MySheen

How to grow bowl lotus and teach you in a few steps

Published: 2024-11-21 Author: mysheen
Last Updated: 2024/11/21, Bowl lotus, usually refers to the small and medium-sized type of lotus, perennial aquatic plants with nodular rhizomes, flowering from June to September, with red, pink, white, purple-yellow, green and other colors, or color lines, edge. No matter what variety it is, the cultivation and cultivation of bowl lotus is very simple.

Bowl lotus is a small version of lotus, like plenty of sunshine, summer is their competitive blooming season. Round leaves on the lotus stem, like an acrobatic little girl happily performing acrobatics on the stage, with the breeze gently swaying the slender waist, so graceful. Bowl lotus is generally planted indoors, fragrance overflowing, become a beautiful scenery of the courtyard, it seems to move the lotus pond into the home, it is very interesting.

Like lotus flowers in lotus pond, there are many different varieties, such as apricot yellow, rose red Chongtai, Qinglian girl, little dance concubine, Yangcheng bowl lotus, Snow White and so on. The color and shape of flowers from different varieties are also different. Although there are so many varieties, the planting methods are roughly the same.

First of all, selecting a good seed is one of the most basic steps, because good seeds can germinate and grow better. We can buy a bowl of lotus seeds in the market, a dark gray oval seed. In the face of so many seeds, we must choose mature, full, bright and flawless seeds.

Secondly, because the seed shell of bowl lotus is relatively hard, it is necessary to break the shell and accelerate germination so that the seed can germinate better and faster. Under the packaging of the hard shell, the seed is not easy to breathe, which makes it difficult for water and air to flow through its body, thus increasing the difficulty of germination. We can cut a small opening at the top of the seed with scissors or other tools, not too deep so as not to hurt the embryo.

Then, after soaking in clean water (to make the seeds germinate faster and better, you can use 20-50 degrees warm water), let the seeds swell and soften by absorbing water, and then gently peel off a little bit along the small opening to facilitate the extension of the germ. In order to promote germination, soak the seeds in clean tap water for about 3 days, change the water 1-3 times a day, and wait for germination.

Then, wait for the seeds to germinate and begin to raise seedlings. Put the germinated seeds in clear water for about six days, keep the water deep and submerge the seeds, and place them in a sunny place. Do not often change water in the process of raising seedlings, be quiet, wait for lotus leaves to grow quietly and float on the surface, and slowly grow white roots before they can be planted.

Finally, the bowl lotus is planted. Keep the lotus seedlings in the muddy water that already contains soil and fertilizer. The seeds must be buried, the leaves float on the surface of the water, and the whole flowerpot can be placed in a sunny place.

How to grow bowl lotus? Detailed explanation of the planting method of bowl lotus

Not long after the passing of the Beginning of Summer in the 24 solar terms, the hot temperatures came in bursts of heat. And this is also a good time to grow bowl lotus. I believe that many flower friends must have raised a bowl of lotus experience, but for a long time, the leaf growth is not very good, and basically can not see it bloom. Don't worry, today the editor of Huinong Network will teach you how to plant a good bowl lotus.

Seed treatment

The first and most critical step in our planting bowl lotus is to break the shell of the seed. This is because the shell of the lotus seed is hard and dense. After the seed is fully ripe and dried, the water and air are not easy to penetrate, and the respiration is very slow. In a state of forced dormancy, the seeds must be broken before they germinate.

One section of the lotus seed is a small tip, and the other end is concave. We need to rub the concave end on the rough ground or break a small opening with pliers. We must be careful when dealing with it to avoid pinching the germ.

Soaking seeds to accelerate germination

Find a container of the right size and soak the treated seeds in warm water. Pay attention to the cleanliness and temperature of the water. Too high and too low are not conducive to seed germination. Change water frequently, usually 2-3 times a day, and it is most appropriate to control the water temperature at about 20-30 degrees.

In this growth environment, seeds usually sprout in about 3 days. If the seed has not germinated after a week, then it may be a bad species, and the probability of germination is small, so we can soak a few more seeds.

After a few days, we can peel the shell of the budding lotus seed to half of the lotus body, which is more convenient for the buds to drill out, and remember not to peel off all the shells.

Hydroponic seedling cultivation

After the seeds sprout, the seedlings should be cultured in water under the condition of about 25 ℃, about five days. In the process of hydroponic breeding, we should keep the water layer about 10 cm deep and give sufficient light. At this time, you do not need to change the water all the time, and do not turn it with your hands. Flower friends who are busy should pay attention.

When the root of the petiole grows white and healthy, it means that the seedling is almost done and can proceed to the fourth step.

Seedlings into the mud

This is the most critical step in growing bowl lotus. Many flower lovers think that water lilies can be hydroponically cultivated and do not need to grow in mud, which is wrong and is an important reason why water lilies do not grow well and do not blossom.

When a bowl of lotus grows, we generally choose pond mud as the best choice. Find a larger container, put the pond mud in and add water, and mash the large pieces of pond mud with tools. Put the lotus seeds in a container, all the seeds should be buried in the pond mud, so that the leaves stretch freely on the surface of the water. The bowl lotus likes the light, only receives the sufficient light, this is beneficial to its growth.

It is not suitable for too strong light at this time, it will burn the seedlings. Don't water too much to raise the temperature of the water and promote growth. When we water, we must not directly inject water, this will wash away the lotus seed, you can cover it with your hands and slowly inject it along the wall of the container.

The root system of bowl lotus will grow rapidly in the mud, and it is also excellent to watch it at this time, which can add a sense of green to the hot summer. As long as adequate light and care are given, the bowl lotus will blossom soon.

The above is the detailed explanation of the bowl lotus planting technology arranged by the editor of Huinong net. Have you learned all about it? If you want to know more about planting techniques, please follow Huinong School!

How to grow bowl lotus? the planting method of bowl lotus

If you can see a green plant when you are busy, you will find that it not only brings good decoration to your office environment or home life, but also relieves eye fatigue. And different people have different needs for plants, so the author introduces you a bowl of lotus, a plant that can be placed on the table, how about the breeding method? The author made a brief introduction for all users, let's take a look at it!

Introduction of bowl lotus

Bowl lotus can be cultivated in the bowl of lotus, is a kind of office decoration for users, its function is to beautify the environment. It not only decorates the environment, but also has a good effect on relieving eye fatigue. The bowl lotus was originally produced in Jiangsu Province. The flower of the plant is petite and Lingling. Users only need to prune when the branches and leaves are luxuriant, thus showing a different decorative effect for all users.

Planting method of bowl lotus

The planted bowl lotus not only has a good decorative effect, but also can be pruned by oneself in the later training, which can feel different fun. If you do not know the planting method of bowl lotus, that is just right, the author is to sort out the container, soil, light and other conditions, let's take a look! 1 continuous planting: the skin should be broken before planting, and the skin can be opened in the sunken buttocks. You only need to see the dark brown embryo skin. 2 containers: too large and too small containers are not suitable for bowl lotus culture, so users can choose containers with a diameter of 25-35cm and a depth of 20--25cm. 3 soil: fertile river pond mud is the best for cultivation, and black immortal soil can also be used instead. 4 Illumination: when raising bowl lotus, we must pay attention to ensure sufficient sunlight, if it is placed indoors for a long time, without sunlight, it will lead to the plant can not grow healthily, because the lighting time of the plant should be reasonably controlled. 5 amount of water: the amount of water is determined according to different growth time, not too much water at the initial stage, and when the plant grows up, the bowl needs to be gradually filled with water, thus adapting leaves are used for photosynthesis. 5 fertilization: bowl lotus prefer fertilizer, so in the growth, we should pay attention to fertilization, so as to ensure the healthy growth of the plant.

Matters needing attention of bowl lotus

In the cultivation of bowl lotus, it should be noted that if the branches and leaves develop to a certain extent, they should be pruned so that the plant can achieve the effect of decoration. Secondly, we should also pay attention to the prevention and control of diseases and insect pests, and the more common diseases are rot, leaf rot, spot rot and so on. Therefore, users need to take correct methods to ensure the healthy growth of plants.

What to do with arrows in Gentleman's Orchid? how do orchids grow saffron pictures? culture methods of colorful leaf grass

 
0