The reason why Phoenix tail orchid does not blossom:
In the north, especially in the northeast and northwest regions, there are a lot of land-planted Cymbidium will appear only leaves do not blossom phenomenon. The reason why Phoenix tail orchid does not blossom has something to do with the climate of these areas and so on.
Due to the influence of temperature and other conditions, the Phoenix tail orchid cultivated in the north will be dormant for at least 5 months after a year. Cymbidium itself is an evergreen plant, growing all the year round, basically no dormancy period, so that it can accumulate enough nutrients to meet its needs for growth and flowering. But in these areas, the dormancy period of Cymbidium is too long, the growth period is only a short period of 6 or 7 months. Therefore, it can not accumulate enough nutrients, so it is difficult to blossom naturally.
Knowing the reason why the Phoenix tail orchid does not blossom and the correct method of watering it, do you have more confidence in maintaining it?
What if the Phoenix tail orchid doesn't bloom?
The reason why Phoenix tail orchid does not blossom
In the northern part of China, especially in the northeast and northwest of China, many orchids planted here only grow leaves but do not blossom, which is very common.
The reason why Phoenix tail orchid does not blossom has something to do with the climate of these areas and so on.
Due to the influence of temperature and other conditions, the Phoenix tail orchid cultivated in the north will be dormant for at least 5 months after a year. Cymbidium itself is an evergreen plant, growing all the year round, basically no dormancy period, so that it will accumulate enough nutrients to meet its needs for growth and flowering. But in these areas, the dormancy period of Phoenix tail orchid is too long, the growth time is only a very short 6pm 7 months, so it can not accumulate enough nutrients, it is naturally difficult to blossom.
What if the Phoenix tail orchid doesn't bloom?
In fact, in these areas, it is not impossible to let Cymbidium blossom, because the main problem is the temperature, so it is necessary to change the temperature conditions. There are three ways.
The first kind is to carry on the potted plant, the form of the potted plant is more flexible, the potted plant of Phoenix tail orchid can be moved to a bright place indoors when the weather becomes cold, and the room temperature should be kept high.
The second kind is still planted in the Phoenix tail orchid field, but it can be dug out and put into a basin and moved indoors before Frosts Descent. It will be planted in the basin in the spring of the following year, and it can usually blossom before the National Day.
The third is to plant it on the south side of the house, which can prolong the growth time of Cymbidium. If you want to spend the winter in the open field, you need to take good measures to keep warm. Generally, October of the second year can also blossom.
Introduction of Yucca gloriosa L Yucca gloriosa L Magnolia: how to raise Cymbidium / how to breed Cymbidium Business Card Yucca gloriosa L Cymbidium introduction of Cymbidium also known as Magnolia, Tequila family, is a shrub or small tree. Plant height 50~150cm, with stem, sometimes branched, leaves dense, spirally arranged stem tip, hard, powdery, sword-shaped, 40-70cm long, tip hard-pointed, margin smooth, old leaves sometimes sparsely filamentous. Panicle more than 1m high, flowers large and drooping, milky white, often with red halo. Capsule dry, pendulous, elliptic-ovate, indehiscent. The florescence is from June to October. It is native to the east and southeast of North America and is cultivated in the south of North China. Strong adaptability, resistance to water and moisture. The wind-tailed orchid tree is beautiful and green, which is a good ornamental tree in the garden. Cymbidium is native to the eastern and southeastern part of North America and is now widely planted in the Yangtze River Basin. Strong adaptability, resistance to water and moisture. Cutting or branch propagation, the aboveground stem is cut into pieces of water and raised in a shallow basin, and buds can be developed to make pile scenery. Wind-tailed orchid trees are beautiful and green, which are good ornamental trees in the garden. They are often planted in the center of flower beds, in front of buildings, in lawns, roadsides and hedges. The leaf fiber has strong toughness and can be used for making cable. Phoenix tail orchid has good flowers and leaves, extensive management, indoor and outdoor planting, is a kind of high ornamental flowers. The leaves of Cymbidium are dark green, with a waxy layer on the surface, and are as hard as swords; the leaves of the ground-cultivated plants are 40 to 70 cm long and 3 to 6 cm wide, spirally arranged in dense clusters on the short stems and spreading radially. Summer and autumn pull out stout flower stems from the base of leaves, more than 1 meter high, panicles, each inflorescence with 200 to 400 flowers, gradually opening from bottom to top, milky white, cup-shaped, drooping. Phoenix-tailed orchid is Yang-loving and yin-resistant, and can be watched in the foyer with sufficient scattered light. It is not strict with the soil, and the fertile and loose sandy loam is the best. Phoenix tail orchid is not demanding on the type and amount of fertilizer. When potted, nitrogen, phosphorus and potassium compound fertilizer should be applied once or twice in spring and autumn, and no fertilizer should be applied in winter and summer. The method of dividing plants can be used to propagate Cymbidium. Cymbidium plants cultivated for many years will sprout small plants from the roots. When the small plant grows up slightly, cut it away from the mother plant. Those with roots can be planted directly, and those without roots can be used as cuttings; smear sulfur powder on the incision, then plant it in sterilized plain sand and place it in the shade. Take root after about 50 days and move to a sunny place for cultivation. Phoenix tail orchid is strong in nature, rarely occurs diseases and insect pests and has strong resistance to sulfur dioxide, hydrogen fluoride, chlorine and ammonia. At the same time, it can also absorb harmful gases. Cymbidium is suitable for planting in flower beds, lawns or rockery; family cultivation can be grown in larger pots; small plants with sprouting tillers can also be cut from the roots, planted in small flower bowls and placed on several tables. Flower language: the place of hope in full bloom: originated in eastern and southeastern North America. It is widely cultivated in open field in warm areas. Morphological features: Phoenix tail orchid perennial dark green, several clumps, high and low, flowering stems towering, a variety of white flowers drooping, graceful posture. Distribution and habits: native to eastern and southeastern North America. Like warm, humid and sunny environment, cold tolerance, shade tolerance, drought tolerance and moisture tolerance, lax soil requirements. Application: it can be arranged in the center of the flower bed, by the pool, near the slope and near the building. Phoenix tail orchid is the national flower of the Seychelles. The morphological characteristics of Cymbidium, also known as Magnolia, Magnolia of the tequila family, is a shrub or small tree. Plant height 50~150cm, with stem, sometimes branched, leaves dense, spirally arranged stem tip, hard, powdery, sword-shaped, 40-70cm long, tip hard-pointed, margin smooth, old leaves sometimes sparsely filamentous. Panicle more than 1m high, flowers large and drooping, milky white, often with red halo. Capsule dry, pendulous, elliptic-ovate, indehiscent. The florescence is from June to October. It is native to the east and southeast of North America and is cultivated in the south of North China. Strong adaptability, resistance to water and moisture. There are clusters of tree-shaped plants. Stems dangling, up to 50 cm long, internodes 1.5-2 cm long. Leaves distichous, inserted on full length of stem, slightly fleshy, narrowly lanceolate, 7-10 cm long and 1.2-1.5 cm wide, apex acute, base with clasping sheaths. Racemes short, opposite leaves along nodes of stem, with 3-6 flowers, peduncle ca. 3-6 mm; floral bracts broadly triangular, ca. 2 mm long; flower pedicels and ovary ca. 5.5 mm long; flowers white, extended; middle sepals oblong, 7 mm long, 2.5 mm wide, apex acute; lateral sepals obliquely ovate, 6 mm long, 4 mm wide, apex acute, base attenuated. Petals falcate-oblanceolate, 7 mm long, 2 mm wide, apex slightly acute; lip thickly fleshy, 3-lobed; lateral lobes purple, erect, triangular, very small, apex obtuse; middle lobe white purplish apex, broadly ovate, curved upward, ca. 1 mm long, 2.5 mm wide, apex obtuse, base (in front between two lobes) with a tongue-shaped hairy fleshy process. Spur conical, about 2.5 mm long, with a tongue-shaped appendage on the inner dorsal wall. The leaves of Cymbidium are dark green, with a waxy layer on the surface, and are as hard as swords; the leaves of the ground-cultivated plants are 40 to 70 cm long and 3 to 6 cm wide, spirally arranged in dense clusters on the short stems and spreading radially. Summer and autumn pull out stout flower stems from the base of leaves, more than 1 meter high, panicles, each inflorescence with 200 to 400 flowers, gradually opening from bottom to top, milky white, cup-shaped, drooping. The ecological habits of Phoenix tail orchid like warm, humid and sunny environment, cold-resistant, shade-tolerant, drought-tolerant and moisture-tolerant, and the soil requirements are not strict. It has strong resistance and absorption ability to harmful gases such as SO2, HCl, HF and so on. The experiment shows that when the average daily concentration of sulfur dioxide is 0.15ml ∕ cubic meter, many trees such as pine and cypress, heather, Yingchun, paulownia and so on have serious damage symptoms, while Yucca is still tall and strong. Silk orchid also has a strong ability to absorb hydrogen fluoride, according to the determination, 1 kg of dried leaves can absorb 266 mg of fluorine. Phoenix tail orchid is strong, cold-resistant, drought-resistant, moisture-resistant, barren-resistant, and has low requirements for soil and fertilizer. Like the sandy loam with good drainage, the barren and stony waste land can also be adapted. It can adapt to a wide range of acidity and alkalinity and can grow except saline-alkali soil. I like light. Anti-pollution, strong sprouting power, strong adaptability, the tip stops growing after flowering, and lateral buds occur on the side of the leaf scar. Strong growth, strong fleshy roots, stems easy to produce adventitious buds, easy to grow and sprout, expand plants, strong regeneration ability. Phoenix-tailed orchid is Yang-loving and yin-resistant, and can be watched in the foyer with sufficient scattered light. It is not strict with the soil, and the fertile and loose sandy loam is the best. Phoenix tail orchid is not demanding on the type and amount of fertilizer. When potted, nitrogen, phosphorus and potassium compound fertilizer should be applied once or twice in spring and autumn, and no fertilizer should be applied in winter and summer. The cultivation techniques of Cymbidium can be planted because the leaves of Cymbidium are dense and extensive, and the top is sharp, so it can be tied up first when digging, bare root or with lodging soil. Apply sufficient base fertilizer before planting, water thoroughly after planting, release the binding, and release the leaves. Maintenance and management is very simple, only need to trim the withered branches and leaves, and cut off the pedicels in time after flowering. Manage the plants bred by cuttings and individual plants, dig them up and plant them with lodging soil, as long as they are watered several times, they can survive. Daily management should pay attention to proper soil cultivation and fertilization to promote the drainage of inflorescences; when dead leaves and stumps are found, they should be pruned in time to keep them clean and beautiful. The pests of Yucca have coir moths harmful to leaves, so attention should be paid to prevention and control. The plants bred by management techniques of cuttings and individual plants will be dug up and planted with lodging soil. As long as they are watered several times, they can survive. It is easy to manage after planting, as long as the withered branches and residual leaves are cut off, the pedicels are cut off in time, and the plants are supported by wind and rain. Daily management should pay attention to proper soil cultivation and fertilization to promote the drainage of inflorescences; when dead leaves and stumps are found, they should be pruned in time to keep them clean and beautiful. When the plant growth is too high or the growth potential is weakened, it can be replanted and renewed. The propagation mode of Cymbidium can be propagated by sowing, dividing plants and cutting. The ramet Cymbidium can be planted when the root tillering buds are exposed to the ground from February to March in spring. When planting separately, it is best to have some meat roots on each bud. First dig the pit to fertilize, and then bury the separate tiller buds among them, do not bury the soil too deep, just cover the top slightly. You can also cut off the part of the clustered leaves at the end of the stem, take a section of the stem with a length of 9-12cm, remove part of the leaves, leave about 7 leaves, bury them in a pit deep in 12-15cm, and water them after burying. As the leaves of Phoenix tail orchid are dense and widely spread, the top is sharp, it is bound when the seedlings are raised, and the bare roots can take persistent soil. Cymbidium plants cultivated for many years will sprout small plants from the roots. When the small plant grows up slightly, cut it away from the mother plant. Those with roots can be planted directly, and those without roots can be used as cuttings; smear sulfur powder on the incision, then plant it in sterilized plain sand and place it in the shade. Take root after about 50 days and move to a sunny place for cultivation. Cutting cutting, in spring or early summer, dig stem, peel off leaves, cut into 10 cm long, stem thick can be cut into 2-4 pieces, trench flat, longitudinally cut face down, cover 5 cm, maintain humidity, sprout 20-30 days after planting. Ramet, the leafy stem is dug and planted directly every spring and autumn. When sowing Cymbidium, seed reproduction can only be realized by artificial pollination. Artificial pollination is better in May, and the seeds mature about 70 days after pollination. After sowing in late September of that year, seedlings emerged in one month, and the emergence rate was more than 40%. The seeds can also be dried and sown in spring. Cuttings are easy to survive. In spring or early summer, take the stem to remove the leaves, cut off the leaves according to 10 cm per section, the thick ones can be cut into 2 or 4 pieces longitudinally, the trenches can be cut horizontally, the longitudinal section is facing down, and the cover soil is 10 cm thick. After planting, pay attention to the soil not to be too wet to prevent the stem from rotting. It is better to use fleshy root as cutting material. Phoenix tail orchid in the lower reaches of the Yellow River and its south area, can be open field overwintering. As the leaves of Phoenix tail orchid are dense and extensive, and the top is sharp, they should be tied up first when digging, bare roots or with lodging soil. Apply sufficient base fertilizer before planting, water thoroughly after planting, release the binding, and release the leaves. Maintenance and management is very simple, only need to trim the withered branches and leaves, and cut off the pedicels in time after flowering. After growing for many years, the stem is too high or tilted to the ground, which can be truncated and renewed. In autumn, ring ditches were dug around the plants and some organic fertilizers were applied. The disease control of Phoenix tail orchid often occurs the harm of leaf spot and leaf spot, which can be sprayed with 1000 times of methyl topiramate wettable powder. Insect pests include scale insects, whitefly and night moth, which can be sprayed with 1000 times omethoate EC. How to control Cymbidium anthracnose is a frequent disease of Cymbidium, which spreads very fast. if the disease is not prevented in time, it will not only affect the ornamental effect, but also lead to plant death. The symptoms, regularity and prevention methods are introduced as follows: the symptoms first occur at the leaf tip, with brown spots at the beginning, then round or irregular outward expansion, grayish brown in the disease spots, yellow halos around, black grains scattered on the surface, and the whole leaf is black after being infected. The disease occurred by the infection of Cercospora tequila, and the peak period was from mid-May to early October. The pathogen overwintered on the diseased leaves in the state of hyphae, conidia and sclerotia and spread by wind and rain. The disease is easy to occur under the conditions of high temperature, high humidity and no ventilation. Control methods: 1, strengthen the management of water and fertilizer, enhance the tree potential, and improve the disease resistance of the plant; 2, pay attention to the selection of planting environment at the initial stage of planting, and the cultivation site should have a good ventilation environment; 3, remove the diseased leaves in time and burn them centrally. reduce the source of infection 4. Spraying 1000 times of 50% anthrax Fumei solution or 75% chlorothalonil wettable powder once a week for 3 times 4 times can effectively control the disease. The distribution area of Cymbidium is native to the eastern and southeastern parts of North America. It is widely cultivated in open field in warm areas. Cymbidium can be planted in the middle and lower reaches of the Yellow River and its south, and widely cultivated in warm areas. Introduced in the Yangtze River Basin and south of China and Shandong and Henan, it is widely planted in various parts of the Yangtze River Basin in China and has been widely cultivated and produced in Mianling County. Evergreen and deciduous broad-leaved forest from southern North China to South China (main cities: Wuhan, Shashi, Huangshi, Yichang, Nanchang, Jingdezhen, Jiujiang, Ji'an, Jinggangshan, Ganzhou, Shanghai, Changsha, Zhuzhou, Yueyang, Huaihua, Jishou, Changde, Xiangtan, Hengyang, Shaoyang, Guilin, Wenzhou, Jinhua, Ningbo, Chongqing, Chengdu, Dujiangyan, Mianyang, Neijiang, Leshan, Zigong, Panzhihua, Guiyang, Zunyi, Liupanshui, Anshun, Kunming, Dali), South subtropical evergreen broad-leaved forest (major cities: Fuzhou, Xiamen, Quanzhou, Zhangzhou, Guangzhou, Foshan, Shunde, Dongguan, Huizhou, Shantou, Taipei, Liuzhou, Guiping, Gejiu). The function and ornamental value of Phoenix tail orchid the leaf color of Phoenix tail orchid is dark green all the year round, several plants are in clusters of different heights, and the sword-shaped leaves are neatly arranged. They can be planted in the center of flower beds, next to rocks or platform slopes, and near modern buildings. Can also use its leaf tip thorn as a fence, or planted under the fence, shed. Phoenix tail orchid has strong resistance to harmful gases and can be used as landscaping and greening material in industry and mine. Flower bed applications can be arranged in the center of the flower bed, by the pool, near the terrace and near the building. Phoenix tail orchid is strong in nature, rarely occurs diseases and insect pests and has strong resistance to sulfur dioxide, hydrogen fluoride, chlorine and ammonia. At the same time, it can also absorb harmful gases. Cymbidium is suitable for planting in flower beds, lawns or rockery; family cultivation can be grown in larger pots; small plants with sprouting tillers can also be cut from the roots, planted in small flower bowls and placed on several tables. Fengwei Orchid is a good garden ornamental tree. It is often planted in the center of flower beds, in front of buildings, in lawns, roadsides and hedges. The leaf fiber has strong toughness and can be used for making cable. Phoenix tail orchid perennial dark green, flowers, leaves are beautiful, peculiar tree shape, several clumps, different height, leaf shape such as a sword, blooming stem towering, color white, a variety of white flowers drooping such as bell, graceful, long-lasting florescence, pleasant fragrance, is a good garden ornamental trees, but also a good material for fresh cut flowers. It is often planted in the center of flower beds, in front of buildings, in lawns, poolsides, terraces, buildings, roadsides and hedges. The leaf fiber is white, tough and water-resistant, which is called "white hemp brown" and can be used as a cable. Somatic hormones can also be extracted from leaves. The dietotherapy or medicinal value of Phoenix tail orchid the medical information and health dietotherapy information of Fengwei orchid are only for reference and can not be used as the basis of diagnosis and medical treatment. Any health problems should consult professional health care personnel, the treatment of any disease, please follow the doctor's advice. The ultimate task of protecting flowers: to love yourself, proceed from reality and follow the doctor's advice. For disease, do not be careless, do not postpone, do not give up hope, face it bravely, warm the silent world with love, and protect the inner flower field with your heart. The chemical constituents of Flos Lonicerae are smilagenin, tigogenn, gitogenin, tigogenin 3-O-β-D-xyloxylopyranosyl-β-ly-cotetraoside, gitogenln 3-O-β-D-xylose-β-lycotetraoside. Gitogenin 3-O α-L-glucopyranosyl-β-lycotetraoside, cis-9-hexadecene (cis-9-nonadecene) and cis-8-heptadecene (cis-8-heptadecene) [2] [5] Mild bitterness; flat function indications: relieving cough and asthma. Main bronchial asthma; cough usage dosage: oral administration: decoction, 3-9g. The cultural background of Phoenix-tailed orchid legends that Phoenix-tailed orchid is a very ancient magical plant. Its history, legend is that once after the failure of Phoenix Nirvana, because there is no new body, it is attached to a nearby plant. Then, they broke out of the ground, then opened to meet the Phoenix dance and swinging Phoenix tail orchid. Phoenix tail orchid is the national flower of Seychelles. Phoenix-tailed orchid is a kind of orchid, which grows mainly in the country of Serbia. The endangered Phoenix-tailed orchid has been designated as the national flower and was forbidden to take it out of the country in 1971. The flower language and symbolic meaning of Phoenix tail orchid: blooming hope Phoenix tail orchid picture
- Prev
Culture method of Camellia Impatiens
Temperature the most suitable germination temperature of camellia impatiens is 22 ℃-30 ℃, and the favorite growth temperature of the plant is between 15 ℃-32 ℃. The summer temperature is too high, so we should pay attention to cool it in a cool and ventilated place. The winter temperature is too low, so it is best to keep it indoors for maintenance.
- Next
II. Maintenance of Constellation bonsai
Flowers such as snow, colorful branches and leaves, beautiful Luoshi bonsai In addition to having better pruning methods, we should also pay attention to its maintenance methods. Reasonable maintenance is a necessary condition for better growth, and it is also the basis for pruning the most beautiful terracotta bonsai. 1. The right temperature and light for the flower bonsai body temperate
Related
- Fuxing push coffee new agricultural production and marketing class: lack of small-scale processing plants
- Jujube rice field leisure farm deep ploughing Yilan for five years to create a space for organic food and play
- Nongyu Farm-A trial of organic papaya for brave women with advanced technology
- Four points for attention in the prevention and control of diseases and insect pests of edible fungi
- How to add nutrient solution to Edible Fungi
- Is there any good way to control edible fungus mites?
- Open Inoculation Technology of Edible Fungi
- Is there any clever way to use fertilizer for edible fungus in winter?
- What agents are used to kill the pathogens of edible fungi in the mushroom shed?
- Rapid drying of Edible Fungi