How to propagate Jasminum, the propagation method / sowing / cutting / ramet of Jasminum

Jasminum is a kind of flower plant produced in Yunnan Province, China. Nowadays, there are many people raising it in various provinces of our country. With more people breeding it, people are more concerned about its reproduction. How to reproduce Jasminum? What are the breeding methods of Jasminum? Next, the editor will take you to learn about it.

How to propagate, sow / cuttage / ramet of Jasminum

When it comes to how to reproduce Jasminum, in fact, it can be divided into three methods: sowing propagation, cutting propagation and ramet propagation. As long as we operate properly and carefully, the survival rate of the three propagation methods is very high. In the following, there are details about the three breeding methods, which can be found out by interested friends.

Second, the propagation method of Suxin flower.

Sowing and reproduction

Seed harvest: Jasminum this plant does not have much fruit, and there is only one seed in each fruit. Its fruit usually matures in December, and when it matures, the fruit will blacken. At this time, we can harvest. After harvest, take out the pulp outside, take out the seeds and put them in a dry place to dry and store them. Wait until the next spring to sow.

Sowing method: among the reproduction methods of Jasminum, sowing and reproduction is a more commonly used method. First of all, we should apply appropriate amount of base fertilizer in the soil, then sow the seeds on the soil surface, and then cover the soil with 1-2cm after sowing. When watering, it is best to use the soaking pot method, because the seeds of Jasminum are relatively small, and the seeds will be washed away if they are watered directly from above.

Cuttage propagation

Cuttage selection: we should first choose cuttings before cutting propagation of Suxin flowers. Generally speaking, it is best to choose branches with stronger growth as cuttings, so that the survival rate will be higher. If we choose branches that look very slender, then it is basically difficult to survive. After selecting the cuttings, we have to prune the leaves at the bottom and retain the upper 2-3 leaves for cutting.

Cutting methods: we can choose when cutting in spring, spring is the season of recovery of all things, the climate is not moderate, choose at this time for cutting survival rate is still very high. Before cutting, we should first use chopsticks to cut a thick hole in the soil, and then water the cuttings thoroughly. This operation can avoid damage to the cuttings during insertion, which is very practical.

Ramet propagation

The ramet propagation of Suxin flower can generally be carried out in combination with changing pots. When we split the plant, we can pull out the overgrown mother plant from the basin soil, then cut it into several clumps, put it into pots separately, and plant them along with them. It is very easy to survive. Generally, it is a complete pot of foliage flowers after putting on the pot.

How to grow Jasminum, the planting method of Jasminum / seed collection in December / planting in early spring

Among the propagation methods of Jasminum, it is mainly divided into three methods: sowing propagation, cutting propagation and ramet propagation, of which sowing reproduction is a more commonly used one, and the survival rate is also very high, so how to plant Jasminum? What is the planting method of Jasminum? Next, the editor will take you to learn about it.

First, how to plant Jasminum flowers carefully

When it comes to how to plant Jasminum, there are many things we need to pay attention to, such as the selection of substrate, the harvest of seeds, the methods of planting and so on, and the most important thing is to be careful in the breeding process. Only in this way can we strive for excellence, and the survival rate will naturally be high. As for the specific planting details in the following, let's take a look.

II. Planting methods of Jasminum

1. Seed harvesting

Jasminum does not have much fruit, and there is only one seed in each fruit. Its fruit usually ripens in December and blackens when it is ripe. At this time, we can harvest it. After harvest, take out the pulp outside, put the seeds in a dry place to dry and store them, and wait until the next spring to sow.

two。 Matrix selection

Before we plant vegetarian flowers, we first need to choose the substrate, which is a step to lay a good foundation, which is very important. Generally speaking, it is best to choose loose and fertile sandy loam as the matrix, which has good drainage and air permeability. It can make the plant better absorb nutrients and is not prone to stagnant water.

3. Seed initiation

In addition to the above two points, there is another pre-treatment that we need to do before planting vegetarian flowers, that is, to promote the release of its seeds. We can take out the stored seeds, then soak them in warm water for 12-24 hours, and then take them out after they begin to absorb water and swell, so that the seeds can germinate more quickly.

4. Planting method

When we plant vegetarian flowers, we should first apply an appropriate amount of base fertilizer to the soil, then sow the seeds on the soil surface, and then cover the soil with 1-2cm after sowing. It is best to use the soaking pot method when watering, because the seeds of Jasminum flowers are relatively small, and if they are watered directly from them, the seeds will be washed away.

5. Subsequent management

After we have successfully planted according to the above methods, when the seeds germinate, we need to carry out daily maintenance of Suxin flowers. During conservation, we need to pay attention to the regular application of water and fertilizer, pay attention to light management, and so on. For details, you can refer to the article on the breeding methods of vegetarian flowers, in which there are detailed conservation teaching.

Introduction to the cultivation methods of Jasminum flowers, and the corresponding points for attention. Do you understand Jasminum flowers? The flowers of Suxin flowers bloom with luxuriant branches and full branches. Small and lovely flowers are deeply loved by people. recently, many friends have asked what are the cultivation methods of vegetarian flowers. Don't worry about the editor today. I'll take you to understand the introduction of the cultivation methods of Jasminum flowers, as well as a summary of the corresponding points for attention.

Cultivation techniques of Jasminum

Jasminum flowers are widely cultivated all over the world.

Seed propagation

Jasminum flowers bear few fruits, the fruit is nearly the size of a bowl of bean seeds, and there is only one seed in a fruit. The seeds are harvested when the fruit is fully blackened and ripe in the winter month, and after harvest, the outer pulp is placed in a ventilated and dry place and sowed before and after the Spring Festival season; the seeding bed is made on fertile and loose sandy soil, and the soil is covered with 1cm after sowing in shallow trenches with 15cm row spacing or sowing in shallow ponds with 15cmx15cm. After sowing, cover a layer of pine needles or straw to prevent the seeds from exposing the soil during watering, then sterilize, pour through water, moisturize and increase temperature with plastic film in the small arch shed, and seedlings can come out of the nursery after careful management and protection for half a year.

Cuttage propagation

Jasminum cutting seedlings can propagate a large number of seedlings in a short time. The cutting time should be in the middle of January (about 20 days before the Spring Festival), and the cutting time in the open field should be in the rainy season between Grain in Beard and Greater Heat in June and July. When cutting, select 1-2-year-old young and strong branches on the periphery of the mother plant, cut flat in the middle of two leaf nodes, cut into cuttings with 2-3 leaf nodes (if too tender branches are not suitable for cutting in summer), the cuttings are generally 8-12cm long, and the leaves with flower buds and lower 1-leaf nodes are removed, such as sealing the top cut with wax or plastic film. When the lower part of the cuttings were soaked in 510 000 naphthalene acetic acid or 1/10000ABT1 rooting powder for 1 hour, the cuttings were inserted into the sandy loam seedbed with less humus sterilized by carbendazim and other fungicides, and the cutting depth was that the leaves left from the soil should be properly shaded, temperature and humidity management. if the seedlings were raised with plastic film in a small arch shed, the seedlings should be ventilated in time in high temperature to prevent seedling burning. Generally, adventitious roots are produced at the lower leaf nodes and new buds are produced at the upper leaf nodes after 30 days of cutting. after 90 days, the seedlings can be planted in bags or dug out of the nursery half a year later.

Ramet propagation

Jasminum flower plant propagation is more simple and easy, and it is suitable for a small amount of planting in ordinary families. When ramet multiplying, select the sprouting seedlings with series roots around the mother plant to pry out the roots, cut off the part of the vine above 10-50cm, then fasten and seal the top with plastic film to form a new seedling, which can be directly used for planting. If it is planted at the beginning of spring, buds can appear in the winter of that year, and a large number of flowers can bloom in the next spring.

Planting management

Jasminum cultivation can be divided into courtyard, guardrail planting and balcony pot planting. Planting in the courtyard only needs to dig a pond at the foot of the wall and plant 3-5 wires with a length of more than 2m for climbing; it can also be planted under the rattan to enjoy the cool. The balcony potted plant chooses a larger flowerpot and is planted with ripe chemical fertilizer soil. After planting, two 2m-long small white bamboos and purple bamboos are inserted in the flowerpots for them to climb. However, due to the lack of soil in flowerpot planting, the pot soil should be completely or partially replaced after 2 or 3 years of planting. Replace the pot soil with hand-held plastic bags to take loam, add 1 to 3 chicken manure, sheep manure and other farm manure mixed, watering until the hand is not dripping, tie the mouth of the plastic bag tightly in the sunny place to ferment and mature for 20-30 days, pry out most of the old soil in the flowerpot and replace it with fermented fermented soil.

The above is my introduction of the cultivation methods of Jasminum flowers, as well as the corresponding summary of matters needing attention. I hope it can be helpful to the majority of flower friends, and please continue to pay attention to the succulent flower bed and learn more about flower conservation.