of propagation methods of Brazilian wood _ complete collection of Brazilian wood pictures

Brazilian wood is a very popular indoor large potted plant, it is often raised by people in the living room, study, bedroom and other living rooms for breeders, giving people an elegant style, but also with some rustic feeling, but also with some southern flavor in it. The plant character of Brazilian wood is very beautiful and neatly arranged. It is a very famous indoor foliage plant in the world. How much do we all know about Brazilian wood? Let's take a look at the illustration of the breeding methods of Brazilian wood, as well as a complete collection of pictures of Brazilian wood. [Brazilian wood photo collection-introduction] Brazilian wood, also known as Brazilian iron tree, fragrant dragon blood tree, Brazilian millennium tree and so on, is an evergreen tree plant of Liliaceae. The height of Baixi wood is generally more than 6m, and the height of potted plants is generally at 50-60cm, which can be branched in the process of growth. Its leaf clusters grow at the top of the stem, the length side is 40-90cm, the width is 6cm-10cm, the shape of the bow is curved, the color of the leaves is bright green, very glossy. It blossoms, but it is very small, with a touch of fragrance, and is a very famous foliage plant. Brazilian wood originates in western Africa and is distributed in China's Yunnan, Hainan, Guangxi, Thailand, Indonesia, America and other countries. The plants of Brazilian wood are very beautiful and neatly arranged, with a certain ability to tolerate shade. [Brazilian wood photo collection-growth habits] Brazilian wood likes to grow in a hot and humid environment, it is very adaptable to light, and likes to grow in an environment with plenty of sunshine and a little shade. More photosynthesis can be carried out in spring, autumn and winter, and should be placed in a shaded and ventilated place in summer. Shade is more conducive to the growth of Brazilian wood. Brazilian order vitality is very strong, as long as enough sunlight, air, a little water, it can rely on its own potential energy to survive, but also grow very luxuriantly. Baixi wood is resistant to drought, but not resistant to waterlogging, and should be irrigated with sufficient water during the growing period. Brazilian wood is afraid of cold and should be placed in a sunny environment to grow in winter. in winter, its most suitable temperature is 5-10 degrees Celsius, which must not be lower than this temperature, otherwise it will affect its growth and reduce its ornamental value. [Brazilian wood photo Daquan-Brazilian wood propagation method diagram] Brazilian wood propagation methods can be used by cutting method and water culture method, the use of these two methods are best carried out in May-August. You can use a bucket or a larger flowerpot, then put in the cultivated coarse sand or vermiculite to make a very simple slotting machine, and then insert one-third of the Brazilian wood cuttings into it. In the process of breeding, you need to spray water frequently to maintain the humidity of the Brazilian wood bed. Its temperature is generally kept at 21-24 degrees Celsius, which is more conducive to Brazilian wood cuttings taking root and sprouting. The top position of Brazilian wood leaves takes root relatively quickly, and it can take root in a month or so in the world. If the stem segment grows slowly at the root, it will take 2-3 months. When it is found that there is a mother plant on the stem, it can be cut off, which is conducive to sprouting or the emergence of new branches. Cuttings can be cut when the height of new buds is above 15cm, and potted plants can be planted 2-3 weeks after rooting. Then the potted plants of Brazilian wood need to be managed accordingly, which is more conducive to the growth of plants. Conclusion: Brazilian wood is a kind of foliage plant which is very popular with people's environment. It is very easy to breed, so it doesn't take us much time. In the process of breeding, we can do some simple maintenance. The above is the illustration of the reproduction method of Brazilian wood introduced by Xiaobian, as well as a simple appreciation of the complete collection of pictures of Brazilian wood. I hope the introduction of Xiaobian will be of greater help to you when cultivating Brazilian wood. if you still want to understand the conservation methods of Brazilian wood, then please go to the editor's website to inquire about it, the methods and steps are very detailed, thank you for your appreciation.

More information about the role of dripping Guanyin Culture methods of Fusang Mimosa poisonous mandala pictures of Cymbidium