MySheen

Culture method of sprinkling Ficus

Published: 2024-11-22 Author: mysheen
Last Updated: 2024/11/22, Because Ficus arborescens is a tropical plant, which is different from most temperate plants in China, some methods are needed to cultivate it. Then let the editor add some explanation. First of all, the choice of growing soil is required for the growth of banyan. The soil required for growth is fertile and has good moisture retention capacity.

Because Ficus arborescens is a tropical plant, which is different from most temperate plants in China, some methods are needed to cultivate it. Then let the editor add some explanation.

First of all, the choice of growing soil.

The soil needed for the growth of sprinkled banyan is required to be fertile and has good moisturizing ability. it is best to choose nutrient-rich culture soil or rotten leaf soil when potted.

Secondly, growth temperature and humidity

Because Sajin banyan likes the characteristics of high temperature and humidity, it is necessary to ensure the appropriateness of the temperature when cultivating Sajin banyan. In spring and summer, the temperature should be kept between 20 and 30 degrees, and in winter, the temperature should not be lower than 15 degrees. Otherwise, it will cause the leaves of the banyan to fall off. In addition, we should also give sufficient water to the sprinkled banyan, and often spray water on the surface of the leaves, so as to keep the leaves bright for a long time.

Finally, there is plenty of light.

Shajin banyan as a tropical plant, it is its nature to like sunlight, so it also needs plenty of sunlight in its growth process, and ensuring adequate light will also make its leaves luxuriant, bright and bright.

All right, the above is about the introduction of "is sprinkling golden banyan poisonous?". I hope the planting place and breeding method of sprinkling golden banyan will be helpful to the babies, thank you for your reading!

How to cultivate the banyan, the culture method and matters needing attention of the banyan

Flower bonsai network guide: today, the flower bonsai network editor brings you an article about how to raise Sajin banyan. Let's take a look at the breeding methods and matters needing attention of Sagin banyan.

Variable leaf tree (scientific name: Codiaeum variegatum), also known as Sajin banyan, Euphorbiaceae, is an evergreen shrub. Originated in Malaysia Peninsula, Nanyang Islands, Java, Australia and other tropical regions. The tree is one meter high. The leaf order is mutual, and the leaves are scattered with markings of other shapes and colors, with bright colors, such as yellow, red, green and purplish yellow. Because the leaves have color spots and change a lot, they are named "variable leaf wood".

The flowering period of leafy trees is between September and October.

Variable-leaf wood is often found in offices and so on, and it is planted as an indoor garden.

The juice of Euphorbia angustifolia is poisonous, and it has symptoms such as stomachache and diarrhea.

Sajin banyan is a small tree plant, and it is a common foliage plant in parks or courtyards in subtropical areas, so how to raise it?

Culture method of sprinkling Ficus

Sajin banyan is a kind of tropical plant, which likes high temperature and humid environment, and needs plenty of sunlight to grow, so it needs certain methods to cultivate it.

Selection of growing soil

The soil needed for the growth of golden banyan is required to be fertile and has good moisturizing ability. when potted, you can choose either culture soil or rotten leaf soil, so that golden banyan will absorb nutrients from the soil and contribute to growth.

Growth temperature and humidity

Sajin banyan is a kind of plant that likes high temperature and humidity. it is necessary to ensure the appropriateness of temperature when cultivating Sajin banyan. Generally, in spring and summer, the temperature should be kept between 20 and 30 degrees, and in winter, the temperature should not be lower than 15 degrees. Otherwise, it will make the leaves of Sajin banyan yellow, suffer frost damage, and seriously cause the leaves to fall off.

Sprinkling Jinrong likes to be moist and afraid of drought, so it is necessary to give it enough water, and to spray water on the surface of the leaves from time to time to keep it bright and bright. Pay attention to in winter, reduce the amount of water, grow the soil can be semi-dry and semi-wet or keep dry.

The light of growth

Sprinkling banyan likes the sun, so it also needs enough sunlight to ensure that sufficient light will make the leaves grow luxuriantly, bright and bright, and the lack of light will cause the leaves to turn yellow, dim or even fall.

Matters needing attention in the culture of sprinkled banyan pay attention to the watering process of sprinkling banyan

In the growing period of gold banyan, because the leaves grow rapidly and need a lot of water, it is necessary to water enough, and pay attention to reducing the number of watering and watering water in winter.

Pay attention to fertilization

Sajinrong should be fertilized once a month during the growth period and stop fertilizing until winter.

Pay attention to pruning

The pruning of the sprinkled banyan should be carried out during the winter dormant period, where there are diseases and insects, withered or overdense branches. Cut off these places to ensure the healthy growth of the whole plant.

Pay attention to pest control

The most common diseases and insect pests of Sajin banyan are black mildew and anthrax. Note that these two diseases will cause yellow and spotted leaves, gray mold, and weak wilting in the growth state. At this time, it is necessary to speed up prevention and control, and can be sprayed with 600 times more than 50% carbendazim wettable powder.

Note that in order to reduce the incidence, pay attention to ventilation, to ensure that sprinkling banyan can breathe fresh air, if poor ventilation, sprinkling banyan will appear shell insects and red spider pest phenomenon, then it is necessary to use 1000 times omethoate EC spray.

Control of common diseases and insect pests in Sajin banyan

Although the sprinkled banyan is easy to manage, diseases and insect pests will not invade it because of its beauty and robust growth. This article is a simple arrangement of the common diseases and insect pests and control methods of Sajin banyan.

Black mildew, a common disease of Ficus arborescens

Black mold is also known as coal fouling disease and soot disease. It mainly harms the leaves of plants. Imagine what a disappointment it would be to have a black mildew layer instead of thick green or golden yellow on the beautiful leaves of Shajin Rong, the baby of the family.

Anthrax

Anthracnose is a kind of disease that often occurs in garden plants, which mainly harms the leaves of plants, and sometimes harms stems and twigs. In severe cases, it may make more than half of the leaves withered and black, and even cause plant death.

Red spider, a common pest of Sajin banyan

The harmful way of the red spider is to pierce the mouthparts into the leaves to suck the juice, so that the chlorophyll is destroyed, the leaves show grayish yellow spots or patches, and the leaves are orange, shedding, or even shedding.

Shell worm

Scale insects often gather on branches and leaves and suck plant sap for a living. In serious cases, they will cause branches to wither or the whole plant will die. In addition, the secretions of shell insects can also induce coal fouling disease.

Control methods of diseases and insect pests of Ficus ficus L.

At ordinary times, it should be ventilated and transparent.

In the early stage of the disease, the diseased leaves should be cut off and the surrounding environment should be cleaned in time to prevent expansion. When the disease occurs, it can be sprayed with 50% carbendazim wettable powder 600 times.

Pest control

Usually should pay more attention to observation, found that the abnormal color of the leaves should be paid attention to, remove insect leaves, timely spraying.

When red spiders and aphids appear, 1000 times dimethoate can be sprayed, and oil emulsions diluted 100 to 150 times can be sprayed against scale insects.

Classification of common varieties of Ficus arborescens

Sprinkled banyan, that is, variable-leaf wood, the leaves of different colors are often dotted with ever-changing spots and markings. The shape of leaves is varied, which varies from variety to variety. So, what are the common varieties of Sajin banyan?

Euphorbia angustifolia changed into leaf wood

The leaf is hastate, the leaf surface is dark green to dark green, the vein and edge of the leaf are yellow or pink markings, and even the whole leaf is golden yellow, the color is changeable and gorgeous.

The weaver becomes a leaf wood.

Leaves broadly lanceolate, leaf margin skin-like convolute, leaf veins yellow, leaf margin sometimes yellow, often embedded with color markings.

Fine leaf to leaf wood

The leaves are banded and slender. It is dark green with yellow spots.

Caixia turns into leaf wood

The leaf is large, ovoid to broadly lanceolate, the new leaf is golden yellow, or with yellow or purplish red veins, the back of the leaf is red halo.

Golden light changing leaf wood

Leaves alternate, long oval in shape, apex pointed, base cuneate, leaf surface with irregular golden spots.

Culture methods and points for attention of Ficus alternata and Ficus arborescens

Family and genus: Euphorbiaceae Euphorbiaceae flowering period: summer flower language: unpredictable use hint: suitable for families, shopping malls and other public places to maintain home display: can be placed on the windowsill, balcony.

Light

Like the environment with plenty of sunshine, it can adapt to a wide range of light, and can grow in semi-shade and full-day sunshine in spring and autumn.

Temperature

The suitable growth temperature is 20-30 ℃.

Soil

The requirement of soil is not strict, and it is better to cultivate soil with slightly sticky and good drainage. The basin soil can be mixed with garden soil, rotten leaf soil and river sand at the proportion of 8:1:1.

Watering

Watering should be sufficient during the growth period, keep the basin soil moist, and spray water to the page frequently in summer.

Fertilizer application

Generally speaking, the rotten thin cake fertilizer liquid or compound flower fertilizer containing nitrogen and phosphorus should be irrigated every 1-2 weeks.

Matters needing attention

The causes and control methods of "bald foot" of variable leaf wood: 1. Lack of nutrients. The potted soil for the cultivation of Alternaria alternata has not been changed for a long time, but the plant is growing day by day, and the nutrients in the potted soil have been nearly exhausted, which can not meet the needs of plant growth. 2. Consolidation of basin soil. Due to the heavy stickiness of the basin soil, consolidation, poor drainage, stagnant water in the basin, the root can not get oxygen and began to rot. 3. Lack of light. The variable leaf wood likes the sunny environment, if the light is insufficient, it will affect its photosynthesis. 4. Improper measures to keep warm in winter. The variable-leaf wood is not resistant to cold, so the northern area should be moved into the room after autumn to prevent cold, and the room temperature should be kept at about 20 ℃, and the night temperature should not be lower than 15 ℃.

 
0